BMW N54 E92 335i Walnut Blasting: How Much Faster?
HTML-код
- Опубликовано: 10 апр 2020
- BMW N54 E92 335i Walnut Blasting: How Much Faster?
Before activating the port injection we want to see if the Walnut Blast / Valve cleaning has had an effect on the cars 0-100 time. Unfortunately it wasn't trouble free, but the car did manage its best ever time, even though thats not the best surface we have timed it on.
#bmw #walnutblast #valveclean
Want some #teamn54 merch? Teespring Store - bit.ly/3fh0bT5
UPDATE AUGUST 2020
The car is tuned currently by JSRTuning and its performing so well. Please go and give JSRTuning a sub on youtube. Its mainly n54 racing vids.... i mean what more could you ask for. bit.ly/3dCM60F If you do contact JSR let him know you heard about him on Zeroto60.
Check out the full playlist on this car - bit.ly/2xc0EoA
Budget Build Parts List So Far
Turbos through eBay
RHD UK/Australia - ebay.to/2PKAgId
LHD USA/Europe - ebay.to/3hN9awQ
Turbos through Amazon
17T RHD / LHD Listing amzn.to/3efnoDQ
19T LHD amzn.to/2VZuV3i. (these are slightly bigger then mine, i wish i got these)
19T RHD amzn.to/2ZXg0Ib (these are slightly bigger then mine, i wish i got these)
2 Inch Inlets - ebay.to/33Qi9ZJ
Gecko Coilovers - ebay.to/3jrUIeI
Rocker Cover - amzn.to/33caOBd , ebay.to/2TIRQyZ
-10an Line & Fittings Kit - ebay.to/31GFsCB
Trans Cooler - ebay.to/3gOkbxy
Elder Coils - ebay.to/38Izq5R
Billet PCV Valve - ebay.to/3aS7NJg
China Spec Walbro 460 F90000267 (use at own risk, but that is whats in this car currently - update the second pump in the stage 3 setup, failed straight away) - amzn.to/33fqYZ4
LCI Tail Lights - ebay.to/34KQc3L
12mm Bolt On Spacers - ebay.to/2XRRKah
E92 Custom Floor Mats - ebay.to/2CkgEaX
Smoked Side Flashers - ebay.to/2XPyVEk
Clear Side Flashes - ebay.to/2PMkMUi
My port injection was secondhand. But i may switch to a PI manifold shortly.
#17Thybrids #teamN54 #n54turbo
Follow us for more BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com 
Авто/Мото
![Turning a $5000 BMW 335i into a $50,000 BMW! [Part 2]](http://i.ytimg.com/vi/IAengFPl0pg/mqdefault.jpg)
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Loving the daily content! Keep up the great videos.
Hey man, nice video
So you have the 17T turbos installed or not yet? What are your comming plans?
For the transmission issue, i think since you did some installations it could have reset the TCU and adaptations are lost thats whay it is getting better as you drive.
I did the xhp v3 map update and can confirm it is a big step up from v1.5. I did have some issues with doing the load but several emails back and forth to xhp, and an app update later and all good. Make sure you update to the latest app version before attempting. A bit frustrating but the service from xhp is exceptional and you also get all the map stages now even if you had only bought one in the past. Good luck, interested to see what you think.
I did load xHP v3 up yesterday and it initially felt much smoother in D mode. S seemed a lot more sporty. I haven't done any flat out shifts yet, but that is todays plan. About to go and see if it makes any difference to the 0-100 or 60-120s.
Hey! I don’t know if you have looked into Sutphin Tuning, but he creates custom transmission tunes using the xhp software for the flashing process. He completely redid the tune from the ground up and was able to unlock MUCH better shifts that also don’t lose boost between shift like you are losing right now. Might be worth looking into, he has some RUclips videos on his channel, 335i’s and 335d’s. He specializes in the zf6 speed
I'm waiting with anticipation guys, ill be sure to make it down that way soon 👌👍
About time you popped in to say hello
How much was it for the walnut blast ?
