Just started renovations on a house i purchased at auction, I've been watching all your RUclips videos and I can honestly say they have learnt me so much im already plastering myself and ide say I'm a good 7out10 and still getting better thankyou for these videos
Ditto. Yet to block up the door in the kitchen but problem increases because wall is 600mm thick , old house! Now have a plan as walls are bowed and covered in thick gloss painted artex.
Top bloke, your tutorials are honest and truthful. Excellent plasterer, keep up the excellent work and glad to see you are helping people out there that just want to learn.
Thank goodness I watched this video as I'm going to be plastering an uneven wall this week (1 plasterboard was thinner than the rest) and I'm going to be setting up a screed bar in the corner. Brilliant video, perfect for beginners like me as well, thanks Blaine 👍
Just wanted to say thanks for the videos.. I fit bathrooms and have picked up a few tips and tricks myself so your helping other people out, not just plasterers 👍
Great bit of work as usual.Donkeys years ago when I was starting out,this how I was taught.Obviously minus the laser.Set a screed properly and it doesn’t matter how big or how pissed the wall is,it comes out pucker
Love your channel and subscribed... question please,if I do a 1 coat plastering job on good condition painted white wall do I have to put some sort of gripping agent on the wall first ...cheers Nathan.
@@PlasteringForBeginners done some solid work before and this seems like it would be super easy compared to constantly having to check for high and low spots
Thanks for making this, really helpful! I’m am thinking of attempting this at my place before I tile. It’s a L-shaped space under and beside upper cabinets so hopefully I can get it right!
Hi Blaine, That's awesome your own mug for a brew!! Impressive video, that laser light is great. Hours of fun with that ! Great work you make it look so easy. Only a top tradesman can do that. xx
here in the US we use redwood strips 3/8 x 2" skim the whole wall and set the strips into the mud on the highpoints plumb, let it set up, screed off using the strips, cut out the strips and fill, you can also use these to square up walls to each other, we do this to float showers for tile but same process applies to anything. ......once basecoat is square, flat and plumb you can finish it with anything.....coat of plaster, Tile, stone, marbel, etc works really well and is basic and quick, tile setters been doing this forever in bathrooms.....walls are never square or plumb.....even if it was perfect when built they shift and move over time
very informative video, i work on alot of old crooked houses. one point however, you dont know that corner is square, you know the wall is plumb, but thats it.
Several good tips in there mate. The expanding foam idea is a winner. It’s like a modern take on the traditional dot and screed method. Enjoyed the vid as always 👍
Really helpful, I took the tiles off a half-tiled wall in an 1800s house and pretty much all the plaster came with it leaving a rough white cement coat underneath, I’m only going to be wooden panelling on top so it’s hopefully a perfect wall to practice bonding plastering on with some 5mm screed bars
Hello brother, how's it going?? Ha yeah mate late nights and early mornings - hopefully it all pays off before it kills me 🤣 Great hearing from you Calvin, hope you're well my friend!
Hose the blocks down beforehand and you should be fine. Hardwall naturally crazes a little anyway but reducing the blocks with water beforehand helps massively 👍
Hi, thanks for these videos they are brilliant for newbies like me, what method is best for plastering kitchen walls, tiles off, tile adhesive removed best I could, existing plaster, thanks. Also, where best to purchase that feather edge thanks
I have uneven ceiling so this method looks very handy. Only thing is I don’t have long screed bars coz I am a simple diy. I only have 11 inch trowel so I am struggling but thank you for your info.
Hi. I have a wall going up my stairs. It looks like it belly’s out halfway up. What’s best way to level it off please so build up other area and what product best to use please?
Where you are using a straight edge horizontally; is it not necessary to put in two screed bars to ensure the bonding is plumb by the reveal? I know you mentioned about doing more, but as you didn't for this, you just guage it by eye and straight edge? Would corner beading be required?
