Great video! For manicures that need to be repaired, this portable machine is still needed. I bought this small manicure machine from the renhotecic brand not long ago, and I can operate it myself, and the effect is quite good. Everyone can try it.
NON WORKING DREMEL TOOL SOLVED: I just now fixed the one I bought yesterday after it wouldn't turn on. Just do this, and it's easy!.. 1) Unplug the dremel and remove the 4 screws to open the tool just like he did in this vid 2) Carefully rotate the speed control wheel On and Off and take note on how it operates the spring and lever. (This is where the issue is, the lever doesn't make full contact with the pin) 3) Use the same small screw driver to lift up the end of the spring (Where the spring bends) UP a TAD higher (creating more tension on the spring which makes the lever get full contact to complete the circuit). That's It! 4) Give it a test before reassembly if you want.
How on earth did you get the bit into this contraption? My file is too big for the little gold rod thingy. I tried turning the inside gold rod upside down, but then it is too big. Ugh!!!
Mine was great 👍🏾 honestly you have to have better bits the drill bits try a tornado bit I use this for feet and my mani pro for full sets the bits you’re using are not good just generic bits your supposed to use long strokes not choppy short strokes mine was very strong almost too overbearing you didn’t show at all how the drill worked filing on a nail just the mechanics of the drill which why did I need to see that ?? I’m not a mechanic 👨🏿🔧 I want to see how it files on a nail not a piece of plastic
Hi, thanks for visiting my channel. I have another video specially explaining how to use it. Please view the video and if you have any further questions please do leave a comment and I will get back to you ASAP. Cheers.
@@HomBKaviani thank you so much . During Sydney’s lock down I couldn’t get my acrylics done . I’ve been buying bit by bot my nail lamp now my drill . I am really enjoying growing my own nails back to a nice length. Have a great day from Sydney Australia xox I no doubt will but a more expensive one after Christmas and I hope you and your family have a love filled Christmas and new yr xoxo
Hey y’all I just watched a video for the button above it you pressed down and hold and you’ll see the top hole expand than you enter any drill you want ♡´･ᴗ･`♡ Here’s the video if you wanna watch the whole tutorial ruclips.net/video/znbbXoqBVuM/видео.html
Can you show us properly how to put the pieces in?? You're right out of camera range when you're putting the pieces in - the most important part - and we can't see what you're doing. It is SO frustrating! This is the exact model I purchased and I can't use it. A complete waste of money!
My mother has a hardware drill set that costed her relatively cheap, and the lowest setting on it is like 200 times too fast for nail usage ( i was in a pinch and needed to remove product from my nails) this drill is for nails only. I have it and have been using it for more than 2 years. I never use the maximum speed as you dont need it for the soft material that are used on nails.... it is unfortunate that people are somehow mislead into thinking that nail drill and hardware drill are interchangable... i have had a high end nail drill and even that could not drill trough a thin seashell like a hardware one could. I found that pink drill you are showing in a pharmacy... if sellers elsewhere try to pretend that this drill is both hardware store kind and nail drill kind ... that is very unfortunate...
This product is DOODOO. My sister bought me one for Christmas, because she knew I was into wood carving, and it was hardly able to cut a popsicle stick in half. The best way I could describe trying to cut or grind somthing with this is like trying to take a toothbrush motor and make it spin a tire. Now that I have saved up money, I’m buying a legitimate rotary carver, and this monstrosity will be nowhere on my list.
How do I fix my nail drill it keeps shaking every time I turn it on and stops within 1 minute of using it I tried opening it and seeing what's going on but it still will not STOP SHAKING
Another one... im currently using it for almost 10min. Then i off it for a while. Then when i going to use again the drill, it doesn’t work. What can I do?
Hi, if you mean the place where tools or tips are connected, there is a pin on the side of the tip and had to be pressed in order to lock the tip ready to change the tools. Hope it will help. Good luck and cheers for now.