Those are impressive times with “2 fatties” in the car😂👍🏻. As for the charge pipe issue, you can try trimming the coupler a bit but than again I can’t really see your set up so it’s just an idea. Good luck!💪🏼💨
I ended up adjusting all 4 clamps between the intercool and charge pipe and she's sitting perfect now.
Zero To 60 also, I’d recommend replacing your vanos solenoids if you haven’t already. I definitely felt a power increase after changing mine at 100 k miles
What software did you use to record the 0 to 60mph times
This was recorded using a vbox sport and app. However will probably be switching to a draggy soon. Just filmed a vid comparing them on the weekend actually. ruclips.net/video/iaPqas6MQM0/видео.html
Wgdc seems to be realy high on last pulls, probably chargepipe was leaking already before it popped off.
Well spotted. I had that on the JB4 guage for that exact reason. To see if anything was leaking around the manifold. I wasn't expecting and issue with that charge pipe tho.... ahhh well she is all sorted now.... i hope.
should i get a xdrive bmw 335i e90 sedan or should i go with rwd 335i e90 sedan ??? and what transmission should i go with? auto or manual ? thank you very much guys
can u answer my question please
I cant wait to go WOT for more than 2 seconds with out a CEL in my N55, its been a year and 10 fixes but I'm hopeful! Any day now!
What troubles have you been through with the n55?
I been like that a year, plus hated the car. I change some vacuum lines by the wastage and the boost controller are what ever it's called..loving my car again
what oil tmp did the car reach ? with this mikrofilterhousing? zyl 5 and 6 is covered with this plastic
Peak on the day was about 110-115c from memory.
@@ZeroTo60Tube with or without thermostat mod?
@@LuxusLeina no mods to thermostat.
What was causing those crazy shifts mine does the same exact thing!
I think its because the battery went flat while it was sitting for those 10 days. If you watch the compression test video, you can see it's starting to turn over slowly. Well anyway in turn of it going flat it was like the gear box had reset itself. I hadn't driven it in sports mode ( i was in manual mode the night before) until we started the timed runs. After driving it in sports mode for about 20 mins it was back to normal.
I just did a walnut blast on my n54 e92 and experienced the same thing. Car sat for over a week with battery unplugged. Not sure if that's the culprit, please keep us posted. I also read a weak alternator can do some weird things if it isn't generating enough power.
Did u reset adaptations?
Most likely although it was years ago. I have done many adaption resets over the years, never any issues arise from it.
Are you over boosting? Your tune gives 18psi ?
No. From memory I think boost was 19.5psi back when this was done. The car was on original turbos with warm wastegates.
.1 sec faster? Was the intake valve cleaning worth it?
Honestly this video was a 3 N54s ago, 3 different turbo setups on 3 different cars. Over 1000 0-100 runs countless 1/4 mile races and probably more time in an N54 than nearly anyone else in the world. Is valve cleaning worth it. I still cant say for sure. But you should do. One the engine i pulled down the build up is crazy. Even after walnut blasting, the back of the valves are filthy.
Your boost is all over the place and pretty high if you don't have any ethanol in the mix
Its running an e55 mix in this video. My wastegates rattle like none tomorrow. She struggles to hold the 19psi in the lower gears. Buts its fine in 3rd or 4th.
M2 Lunch，quickest way to get 0-100kph in 6AT 335.
Xhp flash it
Hopefully you cleared adaptations after blasting
Never clear adaptations
BillyTheSKID ^theres some extremely terrible advice
@@typedrew I don't claim to be an expert but xhp are, just read this m.facebook.com/xhpflashtool/posts/adaptions-the-most-misunderstood-part-of-transmission-controlsince-the-launch-of/1923761651273188/
You guys are talking about different adaptations. xHP is the trans adaptations, type-dRew will be engine related adaptations, like o2 sensors, throttle body etc. xHP are right that in some cases resetting adaptations will make the car not useable, but the reality is, if you reset trans adaptations and the car can not relearn (when you follow the correct procedure) the trans has significant hardware problems anyway and you may as well replace it.