Great instructional video! I'm in USA , NYS. Do you know what products I can use for the bonding material and the PVA you mentioned. Also is the PVA a binder for the bonding coat. My project is having to go over a very uneven and out of plumb drywall, we call it sheet rock. Will your materials attach to sheetrock, or gypsum board? Thank you very much, Kevin
serious question how much is a tadge? I have a small piece to do under a window so probably need to make a bar about a third of what you have done. Cheers Blaine
Awesome job, I was going to ask about different surfaces on one wall, how much cement did you put in with the bonding? as I find it takes ages to go off which is fine when you have a big area.
Nice video, So how do you go about making sure all the walls are square to one another? For example, you have one square corner but how would I go about making sure the opposing 2 corners to this corner are also square to this corner and walls flat ?
Great video blain I'm doing my kitchen at the moment so this video is great for me cheers . What about the right angle for corner cabinet I've made a big square from a sheet of ply. What do you think.
Awesome video seeing your process. Do you have videos on how to get a good join between walls and ceiling? I have ceilings that have been re-plastered after having the old ones pulled down but I have these horrible gaps and even through the walls are going to be skimmed, at the moment they've been left a bit of a mess.
Hi been watching some of your videos - reall good thanks - I have to fill an external doorway which has been bricked up with thermalite and breeze blocks. The doorway is in a corner and there is a gap to fill which varies from 50mm to 70mm (quite uneven) to bring it to the line of the existing wall. Would you recommend batten and plasterboard for this? Also would I lay the surface of the plasterboard back from the line of the wall by a few mm for finish coat?
So, I have a wonky wall that is basically 30mm out at the bottom at one side of the wall and 20 at the top at the other end of the wall. How does your method work with that to get it plumb
Brilliant video. Just a question. Do you need to key your screed bars just before they go off? I'm Just thinking about the final top coat of plaster and how it will "stick" to them. Many thanks mate
Good video thanks for making it, but I just wondered why you didn't have to tape over the gaps by the plasterboard edges before you plastered across the area? ...Won't that show crack lines when it dries out?
Hi, I've pva'd the walls twice and applied 1st coat of Multi finish and Flattened with ox speedskim, I've then applied my 2nd coat and when I attempt to flatten the 2nd coat the plaster drags across the wall. I left it slightly longer to go off but then the plaster was literally drying in places but still dragging in others. I've never experienced this before and it didnt happen on a wall in the same room that had a bonding coat. Any advice would be great thanks.
If the wall is really dry and porous you need to soak it more with PVA. If you start applying from the top of the wall and keep applying in the same horizontal until the wall can’t take anymore and drips start running down it’s then you move down the wall, keep applying till it’s saturated then move down the wall a bit further. I’m a chippy myself but I work closely with a plasterer who gets all excited if a wall absorbs buckets of PVA. Hope that helps.
Coming back to this Blaine, and after buying the City & Guilds plastering book, is this pretty much the old screed dot method I've read in the book? Though in the book they use small pieces of timber (dots) bedded in sand and cement. Btw, fourth ever practice is coming up! Found a better wall in my old house to practise on now 😄
First time plastering, been watching your videos for ages as “research” 😂When you say let the screed bar dry completely.. how long do I know if it’s dry if it has some cement in it? Can I plaster with bonding the same day as making the screed bar? Or do I need to leave it a day or two?
Thanks for the video. I have a part of the kitchen walls (plaster on breezeblocks) which goes in and was intended originally for a fridge to slip into it. It's supposed to be 80cm wide and 60 cm deep, from floor to ceiling. I wanted to buy a pre-build cabinet to slip into the hole but found that the walls are not 100% flat. In some places they are 79.5cm, 79.7 cm etc. How do I reduce the thickness of the plaster so that I can fit the 80cm cabinet into this hole? I thought of buying a heavy duty rotary sander with 80 hard discs.
Can you put bonding on the ceiling also ? If you have uneven ceiling lot's of different thicknesses of plaster board. Can you level this up with the bonding?
Great video, I have a similar issue in a bathroom, Ive 10mm to build out on a wall to even out the windowsill. Ive heard bonding isnt the best for a wet area such as a bathroom, is it possible to use plaster to 10mm or build it up in thinner layers?
@@PlasteringForBeginners thank you for your quick response. Ive been using Toupret decorators skim coat to fill the walls, its pretty pricey at £35 for 10KG, would the BG Hardwall be a good material to use instead of this?