Hom Bkaviani i’m talking about the part that plugs into the wall, i don’t have a plug in like that in my wall so idk what to do, if i’m supposed to buy an adapter or something? and you stay well too :)
I love this tool! I have used it for over a year and it has never disappointed me. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR As long as you remember it is a battery tool and not intended to do continuous heavy work (I have a corded tools for that), it will give you great service for quickie jobs. I get long use out of the batteries and just watch my charge levels, and have yet to use an entire charge on one project. I would also highly recommend the keyless chuck which I also find very useful. Today I cut nine heavy wires on a piece of concrete wire mesh which is used for a garden trellis with a cut-off disk and then used a grindstone to smooth the edges. I tried first to use one of my heavy-duty 20v lithium grinders/cut-off tools and it was just too hard to control the tool on the wires and get good close edges, so I switched to the Dremel and had no problem. It was so much easier to control to get nice flush cuts.
I was just getting ready to return it because I didn’t know how to make it work, then I watched this video. Does a great job for its price 👍
SAME HERE!!!
I was about to do the same
I was about to do the same thing
me too
Who else has one can cant place the tool inside the hole ?
U gotta push super hard the sides open up
@@taystieeeb4043 it didn’t work
right it keeps falling out
@@avaloren7593 same here
@@avaloren7593 ikr
Great video! For manicures that need to be repaired, this portable machine is still needed. I bought this small manicure machine from the renhotecic brand not long ago, and I can operate it myself, and the effect is quite good. Everyone can try it.
applying pressure will stop rotation which is good safety specially when human toe nails are involved. not bad for price
NON WORKING DREMEL TOOL SOLVED:
I just now fixed the one I bought yesterday after it wouldn't turn on. Just do this, and it's easy!..
1) Unplug the dremel and remove the 4 screws to open the tool just like he did in this vid
2) Carefully rotate the speed control wheel On and Off and take note on how it operates the spring and lever. (This is where the issue is, the lever doesn't make full contact with the pin)
3) Use the same small screw driver to lift up the end of the spring (Where the spring bends) UP a TAD higher (creating more tension on the spring which makes the lever get full contact to complete the circuit). That's It!
4) Give it a test before reassembly if you want.
I will try this...thank you..
@Goosa Poosa I will see if I can get to it today
Reading the comments I can see now that this product is a REAL SCAM. I was able to use mine only once.
Mine lasted one week I was cool it’s a $14 tool so it’s bs
I really thought they ripped me off! Thank you so much, this video was absolutely useful for me
@@kutloanomphuthi1914 you're welcome.
Can use this product while is on charge. Thanks for sharing
bought it to use on eva foam, using the filing thingies on that seems to be working i just need some practice
How on earth did you get the bit into this contraption? My file is too big for the little gold rod thingy. I tried turning the inside gold rod upside down, but then it is too big. Ugh!!!
That’s what I’m trying to do if you figured out how to do it please reply and let me know how
Push the button unscrew at the same time
@@anaira.i thanksss
@@anaira.i That doesn't work unfortunately.
You just have to push the drill bit into the little metal shaft hard and it opens.
Mine was great 👍🏾 honestly you have to have better bits the drill bits try a tornado bit I use this for feet and my mani pro for full sets the bits you’re using are not good just generic bits your supposed to use long strokes not choppy short strokes mine was very strong almost too overbearing you didn’t show at all how the drill worked filing on a nail just the mechanics of the drill which why did I need to see that ?? I’m not a mechanic 👨🏿🔧 I want to see how it files on a nail not a piece of plastic
Thanks for the help really saved me from disaster 10/10 very helpful 😁
Thanks I just got mine and can’t figure out how to put the bits into the machine
Hi, thanks for visiting my channel. I have another video specially explaining how to use it. Please view the video and if you have any further questions please do leave a comment and I will get back to you ASAP. Cheers.
@@HomBKaviani thank you so much . During Sydney’s lock down I couldn’t get my acrylics done . I’ve been buying bit by bot my nail lamp now my drill . I am really enjoying growing my own nails back to a nice length. Have a great day from Sydney Australia xox I no doubt will but a more expensive one after Christmas and I hope you and your family have a love filled Christmas and new yr xoxo
I’m still confused on how to put the drill in
Hi, I've uploaded a new video to show how to use it. Thanks for your comment and cheers for now.
I figured out how to put it in.😭😭😭😩😩😩
Working Good for me. Top speed just like the Professionals. Loved the Affordable price. Thank you so much🌟🌟🌟🌟
I got one that looks the same brand but black. The drill bits won’t fit it. I got them from the same seller. Any reasons why?
