How to Start Making Vinyl Decals (Basic Guide)
HTML-код
- Опубликовано: 25 июл 2024
- Links for all materials and tool mentioned in the video:
Fiskar Blade: amzn.to/3h0Tc0I
Tweezers: amzn.to/2ZafJ56
Transfer Tape: amzn.to/3jPzIh9
Vinyl: amzn.to/3bwlgrJ
Paper Cutter: amzn.to/3lSFsbS
Guillotine Paper Cutter: amzn.to/3bu11Lb
Silhouette Studio Software Legacy Download:
Version 3.8.2
www.silhouetteamerica.com/sof...
Songs:
Tiny Waves - Asseri - Start Up
/ asseri-start-up
Aika x Trifect x Tenkitsune - Triple Sweet
/ aika-x-trifect-x-tenki...
Aice - Ocean
/ aice-ocean
Been thinking about making my own custom vinyl stickers but always wondered how it worked! Thanks for the information in this video! Very well presented!!
You can also put a square /box around the design and cut that out too. So much easier when weeding the unneeded parts ;)
You saved me! I’ve been looking for a video with clear introductions for hours. Thank you
Glad I can provide some help!
Only Jesus saves and it by trust and faith in Hum ALONE no other lower case god ar anyone like buddha who was just a man, just saying
Me too sis. this was awesome.
There is actually a lot more brands than 2. Vinyl cutters were around before cricut and all these non commercial units, I prefer brother as they have some nice units and dont require a cloud subscription
how can you make motorcycle decals!?
@@randomguy7806 same way you make most vinyl decals
@@randomguy7806 are you talking printed decals? A lot of local vinyl shops can make printed vinyl decals. There is printable vinyl made by oracal, I haven't used it yet but I am going to get some and try it. I have a buddy at a local body shop who has someone who makes pretty good replica decals
cricut does require a cloud subscription either. they talked about it then backed down from it, i dont have a cloud subscription for mine
They're literally plotters
Just made my life simpler with this! Hope to see more from you!
Thanks for the simple walkthrough! Extremely helpful.
thank you so much for this simple tutorial i cant wait to start making my own stuff
Lovely tutorial. Not over-wrought. Not too wordy. Measured tone. A+
Thanks, appreciate the positive feedback!
Super easy listening aye! Chill as chur!
Dude you absolutely rock! Thank you for this video, you just gained a subscriber 👏
My eventually get a different cutting machine but I looove the scan function!!! Its awesome. Thank you for this! :)
Nicely done mate, thank you. Simple but detailed enough
Awesome video! Just bought a cricut joy and am excited to make some anime decals to personalize my room
Thanks for sharing. Appreciate it. I learned something I didn’t know prior watching this video. 👍
Great tutorial thank you for taking time to make this video to us very informative
What a great tutorial! I have watched other videos on how to make vinyl stickers using a cricut & they go so fast you can't see how it's really done. Also the annoying background music when they speed up the video 🙄😖. I don't currently own any machine for this purpose, but I'm researching & that's how I came across your video. You are awesome for showing EVERYTHING step by step like you did. You truly make it look so easy. I'm still nervous to try it out, but I now have this video I can rewatch to remind me how it's done! Again you are awesome & thanks for this great video. You rock! 👍👏
Loved the video man it was awsome
An actual straight forward video, big ups
That was a great video, thanks for the tutorial and info!!
Love learning new tricks. Thanks for sharing 🥰🥰🥰
I really want to learn to do decals and been browsing on youtube what tools i need to start up and After watching 13 videos. Your video is the only one i like with all the information and tools I need.
Thank you and once I get all my stuff I will go back and watch more of your videos.
Salamat!!
G9
thank you for the great video, very clear and understandable presentation, subscribed.
Really well explained and easy to understand video, thank you!
Nice tips.Extremely helpful.Thanks
Smart video... Simple and to the point without excess yackity yack...
Thanks
Easy fast and efficient thank you.
Good job well done! 👍🏼 thanks for sharing 💐
super simple and easy to follow !
Very simple video!! I appreciate your help
Extremely helpful, now I really want to do some decals.
most helpful video ever. THANK YOU!!
Super helpful, now I'm confident.
Thank you for the good info, gained a subscriber.
This video was so amazing and helpful I'm still learning and u made it look so easy
Glad I can make it easy (:
Very informational. Good job. Thanks
Thank you very much for this tutorial!
That’s pretty neat. Very helpful as well.
This was very helpful and cool
Thank you! I’ve been looking for a video that shows step-by-step like yours 🙌🏾
This video is super helpful. Thanks dude
Omg this looked so easy and cool!!!!
like your vids mtey cheers loads of decent info, will be folowing you mate have my equipment coming next week, cant wait! keep upthe good work lad..
goated Howto for sure, tired of seeing the generic mom blah blah blah, this Howto was def simple and easy to understand while also being super detailed! really helped me out with my first time using my machine. coming back to this video for some more reference if i forget what to do !
thank you!!!
Great video thanks
Sickass foo thanks 🙏
Hella good video. Thanks man. Want to do a run of tribute decals for a fallen driver and yeah this looks perfect
Just watched the video. Definitely subbed
I have a scan and cut 125 and it's amazing!!!!.
You make it look easy, I've been trying to decide between a Cricut and a silhouette, thank you!
