Oz track suck. Took my car to Oz track for a full rebuild and was totally disappointed. Left my car Leaking oil from left Rocker cover that was not put on properly leaking coolant from a loose hose poor dyno results.Ended up having to take it to Sam's performance 3 months later to do the job right. And ended up stroking to a 383 sending heads to higgens and using all forged parts. Don't throw your hard earned money away and go to someone good the first time. Sam's is an LS expert. Can't be happier. 100% honest story.
Zac Morrison I can't find any evidence to support your theory. Its a GMpowertrain project that started in 91 and first saw light of day in the 97 vette.. Several years before it made it into a commondore. It's true Holden continued to develop it independantly of GM/Chev.. But that is not an Aussie engine.
Hi GuysLove your RUclips clips. Professional. Is the tune done on road, and just wondering how Andrew gets a air fuel ratio right as on a dyno a sensor is placed in the rear tailpipe. Dose the commodore computer give a ratio reading? Saying that I agree a tune can be done on the road as I have done a simple tune on a 1977 Charger with a Haltech computer, a 5v sensor and a air fuel ratio gauge in the car. Brother drove and with a laptop on my lap got the mixtures right which we did it with a 2 hour drive - had to take a Aspro after. Whose licence is at risk !!!Keep up the good work and keep them coming.
Why has no one designed a twin pipe system that scoops air from the bottom near the road , you have cooler air closer to the road ! I don’t get this OTR stuff surely you get hot air up the top
dosnt mafless tuneing loose 15 hp. as u remove the ability for the ecu to measure the amount of air so it hunts.arn u better to add the maf sensor to the throttler body and mount the otr directly to it............... are u losing or gaining anything also ant dyno sheet to compare ..... to maf or not to maf
The only way to do this is get a mafless tune , replace that air intake and put in a full force 3” exhaust with extractors I would dip extractors in ceramic the cost I worked out how to do this is very high it will cost you $2500-3000 to get hypothetically 300rkw !! So it’s not as simple as this video makes out and it’s not really worth butchering your car to be able to be the fastest on the road speed which you can not really use anyway , I have a nice very original 5.7 litre V8 VY calais , been really well looked after and is immaculately original black in colour and looks classy as it is , any mods I do will be a waste of money and devalue the car
Oz track suck. Took my car to Oz track for a full rebuild and was totally disappointed. Left my car Leaking oil from left Rocker cover that was not put on properly leaking coolant from a loose hose poor dyno results.Ended up having to take it to Sam's performance 3 months later to do the job right. And ended up stroking to a 383 sending heads to higgens and using all forged parts. Don't throw your hard earned money away and go to someone good the first time. Sam's is an LS expert. Can't be happier. 100% honest story.
Good to see you guys showing DIY mods on an Ls1, keep up the good work.
at least their working on aussie cars unlike fucking MCM which are disgrace to the aus tuner scene
+ut2k4wikichici Yeah, cause nothin says Straya like a good ole Chevy V8 right...
+M3rVsT4H TFW and LS1 was actually designed in Australia
Zac Morrison I can't find any evidence to support your theory. Its a GMpowertrain project that started in 91 and first saw light of day in the 97 vette.. Several years before it made it into a commondore. It's true Holden continued to develop it independantly of GM/Chev.. But that is not an Aussie engine.
The hood closes over the top of the intake (with both stock and the new over-the-radiator intakes), doesn't that restrict airflow a fair bit?
Fucking great lads should've kept it up you would've had a show somewhere in no time
Hi where are you guys located at ty
What was the power gain (or loss)?
Heads/Cam/Long Tubes if you're looking for power.
the music was too high could hardly hear the guys talking
thats what I was going to say .wanted to here u guys
What brand OTR is used in this video?
Can't hear over the Accordion music. You'll need SBS sub titles!!!
What engine is that in your VZ
heads cam gears there is no secret
Hi GuysLove your RUclips clips. Professional. Is the tune done on road, and just wondering how Andrew gets a air fuel ratio right as on a dyno a sensor is placed in the rear tailpipe. Dose the commodore computer give a ratio reading? Saying that I agree a tune can be done on the road as I have done a simple tune on a 1977 Charger with a Haltech computer, a 5v sensor and a air fuel ratio gauge in the car. Brother drove and with a laptop on my lap got the mixtures right which we did it with a 2 hour drive - had to take a Aspro after. Whose licence is at risk !!!Keep up the good work and keep them coming.
Do you do anything for the Kia Optima 1.7 diesel or Hyundai 130 with the same engine?
what would mafless do? would this use more fuel due to no sensor of fuel air mix ratio? or is it better due to the cai?
Justin alot of people saying it gives better fuel economy
Why has no one designed a twin pipe system that scoops air from the bottom near the road , you have cooler air closer to the road ! I don’t get this OTR stuff surely you get hot air up the top
dosnt mafless tuneing loose 15 hp. as u remove the ability for the ecu to measure the amount of air so it hunts.arn u better to add the maf sensor to the throttler body and mount the otr directly to it............... are u losing or gaining anything also ant dyno sheet to compare ..... to maf or not to maf
it auto tunes the ecu and learns right
Like a non-entertaining MCM
Comparing us to MCM might be insulting ... To them
the one guy even sounds just like marty lmao
Boys ur content is sick, keep it coming brahs !!
that intro song was sick......whos the artist?
Top of the range content Thanx.
That sensors ment to be in the otr
Nice one guys good edit.!!
Nice video, got plans for more?
awesome video guys!! keep it up, I always look forward to seeing a new video. Its awesome yous work on vz commys because I have one myself :)
BRO TURN THE MUSIC DOWN I CAN BARLEY HEAR YA.
Nothing wrong with hello kitty!
Go to Gm motorsports way better and get a ramjet
"electric screwdriver" aka power drill
"Cordless screwdriver" 👍
Step 1 ) Try to replicate a successful youtube show except with less talent.
Step 2) ????????
Step 3) Profit.
MMmmmm.
Give em a break they go alright. Gots to start somewhere . Good info got another subscriber :)
Bummer can't hear anything. Dam music!
Year good stuff
The only way to do this is get a mafless tune , replace that air intake and put in a full force 3” exhaust with extractors I would dip extractors in ceramic the cost I worked out how to do this is very high it will cost you $2500-3000 to get hypothetically 300rkw !! So it’s not as simple as this video makes out and it’s not really worth butchering your car to be able to be the fastest on the road speed which you can not really use anyway , I have a nice very original 5.7 litre V8 VY calais , been really well looked after and is immaculately original black in colour and looks classy as it is , any mods I do will be a waste of money and devalue the car
You wont get 300 RWKW without a camshaft you r a dreamer mate and people mod their car cause they want to a stock 5,7 is shit.
150 view :D love this show guys keep going :D
Cut the music out when u guys are teaching can't her watch u guys are teaching
why play loud stupid music when you are talking but in the in fill of nothing happening you dont have music??
Couldn’t hear a word you said from the annoying music!
mighty car mods copy
fucking ps... trashing my immediate dreams
can't hear a Damn thing your saying man
ayyyyyyyyy
you guys need to do a bit of learning hey
MCM tryna be
Fuck off Blood 4 Geek
Terrible audio. If you want people to subscribe to your stuff, get some professional help with production.
Clown shop.
Good for circus laugh
worst tuners in sydney
as soon as you said cut with tin snips i stopped watching