Awesome book that gives you step-by-step photos ruclips.net/user/postUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
Everything about this is enjoyable. Even the commercial is great. It’s nice to be able to be entertained the entire time. Makes these videos seem so much shorter.
Love double stick tape! Quick tip, I've found that once I get a piece of the tape off the wood/template, I can use that piece to easily remove the other strips still attached to the wood/template. Works like a dream and saves time on the "roll up" maneuver haha
Yes the bitsbits whiteside flush trim bits are the bomb!!!! I use them in my shop and they are perfect for shaping furniture components!!!! Great product, pricey but are rugged and stay sharp forever if used wisely. Whiteside also offers a resharpening service. Great vid!!! nice build!!!
During the closing song my dog woke up, terrified, and looked at me, like, "WTF!!" But I had watched the ad, and actually LOLed, out loud, at your ad-inspired shenanigans. I also felt a surge of pulse at your hip thrust tutorial. And Rubio Monocoat is now part of my lexicon. I thus find myself a puppet to your wares. Dammit.
I must say, I have not laughed this hard for a while before seeing your intro. But the desk build is inspiring. We recently made two cherry desks for our office. They turned out great. They are more of traditional desks with barley twist legs. We enjoyed working on them. We made a four-part video on them on our channel but they flopped. Good to see your video is doing really well.
Since your bitsnbits template bit cuts like butter, can you do a video on how to route with butter? You know, just in case I can’t find my bitsnbits compression bit.
You are so right; the roundover on all the frame pieces/sections/parts/wood/project (pick your favorite) was a game changer for the overall look! The files draws look like they will float in the frame, why not have the top float off the frame? Just a thought. Love the project!
"check your miter saw guide... you might have a trenching feature"- Bourbon Moth I thought "yea, right"... well, you're correct! I learned my new thing today, so thanks
Not going to lie... when you left the front and back pieces/sections/frames standing alone on the workbench, I felt anxiety about them falling over. But... I had some Bourbon, and suddenly, I just didn't care about that anymore. This piece is looking great!!! I can't wait to see the finished piece. Thanks!!
Very cool joinery there young Hibbs! Craig deserves this reward for the things you do to him. I hope we'll soon see the drawers added in a video too please.
I might add when using the depth gauge (trenching) use a light hand as with most mitre saws I've used if you push hard you can go deeper than you mean to :)
Absolutely stunning desk. If it was mine, it would have pride of place in my office but I would not put ANYTHING on it otherwise I would be masking its beauty. Well done fellah!
Hi Jason, over the couple years I’ve been watching you, you have convinced me to by a domino. Which one? I build mostly cabinetry and tables…but I like to do slab furniture (no river tables😂)
Stop worrying about your domino use Mr Hibbs. You make great content, you're using a tool that helps. If people can't figure out a dowel jig, half laps, or some other method it's on them. Great job per the usual.
Awesome book that gives you step-by-step photos ruclips.net/user/postUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
I really hope plans are made available for this desk. I think it is one of the best projects done so far.
At 28:52 my three dogs began howling at the television. Beautiful!
Same over here.
Same
BWAHAHAHAHA!!!
my neighbor's dog too hahaha
Best advertisement for a sponsor I’ve ever seen, very funny!
Treadmill section had me in stitches. Genius!
Did you fall off your treadmill?
Elegant design. Drawers a bit of a challenge. Looking forward to part 2.
Everything about this is enjoyable. Even the commercial is great. It’s nice to be able to be entertained the entire time. Makes these videos seem so much shorter.
I love this guy! His videos are not boring . . . and sometimes with adult humor . . . lol
28:52 is why I love your channel😂. Fantastic builds, smooth bourbon, and background music that makes my eyes water.
Great video as usual! You should sell your angel-singing voice at the end as a separate video with a slow-motion leafs falling
The scene on the treadmill was hilarious 🤣
And the desk is gooorgeous!! 🤩
Those folding stairs are possibly the coolest thing I’ve ever seen
That background music at the end of this video made me quite emotional, I admit I may have shed a tear or two hearing this majesty.
Dude. You are the funniest guy on you tube. Thank you.
Your singing at the end earned my like and this comment. Congratz!
I really love that desk. My dad had a desk like that when I was a kid. I remember the metal brassy smell inside the drawers
Absolutely beautiful
So many bonus points for the music from The Woodwright's shop!
Ok. The beautiful background music, and the sweeping in my socks song, your ready for the top of the charts! 😂😂😂😂
Love double stick tape! Quick tip, I've found that once I get a piece of the tape off the wood/template, I can use that piece to easily remove the other strips still attached to the wood/template. Works like a dream and saves time on the "roll up" maneuver haha
Yes the bitsbits whiteside flush trim bits are the bomb!!!! I use them in my shop and they are perfect for shaping furniture components!!!! Great product, pricey but are rugged and stay sharp forever if used wisely. Whiteside also offers a resharpening service. Great vid!!! nice build!!!
Jason sings Celine Dion...entire collection 😳❓
I Love Your Videos!!!!
The personality shines right through.
And here I am again on a busy Saturday at work watching this. Spectacular job, though.
Absolutely beautiful Skeleton bro! I love the Mid century stuff too, best era for wood furniture.
Looks great, I'm all Walnuted out as I've built tons of walnut this and that over the past few years. Time for a new classic wood look.
Very nice Danish style. Grew up with these back in the 60's.
Beautiful music, brought a tear to my eye
Funiest wood working video I have ever seen! Thanks for the laughs!!
And the desk is beautiful!
Saludos!!
During the closing song my dog woke up, terrified, and looked at me, like, "WTF!!" But I had watched the ad, and actually LOLed, out loud, at your ad-inspired shenanigans. I also felt a surge of pulse at your hip thrust tutorial. And Rubio Monocoat is now part of my lexicon. I thus find myself a puppet to your wares. Dammit.