To be honest, if it's an old stone build then your best using a lime based plaster because it allows the walls to breath. Using new materials will trap the moisture.
Great video once again Blaine! I'm pretty good at bonding and skimming plaster, but I'm awful at getting a scratch coat of render nice and flat. I've only managed to render small walls before to a perfectly flat surface although I want to give it a go rendering the rear garden walls of the property. I've been putting it off because i dont want a wavy old finish. Would you recommend maybe fixing vertical battens to the wall, spaced the length of my straight edge, and rendering inbetween the battens? Then once its scratched and gone off, unscrew the battens and fill in between where the battens were fitted? That could give me a perfectly flat 1st scratch coat, but would filling in where i removed the battens be prone to cracking on the future, where its not all joined together sorta thing? Id be fine doing the 2nd float coat of render, its just the initial scratch coat im worried about because we have bricks poking here and there from repairs over the years (solid wall thats been bodged) lol. Appreciate it if you reply and keep up the banging videos mate, said it before but therr the simplest and most informative videos on the tube 😁
Hi mate! Thank you for your kind words my friend, I really appreciate that. It means a lot to me! That process would work pal - there's nothing wrong with what you've said there. It's not far from what were doing here really so it should work a treat. Let me know how it goes. Great hearing from you and thanks again for watching. Cheers 👍
@@PlasteringForBeginners Hey mate, thanks for getting back to me about the render question! I really appreciate it 😁 Its because ive plastered tons but render, im still a noob at lol. I reckon maybe a question and answer video would be awesome, if you answered viewers questions on a video. Kinda like a ask Blaine once in a while. Anyway keep doing what you're doing mate, I've learnt so much from you and im sure many others have too! I always smash a like on them 👍🏼
Hi Blaine great video mate. What would you use if the low points are to high for plaster board cut offs? Sorry if it’s a stupid question. Thanks in advance
When I did this the bonding pulled off the wall when I ruled it, instead of giving me a straight finish I had big holes of missing bonding. unless I mixed it very thin, then it makes a big mess slipping and falling everywhere 😢
Hi Blaine another great video, I'm building my own extension and about to start the plastering 😱 which tools would you recommend bearing in mind that the chances of using again are low to never, can I use a good straight edge like a skirting board!! Any advice would be great
Buy spatulas (32” and a longer one if possible). Costly but you could sell them on after and as a diyer they make a world of difference to my finish! And watch LOTS of RUclips!!!
How do you make an old outside curved corner edge look new again with a corner bead and perfect 45 corner? Do you add more or take old off and start again?
Hi Blaine, If I was to sand and cement an interior wall with very little prior experience, could I do small sections at a time using "stop bead" from floor to ceiling to screed between each section? And Is it ok to just stick the bead on with blobs of gripfill to plumb them up? Thanks
Hands down the most informative plastering videos on RUclips
Thank you mate, that means a lot. Cheers!!
Just started renovations on a house i purchased at auction, I've been watching all your RUclips videos and I can honestly say they have learnt me so much im already plastering myself and ide say I'm a good 7out10 and still getting better thankyou for these videos
I am in this exact situation, plastering a bricked up doorway in a kitchen, you've made my life so much easier! cheers
Ditto. Yet to block up the door in the kitchen but problem increases because wall is 600mm thick , old house! Now have a plan as walls are bowed and covered in thick gloss painted artex.
Top bloke, your tutorials are honest and truthful. Excellent plasterer, keep up the excellent work and glad to see you are helping people out there that just want to learn.
Thank you mate. I really appreciate that 👍
Thank goodness I watched this video as I'm going to be plastering an uneven wall this week (1 plasterboard was thinner than the rest) and I'm going to be setting up a screed bar in the corner. Brilliant video, perfect for beginners like me as well, thanks Blaine 👍
Glad it's helped my friend!! Hope it went well 🙂
You're the man! By far the most informative and helpful advice for real-world situations. Thanks.
Wow you make it look so easy. Thanks for sharing 👍.