Need a dyno video
BMW 335i 17T Dyno Numbers
ruclips.net/video/tTiCLs0UMqg/видео.html
Reset your adaptions in the DME and go again sometimes if conditions change within the engine the car can do weird things like that sometimes
Thanks for the info. It has come good. Just loaded the latest xHP stage 3 map. The transmission feels better than every before.
@@ZeroTo60Tube that's great to hear guys, I've got early 2007 car with older TCU unfortunately. Hoping to get v3 map update 👍
I've only done about 50 klms so far. But with in 2 klms of driving the gearbox was shifting better than it ever has before. I haven't don't any full power shifts yet, but it feel much better than it did before.
@Zero to 60 that's awesome news I thought that was the case just because now that your engine is running more efficiently the DME and TCU wasnt use to it and has had to relearn its self I new it was nothing major hence the early comment, I'm not able to drive my 335i yet with the new v3.0 map, can you do a review on the new v3.0 update?
@@nathanielrobinson3041 ruclips.net/video/QeRZ4RdZNRs/видео.html just in case you havent seen it yet :P
Do you already have the 17t turbos installed on the car or is that something that's incoming. ???
I can answer this, turbos are not on yet. That is all to come and I am looking forward to that as well
Dbn is on the money. If you watch turbo announcement vid, you would have seen all the supporting parts i needed to have fitted before doing the turbos. Once i know i don't have any issues with the supporting mods, turbos will be going on. I have seen so many people bolt everything on at once and then spend months chasing issues. A lot of my stuff is cheap or even worse second hand, so i need to make it's all working correctly one by one. There are so many cases where people are chasing missfires for what seems like an eternity, i'm just trying to avoid that and have some confidence that i can wind it up as soon as the turbos are on.
@@ZeroTo60Tube That makes a lot of sense!
Fairplay. Doesnt sound to different to the direction iam taking. Every thing has been slowed up for the time being due to this lockdown. Only difference is I'll be running a devils down port meth kit so slightly different. Have you got to the bottom of your gearbox issues the other day? I've had the same happen on my 335i and I was looking at changing the gearbox solinoids. Thanks for the reply
So will the port injection stop the carbon build up now?
Yes, it does. Now it will have fuel passing through the intakes and over the valves. Should keep them clean like a normal non direct injection engine now.
You have changed the inlet runner length longer runner equals more Tourque
I did wonder if that would have an impact.
Obiviosuly the cleaning of the inlet valve area would help but definitely an improvement in Tourque from length increases on inlet the vl n/a manifold flows better than the turbo shorter length manifold that’s a good example and yes I would check for vaccumm boost leaks good old lpg while cars running just crack a bbq bottle open alittle and flow around the inlet manifold with a length of hose works wonders
Macht Schnell are you sure have you put the same size pipe different lengths on a flow bench?
6:33 for the love of God stop using normal clamps like that always always always always on anything boosted always use compression clamps. They’re the best. I’ve had the same issue with my 335 as soon as I put compression clamps on, let me tell you it was night and dayon turbo almost any kind of compression clamps are your best friend?
Did you ever figure out what exactly was causing the !@#%$ shifting behavior?
I would say that the ECU needed to adapt again after the walnut blast.
Launch in second gear.
You will get much better times!
Is there anyone who tried this?
Is the 2nd gear better than the 1st?
@@oerfi89 Yeah it is. But just be careful though and ease into it. Because with dtc fully off you'll fishtail bad. My backend had a close call with an STI launching in 2nd.
@@teangawarumatetaka6125 which rpm did you launch?
@@oerfi89 just floored it lol
@@teangawarumatetaka6125 ou no if you just floor it you lose important "seconds". You've to make the engine ready to race. I can say that my launches about 1700-1900 rpms are the fastest.
This is why i asked you at which rpm...
Black headliner 🤨 you lucky bastards
Get a Rod Sutphin trans tune on both cars and watch those times drop. www.sutphintuning.com
Get rid of those tbolt clamps and get some quality worm gear clamps.