I used a mitred half lap on my head board using the trenching feature and it came out great especially for 6 inch wide oak boards.
Absolutely beautiful!!
Finally!! Some cool furniture again!
Those folding stairs are so cool!!!
Gorgeous wood! Love the style of this too. Love the humor.
Beautiful desk. The most beautiful part was the finishing song :)
I must say, I have not laughed this hard for a while before seeing your intro. But the desk build is inspiring. We recently made two cherry desks for our office. They turned out great. They are more of traditional desks with barley twist legs. We enjoyed working on them. We made a four-part video on them on our channel but they flopped. Good to see your video is doing really well.
I love watching your videos, even though I don’t have the tools to make a desk it’s still awesome to watch and learn.
Loved the treadmill workout!
Saturday mornings are made better by a new BourbonMoth video.
That is super nice! When you're done with that, I have some hickory I'm going to make a desk for my wife with...
Since your bitsnbits template bit cuts like butter, can you do a video on how to route with butter? You know, just in case I can’t find my bitsnbits compression bit.
Beautiful desk. Awesome work. Can’t wait to see the final look once it’s all done. Keep them coming.
the funniest woodworking content i've ever seen🤣🤣🤣
Will plans be added to your website it looks a fun build
What a beauty!
You are so right; the roundover on all the frame pieces/sections/parts/wood/project (pick your favorite) was a game changer for the overall look!
The files draws look like they will float in the frame, why not have the top float off the frame? Just a thought.
Love the project!
Beautiful work
29:20 - literally the most beautiful music I have ever heard
ruclips.net/video/mcjtQtIReyk/видео.html - "Hymn to the Sea" from 'Titanic'...lol
Quite the sawdust berm in that AG1 ad!
really nice build and presentation. informative and enjoyably paced.
Love the “Woodwright remix” in the background ✌️
Incredible work!
Looks stunning ❤that little red set square is super cute lol 😍
Burbon Moth you are so humorous.
I get such a kick out of watching your videos and really appreciate you not doing everything in fast forward that way I learn from your expertise.❤❤❤
Holy crap… you killed that Twinkie and cupcake!
Nice desk.
Love the video Learned a lot! Patience is the key thank you
You should give the masking tape and superglue trick a go. Ben Crow from Crimson Guitars introduced me to it and it's amazing!
I gotta say, your voice-overs are incredibly relaxing. And great content as always.
This is an absolutely beautiful build
24:21 Trim Sander??? 🤣🤣🤣 love your work!
Beautiful desk. Very entertaining video, I really appreciate your sense of humour. Don't loose your day job to become a singer.......
👍👍👍👍👍
"check your miter saw guide... you might have a trenching feature"- Bourbon Moth
I thought "yea, right"... well, you're correct! I learned my new thing today, so thanks
Beautiful desk 👌... beautiful singing!! 😂
That is flipping beautiful. Can't wait for part 2.
SCAM ALERT
I always try to use rustic walnut, since it's like 1/3 the price of normal walnut and like what you see in the video, has crazy wild grain
Ah man, that is going to be one sexy desk.
Those opening shots with the laptop - too funny. 👍
Love this desk. You are an artist.
Not going to lie... when you left the front and back pieces/sections/frames standing alone on the workbench, I felt anxiety about them falling over.
But... I had some Bourbon, and suddenly, I just didn't care about that anymore.
This piece is looking great!!! I can't wait to see the finished piece.
Thanks!!
Worked as orthopedic mechanic for a few months and honestly double sided tape is mvp.
Very cool joinery there young Hibbs! Craig deserves this reward for the things you do to him. I hope we'll soon see the drawers added in a video too please.
Huzzah!
Great stuff. Thanks for sharing.
Nice frame, love the edges ❤
Looks awesome
Congratulations on having a lot of subscribers you are almost at one million subscribers 👍
I might add when using the depth gauge (trenching) use a light hand as with most mitre saws I've used if you push hard you can go deeper than you mean to :)
Absolutely stunning desk. If it was mine, it would have pride of place in my office but I would not put ANYTHING on it otherwise I would be masking its beauty. Well done fellah!
I like using Custard Cream Biscuits for joining wood and thy fit the domino's and the biscuit cutters
I'm sure Craig will love his new desk.
Good Job bro,
A "trim sander"? Dammit... I don't have one of those. Yet another tool I'll need to invest in to be a solid woodworker.
WOW, gorgeous!
the frame looks amazing! love the look.
however, your singing scared my cat 🤣
That desk looks awesome. Probably a stretch for my current skill set, but WOW.
Wow I really like that you did good
Watch out for those oil rags!!
I would love to know where Craig's chair came from. Looking forward to part 2!
Hi Jason, over the couple years I’ve been watching you, you have convinced me to by a domino. Which one? I build mostly cabinetry and tables…but I like to do slab furniture (no river tables😂)
Dude, you are crazy funny. And a awesome builder, and craftsman. Not bad on the tunes either !! 👍
Ah bro the Titanic hum bummed me out lol nice desk!
Looks sooo good, thanks for sharing with us!
The highlight apart from the table frame has to be the musical sound over🎤. Voice like an angle
WOHOOO! Early to a BM vid! This looks damn interesting!
No regrets: ruclips.net/video/q9PK0r_4KLw/видео.html
Stop worrying about your domino use Mr Hibbs. You make great content, you're using a tool that helps. If people can't figure out a dowel jig, half laps, or some other method it's on them. Great job per the usual.
I bought the plans and am building the desk, but I would love those two files so I can also make my leg and Lboard templates with my Shaper Pro.
gotta love a half inch bit in a trim sander =p
Awesome intro!!
As always, GREAT job!