Just wanted to say thanks for the videos.. I fit bathrooms and have picked up a few tips and tricks myself so your helping other people out, not just plasterers 👍
Great bit of work as usual.Donkeys years ago when I was starting out,this how I was taught.Obviously minus the laser.Set a screed properly and it doesn’t matter how big or how pissed the wall is,it comes out pucker
used this exact method today and worked very well! thanks for all the videos and instruction they are very useful
Really helpful as my living room wall is in and out all over the place. You gave me the basic,got it Thanks.
Love your channel and subscribed... question please,if I do a 1 coat plastering job on good condition painted white wall do I have to put some sort of gripping agent on the wall first ...cheers Nathan.
You are amazing, thank you so much for all the videos you post. It is greatly appreciated.
this has helped me a lot with doing two walls that were are a weird angle around a window. Many thanks
Very unique video and very informative, I never would have thought to make screed bars. Cheers for the video Blaine👍🏼
Thanks for watching Luke - I really appreciate that. Cheers pal 👍
@@PlasteringForBeginners done some solid work before and this seems like it would be super easy compared to constantly having to check for high and low spots
Another great video blane
So very informative I'm learning loads following you mate 👍
Cheers pal! Glad to hear it's helping
That was made to look so easy. THANKS ALOT
Not a problem pal!!
Thanks for making this, really helpful! I’m am thinking of attempting this at my place before I tile. It’s a L-shaped space under and beside upper cabinets so hopefully I can get it right!
Hi Blaine, That's awesome your own mug for a brew!! Impressive video, that laser light is great. Hours of fun with that ! Great work you make it look so easy. Only a top tradesman can do that. xx
Ha thanks Carol, I really appreciate that! Hope you're well and safe. Look after yourself x
Watched this guys second video today. Brilliant way of explaining it.
here in the US we use redwood strips 3/8 x 2"
skim the whole wall and set the strips into the mud on the highpoints plumb, let it set up, screed off using the strips, cut out the strips and fill, you can also use these to square up walls to each other, we do this to float showers for tile but same process applies to anything. ......once basecoat is square, flat and plumb you can finish it with anything.....coat of plaster, Tile, stone, marbel, etc
works really well and is basic and quick, tile setters been doing this forever in bathrooms.....walls are never square or plumb.....even if it was perfect when built they shift and move over time
Great tips mate it's always good to learn something new 👍👍
Thanks mate!!
very informative video, i work on alot of old crooked houses. one point however, you dont know that corner is square, you know the wall is plumb, but thats it.
Several good tips in there mate. The expanding foam idea is a winner. It’s like a modern take on the traditional dot and screed method. Enjoyed the vid as always 👍
Thanks mate, I really appreciate that!! Thank you for watching 👍
Great video. Really good tip with the foam
Genius! Thank you - really informative 👌👍
Great vid blain, did same thing on an old cottage wall but put battens vertically every metre then filled between them. Worked a treat.
That's the one mate!!
Great tip there using the foam and plasterboard to set up screeds to work off of. Great work man
Cheers mate! Glad to hear you found it useful!
best video i found yet , talking through
Really helpful, I took the tiles off a half-tiled wall in an 1800s house and pretty much all the plaster came with it leaving a rough white cement coat underneath, I’m only going to be wooden panelling on top so it’s hopefully a perfect wall to practice bonding plastering on with some 5mm screed bars
Great video I don't understand thumbs down idiots.Thank you for your time 👍.
Haha thanks matey. I really appreciate that 😊
Thank you kind sir! Saved me thousands!!!
Another great video from my brother from another mother looking like a late night video working on the gaff look good once it’s done 👍
Hello brother, how's it going?? Ha yeah mate late nights and early mornings - hopefully it all pays off before it kills me 🤣 Great hearing from you Calvin, hope you're well my friend!
Plastering For Beginners I’m all good mate I’ll be back on the trowel this week got my own house to be getting on with landing and stairs 🤟
Hi blane, how do I hardwall on to lightweight blocks without it crazing ? Maybe I'm using the wrong product, many thanks
Hose the blocks down beforehand and you should be fine. Hardwall naturally crazes a little anyway but reducing the blocks with water beforehand helps massively 👍
For the plumb lines, could you also use shims or packers along with adhesive to achieve the desired depth?