Unless they changed their mind last I checked, Cricut is going to start with some subscription model that will practically make it a requirement to use their cutter.
Wife prefers Silhouette. Something about how it cuts letters if I recall correctly. Says she can always tell if the letters were done with a Cricut or not.
Gave my Mum a Cricut Joy as a Gift. After testing it for myself, as I was looking for a bigger Plotter for myself to cut Vinyl, I will definitely go with Silhouette. Cricut is fine, if you‘re ok with the monthly subscription. Otherwise you are either limited in ease of use and designs, or you have to use workarounds. Or 3rd party Apps (which are often subscription based).
@@OneSingleBreath wait u gotta have a subscription with cricut ?
@@blazingumbreon4598 Well,… you don’t have to. But if you want to use all fonts, designs and so on within the App, you have to go with a subscription. That’s what I think, after testing my mothers Cricut Joy. I haven’t tested the desktop software, I have to admit. But let alone the fact, that you can’t use the fonts already installed on your phone os is annoying.
@@OneSingleBreath So is the silhouette a better choice? For stickers and vinyl ?
Very good tutorial thanks🙏🏿
Very good explanation 💯
Thaaaaaaaank -you! Great tutorial you make sense subscribed!
Great video. This is pretty much how you do it on a cricut as well, minus a few steps.
An older 1st generation Cricut is a good place to start, too. Small size but a great learning experience.
great video, thanks for sharing.
Cool video 👍
Good video man!
Great video, thanks
Very well communicated. Thanks!
Ayyyyyy yesss thank you very much ❤️😖🙏🙏
i finally got it now how to do those kinds of stickers… thank you very much!!
Loved it
Scan n cut is fantastic for vinyl.
Good job
love vinyl decals i make a living from it and once you get it easy to make
So helpful
Thank you! Great video! Any videos for how to make your own designs?
Great instructional video. Wish you would have continued by showing the transfer of the decal to the end product. Do you soak it in water, etc. Thanks again.
No need, you can apply directly to the surface
Thanks dude
So long story short I came across a store that makes decals and I thought they were really cool and that I wanted to make em so I came to RUclips and selected this vid I looked at who made it and your the same person I watched on TikTok lol
Sounds more like short story long to me lol.
"Hey, this is the guy I saw on Tik Tok!" would cover it.
Best video for biginners like me
Thank you
Love to make one
thx man
Great Job, One Like From Me
Impressive
Nice tutorial my man i really want to start a business now xd
Keep up the great content neon ❤
Thank you (:
This is the wrong way to do it if you want to do a business
@@djmason9 why
Thanks bro
You think you could show a quick tutorial on how you do the full color ones you guys make nowadays?
Coming up!
Waiting
@@BLUEJAY720 same here lol
Great tutorial! I am interested in getting into this for some hobby projects like making decals for models such as rockets, cars, etc. One thing I am interested in is multi-colored decals, i.e., can I produce a color pattern like a flame with yellow, red, etc and then print on vinyl and then cut it out...I suspect the answer is yes, but don't know that at this time...again...thanks for the video...starting to understand the process...
I am not an expert, my understanding is for your question (detailed red & Yellow fire) you would need a vinal printer which can get expensive depending on how big a decal your want to make. Or alternatively if it is a simple design with few colors (like a 2 part flame design), you could just get a cutter and split the design to cut the 2 parts out of red and yellow vinal and just line them up when you apply stickers to the surface you want.
You'd need a good printer and sticker paper then cut it with a plotter. There are machines that do it all in one but they're spendy have a hunt on youtube people have put out specific videos like that
yooo you got shinobu on there i love you loll
GOOD ONE. .MORE TIPS PLS.
this is awesome Can you please do one for writing fonts ???
Crazy how I get the same quality cuts and final product, but I'm using a GOODWILL find silhouette relic and Studio 4.4 lmao 🤣
Whar model help
Good job bro👍👍
but I'm still curious about how you can redraw an anime character so you can make a vinyl sticker on the Instagram? please make the tutorial.
I'm thinking of the decals of Garven Dreis/Red Leader's helmet as that Moonsault hasn't got the red shapes correct on each side.
Could you show how you make the anime character decals?
Nice work. I couldn't afford the vinyl cutting machine though.
Nice one I really appreciate 😍
I want to start using system. I'm using scissors ✂️ to cut. Please can you help me
I see they come in multiple sizes, anyone recommend a size to make 100x1000mm vinyls
I am your 400 subscriber congrats 🎉
Btw I would like to know how to make stickers
Any tips on making anime decals for airsoft grips?
Very good. If you ever need work, let me know. I always have projects going......lol
Nice video man keep it up!!! I also have a channel where I teach how to make vinyl decals and how to make money selling them. You have such a nice set up.
POGGGG
Hello, can this machine be used to make large decals to cover the side of a Motorhome, such as a stripe. Thanks
does anyone know if the silhouette portrait 3 is good for cutting vinyls
So you would be able to make stencil as well with this I'm guessing right?
Do you guys plan on making any more advanced videos regarding making stickers?? There's a ton of questions i'm drawing blanks on as I get started trying to learn
Hopefully more in the next year
neon god~
Thank you for this video I want to ask you some questions. I need to make special word decals for nails would it work?? How much does everything thing cost to produce these decals