I have the same problem
@@shuababdi2124 sameeee I’m so mad
Hey y’all I just watched a video for the button above it you pressed down and hold and you’ll see the top hole expand than you enter any drill you want ♡´･ᴗ･`♡
Here’s the video if you wanna watch the whole tutorial
ruclips.net/video/znbbXoqBVuM/видео.html
@@bBratzK-nOmy3 thanks
Just plugged in to charge… stopped working. Try to put on drills- no way… motor doesn’t work
Great and helpful video thank you
Thank you my life saver ❤️🤝🏼🙏
Do you know the size for the chuck in you video in at 6.52
Can you show us properly how to put the pieces in?? You're right out of camera range when you're putting the pieces in - the most important part - and we can't see what you're doing. It is SO frustrating! This is the exact model I purchased and I can't use it. A complete waste of money!
How do i untwist the screw. Its not screwing off
You dont unscrew... Try pulling it out. That's what works easily for me
@@TateVeera hey i k ow your comment was a while ago but i tried pulling mine and it’s not coming out?
Ok I figured it out you push down the shiny button and at the same time start unscrewing x
Nem tudom elinditani mivel nem toltofik fel. Ilyenkor mit kell csinalni??????
Everything he say is true
where u live bc it was $17 for me
@@audreyquinn5629 st kitts nevis
ruclips.net/channel/UCTfPadkP2x2HPxHvVN-EdLQ
I wasted my money. Mine came broken It wouldn’t even turn on. I had to order a different brand from Amazon which turned out to be pretty good.
mine too. which one did you order?
I ordered the one in this video
is the charger a 2.5mm jack?
Mine lost speed and strenght too soon. 😪
So I must have dat adapter or is it a machine dat white one
Worst drill ever. Bought one last week and the bits kept falling out. Couldn't use it once to file. Just threw it away
Thank you for being so detailed in your description.
Thanks for your kind comment. Take care and stay well.
@@HomBKaviani
In this time of crisis and uncertainty same to you and yours
I do I get the stick out it’s not coming out ??
This video helps a lot
Will you get on with it I can read fs
Most definitely. Thanks and stay well, cheerio.
🤣🤣🤣🤣
ruclips.net/channel/UCTfPadkP2x2HPxHvVN-EdLQ
I LOVE YOU THANKS!!!
My mother has a hardware drill set that costed her relatively cheap, and the lowest setting on it is like 200 times too fast for nail usage ( i was in a pinch and needed to remove product from my nails) this drill is for nails only. I have it and have been using it for more than 2 years. I never use the maximum speed as you dont need it for the soft material that are used on nails.... it is unfortunate that people are somehow mislead into thinking that nail drill and hardware drill are interchangable... i have had a high end nail drill and even that could not drill trough a thin seashell like a hardware one could. I found that pink drill you are showing in a pharmacy... if sellers elsewhere try to pretend that this drill is both hardware store kind and nail drill kind ... that is very unfortunate...
I bought this year's ago. And want to remove my "dip" would this work? If so what tip would you use? Help, plz
Agradecería mucho que pusiera subtítulos ☺
Para ir directo al grano es bueno pero no super recomendable y más si lo vas a usar para trabajos muy pesados
This product is DOODOO. My sister bought me one for Christmas, because she knew I was into wood carving, and it was hardly able to cut a popsicle stick in half. The best way I could describe trying to cut or grind somthing with this is like trying to take a toothbrush motor and make it spin a tire. Now that I have saved up money, I’m buying a legitimate rotary carver, and this monstrosity will be nowhere on my list.
jackgyver maybe it’s cause these are for nails not wood
Peachgames it said on the box “for polishing, grinding” and whatever else, did it not?
Its for nails lol its a drill made especially for nails and other things for nails
It's for nails not wood craving 😭😭
Bole lah dr takde lansung. Jgn guna utk heavy duty. Guna yg simple2 case.
hello sir can you pls help i need a link to buy 3.2 mm collet for this device.i couldn't seem to find one with right size.
Wonderful in deepth explanation. Thank u n God bless u
Thank you
@@sindisiwemncwabe9081 you're welcome.
How do I fix my nail drill it keeps shaking every time I turn it on and stops within 1 minute of using it I tried opening it and seeing what's going on but it still will not STOP SHAKING
Same
What did you do ?
I had that problem and it was because I dropped it so I just went ahead and got a new one.
Where can I find it in PR ?