Excellent little tip with the foam blocks great idea
Thanks pal 👍
Nice job mate
Hi, thanks for these videos they are brilliant for newbies like me, what method is best for plastering kitchen walls, tiles off, tile adhesive removed best I could, existing plaster, thanks. Also, where best to purchase that feather edge thanks
Great video Blaine, very informative, cheers.
I have uneven ceiling so this method looks very handy. Only thing is I don’t have long screed bars coz I am a simple diy. I only have 11 inch trowel so I am struggling but thank you for your info.
Do you need to PVA absolutely all the wall or just the exposed blocks?
Hi. I have a wall going up my stairs. It looks like it belly’s out halfway up. What’s best way to level it off please so build up other area and what product best to use please?
Great video Blaine. Thank you!
Just want I needed cheers a million B! Top bloke!
Not a problem matey! Good luck 👍
Hi Blaine. Where can i get your merch from please? Thanks.
Great video, good advice, especially to do when trying to plaster old properties 👍
Thanks for watching matey. Cheers 👍
Where you are using a straight edge horizontally; is it not necessary to put in two screed bars to ensure the bonding is plumb by the reveal? I know you mentioned about doing more, but as you didn't for this, you just guage it by eye and straight edge? Would corner beading be required?
Clever stuff young man 👊
Thank you pal. Happy NY 👍
@@PlasteringForBeginners 👊
Love your vids. I would just glue some packers underneath the offcuts of plasterboard though? Might save quite a lot of time
Great instructional video! I'm in USA , NYS. Do you know what products I can use for the bonding material and the PVA you mentioned. Also is the PVA a binder for the bonding coat. My project is having to go over a very uneven and out of plumb drywall, we call it sheet rock. Will your materials attach to sheetrock, or gypsum board? Thank you very much, Kevin
Thank you great video .informative great
serious question how much is a tadge? I have a small piece to do under a window so probably need to make a bar about a third of what you have done. Cheers Blaine
Awesome job, I was going to ask about different surfaces on one wall, how much cement did you put in with the bonding? as I find it takes ages to go off which is fine when you have a big area.
I have a situation much like this now. How would you tackle this when the wall would be sitting slightly proud of the door liner?
Nice video,
So how do you go about making sure all the walls are square to one another?
For example, you have one square corner but how would I go about making sure the opposing 2 corners to this corner are also square to this corner and walls flat ?
Great video blain I'm doing my kitchen at the moment so this video is great for me cheers . What about the right angle for corner cabinet I've made a big square from a sheet of ply. What do you think.
Hi mate, great hearing from you again! You can buy big squares which are really handy to have on a job but yeah that works pal 👍
Awesome video seeing your process. Do you have videos on how to get a good join between walls and ceiling? I have ceilings that have been re-plastered after having the old ones pulled down but I have these horrible gaps and even through the walls are going to be skimmed, at the moment they've been left a bit of a mess.
Thanks for the video really helpful. Can I ask though if you would plaster over this as in skin the whole wall or not. Cheers jon
Is that also the finish coat or do you apply a finish coat to what you did here?
Hi been watching some of your videos - reall good thanks - I have to fill an external doorway which has been bricked up with thermalite and breeze blocks. The doorway is in a corner and there is a gap to fill which varies from 50mm to 70mm (quite uneven) to bring it to the line of the existing wall. Would you recommend batten and plasterboard for this? Also would I lay the surface of the plasterboard back from the line of the wall by a few mm for finish coat?
we dont have this bonding stuff in australia :( how do you make it?
So, I have a wonky wall that is basically 30mm out at the bottom at one side of the wall and 20 at the top at the other end of the wall. How does your
method work with that to get it plumb
love the packers, however what about a circular stairwell would you use just more packers at closer intervals???
