Greatly Appreciated! I'm working on my son's go kart and just as you said - failed to put the plastic piece back on. I was following a video from a different channel which did not mention reinstalling the black plastic piece. Thanks again!
Mine didn't either, got a gasket kit from omb when I removed the governer. It's got two cardboard/plastic gasket and two metal ones, I'm just not sure if the plastic one goes on first or the metal one.. and that's for the backside and the front side
I have no idea what i did wrong with mine. At first when i'd go to start my engine it would only run with the choke on and even then it would only stay running for about 10 seconds at a time idling all rough like. Everybody told me it's either the gaskets or carb needs a cleaning. So i disassembled the carb gave the inside a good cleaning put back together and made sure all gaskets were in proper order got everything tightened down and went to start it but now it won't start at all. Not even with choke on. Does that white plastic piece inside the carb bowl that holds the needle need to be facing a certain direction or does it not matter as long as the needle is going into the brass hole ? I'm wondering if i reassembled that wrong now ?
Hey I’ve taken those black rods out but I want stock carb back so does the side with more treading go into the block or the side with left lmk ASAP PLEASE
My man! Just what I was looking for.
Good to see you doing vids again
Necessary video? Is it good foundation necessary? Absolutely yes. Glad you're back, keep them coming we all need counsel in one regard or another
Greatly Appreciated! I'm working on my son's go kart and just as you said - failed to put the plastic piece back on. I was following a video from a different channel which did not mention reinstalling the black plastic piece. Thanks again!
Excellent vid on proper order of assembly thanks so much!
You helped me out thanks man
Thanks for the lesson, Eric.
Thank you sir, greatly appreciated
Thank you!
Wish it would have been simple stock carb but a year later thankyou
My engine didn't come with plastic spacer
Mine didn't either, got a gasket kit from omb when I removed the governer. It's got two cardboard/plastic gasket and two metal ones, I'm just not sure if the plastic one goes on first or the metal one.. and that's for the backside and the front side
I have no idea what i did wrong with mine. At first when i'd go to start my engine it would only run with the choke on and even then it would only stay running for about 10 seconds at a time idling all rough like. Everybody told me it's either the gaskets or carb needs a cleaning. So i disassembled the carb gave the inside a good cleaning put back together and made sure all gaskets were in proper order got everything tightened down and went to start it but now it won't start at all. Not even with choke on. Does that white plastic piece inside the carb bowl that holds the needle need to be facing a certain direction or does it not matter as long as the needle is going into the brass hole ? I'm wondering if i reassembled that wrong now ?
Thank u
Hey I’ve taken those black rods out but I want stock carb back so does the side with more treading go into the block or the side with left lmk ASAP PLEASE
The end of the stud with the least amount of threads goes in the head