I thought he was going to use it on a actually acrylic nail
Thenku for this only God knows how I was doing it
It’s good but it gets jammed very easily the bit where you put the nail filing bits in
@@antarn9406 yes
My cap won’t come off!
Samee
Push the button unscrew at the same time
Mine worked for a day
Thanks allot Sir.
I hate this machine so much, I don’t understand why it’s so difficult to switch each file tip, I had put one on and it’s stuck forever 😡
Mine stops working 😢
same.😕
Mine too, I bought it yesterday 😢
Mine 😭
Mine won’t turn on
Mine stops working all the time after few seconds.. its trash
If you didn't use it on an acrylic nail how can you determine if it will work or not
My bit? Is not staying its falling
Mi torno no funciona y solo lo usé una vez
COMPREI UMA. CHEGOU ONTONTE NÃO USEI AINDA
Lo quisiera escuchar en español
Can you change the chuck with the keyless chuck?
No, I'm afraid that's not possible.
سبحان الله وبحمده سبحان الله العظيم
Sbhan allh wa be hamdeh sbhan allh aladem
I have that one. But it doesn’t have adaptor. Just a usb wire only. What can I use as adaptor?
Hi, thanks for your question and interest in my channel. Any phone charger or power banks can be used to run the item. Good luck and cheers for now.
Another one... im currently using it for almost 10min. Then i off it for a while. Then when i going to use again the drill, it doesn’t work. What can I do?
ruclips.net/channel/UCTfPadkP2x2HPxHvVN-EdLQ
How did you unscrew the screws?
Hi, if you mean the place where tools or tips are connected, there is a pin on the side of the tip and had to be pressed in order to lock the tip ready to change the tools. Hope it will help. Good luck and cheers for now.
Hom Bkaviani I mean what tools did you use to open the nail drill because I received my drill and it doesn’t work and I wanted to try to fix it
@@rqvnnn2860 round about 8 minute in video I explained how.
Hom Bkaviani you cut out the part on how you took the nail screws out to look inside the drill. What did you used to open the drill to look inside
@@rqvnnn2860 you need a small philips or cross screwdriver to take out four screws.
It worked great for me;-)
Do the different bits all fit well because mine doesn’t fit at all
@@emmasosa4611 same
The bits on mine won't stay in. Any suggestions? They just keep falling out.
how do you plug it in i have this same one i’m pretty sure but i’m not sure how to plug it in
Hi, just from the bottom there is a female connection that's where to connect it to the power adapter. Good luck and cheers for now and stay well.
Hom Bkaviani i’m talking about the part that plugs into the wall, i don’t have a plug in like that in my wall so idk what to do, if i’m supposed to buy an adapter or something? and you stay well too :)
@@kadyn8631 it needs a 9v wall adapter with 3.5mm centre positive jack. Cheerio.
✋️
I just realise that i didnt get an adapter
I just got mine and it doesn't work, what a waste 😑
Same
Did you fix it ?
@@josselyn7421 nope
@@sistahgirlangel same
The drill bits in the kit don’t even fit inside ?? Completely unusable
You sound like a Persian living in England. Since you said "pounds"
I didn’t have a clue how to do this I’ve just sat half hour trying to do it left it with my boyfriend for 1 minutes and he’s done it😂😂😂😂🥲
احسبه بنت🤣🤣🤍
Idioma español
The demo was too slow
Newsty 1:29 1:31
Dude is this a fuckin vibrator i didn't get it
cheap crap. Do not buy it. better invest some money and buy quality rotary tool from good companies. This one has a very weak motor.
too much talk blah blah blah
ricky vargas lol
I love this tool! I have used it for over a year and it has never disappointed me. ruclips.net/user/postUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR As long as you remember it is a battery tool and not intended to do continuous heavy work (I have a corded tools for that), it will give you great service for quickie jobs. I get long use out of the batteries and just watch my charge levels, and have yet to use an entire charge on one project. I would also highly recommend the keyless chuck which I also find very useful. Today I cut nine heavy wires on a piece of concrete wire mesh which is used for a garden trellis with a cut-off disk and then used a grindstone to smooth the edges. I tried first to use one of my heavy-duty 20v lithium grinders/cut-off tools and it was just too hard to control the tool on the wires and get good close edges, so I switched to the Dremel and had no problem. It was so much easier to control to get nice flush cuts.