Exactly that pal - but it’s a totally different ball game doing curves. Tricky business 👍
What laser is that mate and how much
It's just from Amazon! I'll check later when I'm back at the gaff 👍
Brilliant video. Just a question. Do you need to key your screed bars just before they go off? I'm Just thinking about the final top coat of plaster and how it will "stick" to them. Many thanks mate
Good video thanks for making it, but I just wondered why you didn't have to tape over the gaps by the plasterboard edges before you plastered across the area? ...Won't that show crack lines when it dries out?
What is the straight edge used for ruling off?
This is a Featheredge mate - they are the only straight edges I use. They’re great 👍
Hi, I've pva'd the walls twice and applied 1st coat of Multi finish and Flattened with ox speedskim, I've then applied my 2nd coat and when I attempt to flatten the 2nd coat the plaster drags across the wall. I left it slightly longer to go off but then the plaster was literally drying in places but still dragging in others. I've never experienced this before and it didnt happen on a wall in the same room that had a bonding coat. Any advice would be great thanks.
If the wall is really dry and porous you need to soak it more with PVA. If you start applying from the top of the wall and keep applying in the same horizontal until the wall can’t take anymore and drips start running down it’s then you move down the wall, keep applying till it’s saturated then move down the wall a bit further. I’m a chippy myself but I work closely with a plasterer who gets all excited if a wall absorbs buckets of PVA. Hope that helps.
Thank you for again for a great lesson very informative... uve taught me a loads about plastering just from watching your videos... cheers 👊
Thanks for watching pal and I'm glad it's helping you out my friend. Good luck with your plastering 👍
Coming back to this Blaine, and after buying the City & Guilds plastering book, is this pretty much the old screed dot method I've read in the book? Though in the book they use small pieces of timber (dots) bedded in sand and cement.
Btw, fourth ever practice is coming up! Found a better wall in my old house to practise on now 😄
Suppose you can d this for international rendering as well
Love your videos mate. Just as entertaining as watching Marvel movies at the cinema!
Solid information, end to end.
Thank you so much mate. I really appreciate that 😊
Great nicely explained
Hi Blaine how long after you laid up your multi do you wait before you go over it with your speedskim?
First time plastering, been watching your videos for ages as “research” 😂When you say let the screed bar dry completely.. how long do I know if it’s dry if it has some cement in it? Can I plaster with bonding the same day as making the screed bar? Or do I need to leave it a day or two?
Could a similar method be used for external rendering on old walls i.e pebble dash?
Amazing video
Thanks for the video. I have a part of the kitchen walls (plaster on breezeblocks) which goes in and was intended originally for a fridge to slip into it. It's supposed to be 80cm wide and 60 cm deep, from floor to ceiling. I wanted to buy a pre-build cabinet to slip into the hole but found that the walls are not 100% flat. In some places they are 79.5cm, 79.7 cm etc. How do I reduce the thickness of the plaster so that I can fit the 80cm cabinet into this hole? I thought of buying a heavy duty rotary sander with 80 hard discs.
How thick can you build up bonding without it failing?
Hi Blaine, where is the best place to position lighting when plastering a ceiling?
I just place it in the middle of the room pointing up - well needed this time of the year ha!
@@PlasteringForBeginners thank you.
Can you put bonding on the ceiling also ? If you have uneven ceiling lot's of different thicknesses of plaster board. Can you level this up with the bonding?
Why not. The plaster doesnt know its on the ceiling or a wall
Would the use of Multi-finish plaster be possible, for the job of skimming a plasterboard and render wall? Helpful videos! thx
Yeah mate - that's what I recommend you should use 👍
Great video, I have a similar issue in a bathroom, Ive 10mm to build out on a wall to even out the windowsill. Ive heard bonding isnt the best for a wet area such as a bathroom, is it possible to use plaster to 10mm or build it up in thinner layers?
You can use sand cement if you're worried or even BG Hardwall. Just avoid Bonding 👍
@@PlasteringForBeginners thank you for your quick response. Ive been using Toupret decorators skim coat to fill the walls, its pretty pricey at £35 for 10KG, would the BG Hardwall be a good material to use instead of this?
great work. What about really old stone walls. Will the PVA + Bonding coat work just as well?
To be honest, if it's an old stone build then your best using a lime based plaster because it allows the walls to breath. Using new materials will trap the moisture.
