Plastering Walls With Sand Cement short PLASTERING TUTORIAL STUCCO SAND & CEMENT PLASTERING
HTML-код
- Опубликовано: 6 фев 2025
- plastering concrete block / brick wall with sand and cement aka stucco ready for the skimming plaster to finish it off, This is the undercoat for the top coat of finishing plaster gypsum for skimming #render #sandandcement #plastering
HOW TO RENDER SAND AND CEMENT A WALL READY FOR PLASTER OR TILES ON AN OLD WALL
Hi everyone this is a video in which I show you a lot of tips on how to go about re rendering an old dusty wall that had loose plaster on it covering the basics and the must dos and don'ts this demo could help the diyer a lot or even a homeowner understand what must be done.
If the video helped or you just like watching plastering be sure to thumbs up and mac scribe for more mac attacks :):)
Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
The pointsman hawk = amzn.to/2O1nKmp
Refina trowel pack and holder = amzn.to/33PbCvi
microphones used =
USB Microphone MAONO = amzn.to/2MQLJnK
Lavalier = amzn.to/33He7iR
Blue Microphones Snowball Microphone - Black = amzn.to/2P0OINg
camera used = amzn.to/34Nx8AX
All amazon links are affiliated links will cost no extra to buy from but we might get a %
tools links direct
www.refina.co.uk/
How to sand and cement render concrete block wall 1st coat scratch coat DIY
• How to sand and cement...
Find us and like us here
/ macplasterin. .
Tweet us here
/ macplastering
/ macplasteringservices
our amazon store affiliate www.amazon.co....
n the video I use a lot of tools I use the refina mega mixer to make the sand and cement in the large 40 liter refina tube I use a refina trowel with a pointsman hawk to apply the render an aluminum straight edge or know as a refina feather edge and a 1200mm speedskim on my skimming to get the wall straight and ready to be floated. Then I just use a float to rub it up which has nails though it to give a key for the next coat or tiles.
Cheers mac going to have a go plastering the back of the shed the weekend you make it look easy
What type of finish are you going for mate it gets easier as time goes by but still hard old work for sure
@@macplastering thanks for replying I’m down in Wexford here I done a self build over 4 years in a year now ,I’m going white sand cement and a shovel of lime,what about plastering onto mass concrete walls will I put thistlebond on first before scutting
I had no problem getting men during Covid hard to get any trades people now I’ve a lot of mass concrete walls around the house don’t know to plaster them or just grow Ivy up them
Are the garden walls ? up here if block is fresh we can 1st coat straight on to them after wetting down some Just uploaded a video on the chimney top 1st coat might be of interest ?
Este es un verdadero plaster se le nota en el manejo de la herramienta
Thank you my friend
Need to get me one of those feather edgers
find them great for the bases outside helps set it of some
What your go to trowel, any preference
Refina on the most mate
A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet
how much per room do plasters charge please standard room 4 meters
all depends where you are
Birmingham
@@sabkhan8347 not sure what them fellas are charging over there mate
Made short work of that mate. Was that just a 4-1 with plasticiser?
It was mate a little stiff but OK for this we wall
A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet
What feather edge you using there Mac?
Nuce refuna mate new so light and sharp
A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet
Whats the refina trowls like mate do they take alot to break in?
Can take a few weeks floating but when broken in I wouldn't leave the house without it =]
@@macplastering are they stiff mate or have they got abit flex in the blade ? I tried one of them nela trowls but it was like using a brick
@@Frankieee-bj6nu stiff enough and then they do have a more flexi it's good to I like a solid one for coating and 1st 2nd trowel then suoerflex
@@macplastering I’ll give one a try cheers bud what size is the one your using in the video ?
@@Frankieee-bj6nu think it's 14
так собі майстер...
Thank you my friend :)