Great video once again Blaine! I'm pretty good at bonding and skimming plaster, but I'm awful at getting a scratch coat of render nice and flat. I've only managed to render small walls before to a perfectly flat surface although I want to give it a go rendering the rear garden walls of the property. I've been putting it off because i dont want a wavy old finish. Would you recommend maybe fixing vertical battens to the wall, spaced the length of my straight edge, and rendering inbetween the battens? Then once its scratched and gone off, unscrew the battens and fill in between where the battens were fitted? That could give me a perfectly flat 1st scratch coat, but would filling in where i removed the battens be prone to cracking on the future, where its not all joined together sorta thing? Id be fine doing the 2nd float coat of render, its just the initial scratch coat im worried about because we have bricks poking here and there from repairs over the years (solid wall thats been bodged) lol. Appreciate it if you reply and keep up the banging videos mate, said it before but therr the simplest and most informative videos on the tube 😁
Hi mate! Thank you for your kind words my friend, I really appreciate that. It means a lot to me! That process would work pal - there's nothing wrong with what you've said there. It's not far from what were doing here really so it should work a treat. Let me know how it goes. Great hearing from you and thanks again for watching. Cheers 👍
@@PlasteringForBeginners Hey mate, thanks for getting back to me about the render question! I really appreciate it 😁
Its because ive plastered tons but render, im still a noob at lol.
I reckon maybe a question and answer video would be awesome, if you answered viewers questions on a video. Kinda like a ask Blaine once in a while.
Anyway keep doing what you're doing mate, I've learnt so much from you and im sure many others have too! I always smash a like on them 👍🏼
Tack mesh on behind your battens and the channels you fill in afterwards will key to the mesh already joined to the render either side
Hi Blaine great video mate. What would you use if the low points are to high for plaster board cut offs? Sorry if it’s a stupid question. Thanks in advance
You can use packers. You can buy them with multiple thicknesses which can be used for any situation. Thanks for watching pal 👍
Brilliant cheers Blaine.I assume you mean the plastic packers that window fitters use etc
When I did this the bonding pulled off the wall when I ruled it, instead of giving me a straight finish I had big holes of missing bonding. unless I mixed it very thin, then it makes a big mess slipping and falling everywhere 😢
Was it because the wall was painted?
Hi Blaine another great video, I'm building my own extension and about to start the plastering 😱 which tools would you recommend bearing in mind that the chances of using again are low to never, can I use a good straight edge like a skirting board!! Any advice would be great
Buy spatulas (32” and a longer one if possible).
Costly but you could sell them on after and as a diyer they make a world of difference to my finish!
And watch LOTS of RUclips!!!
Can I use bonding for the inside walls in my garage don't want to go down the sand and cement route blane
Do you have any tips/tricks for skimming over artex
Don't. Board over the top of it
Thank you for the video! I'm learning a lot from you. Why wouldn't you use a plastering profile in this situation instead of the plates and foam?
I'll be honest...I didn't have any so this was the best best option 😂😂 Thank you for watching my friend. I really appreciate it!
can i actually stick a straight wood plank for that beam line and then plaster over all? In a way make one sided frame use as a guide to start from?
Is the packer thickness the same size has the difference in walls if you get what I mean great vid
It was thinner but you pack it out with the foam to get it to the right thickness. Hope this helps 👍
Very helpful 👍 keep it up
Hi Plastering for beginners. If you apply hardwall plaster to plasterboard, will it adhere to the board or will it fall off?
Yes its more than fine
It will stick but BG Bonding is a better product to use
Thanks for the reply plastering for beginners
How do you make an old outside curved corner edge look new again with a corner bead and perfect 45 corner? Do you add more or take old off and start again?
Useful info as ever ty.
Thanks matey! I really appreciate that 👍
Use plaster screeds using wooden lathes length of feather edge
Hi Blaine, If I was to sand and cement an interior wall with very little prior experience, could I do small sections at a time using "stop bead" from floor to ceiling to screed between each section? And Is it ok to just stick the bead on with blobs of gripfill to plumb them up? Thanks