Why are Our NEW Tides Shaft Seals Leaking?!
HTML-код
- Опубликовано: 13 окт 2024
- In this episode we review the common causes for Dripless Shaft Seals to Leak or Drip and why our Brand new Tides Marine Shaft seals continued to leak!
We had a slow leak on starboard side and an recently developed an infrequent drip on port side. Due to age of Boat and Seals we decided to replace the entire unit rather than just using the spare seals to repair the leaks. After replacing both starboard and port Tides Marine Shaft Seal systems we re-launched the boat only to find out that the new Seals were both leaking even worse than before!
We deduced that the problem must be the shafts. We contemplated buffing out the shafts, trying a custom made Glides Seal system ( to cover some imperfections in the shaft). We sent the shafts out for inspection ( hoping for repairs). But unfortunately we were told we needed 2 New shafts!
We use Epidemic Sound for our music. Give them a try: www.epidemicso...
Autumn Skies
www.epidemicso...
Are you able to provide an approximate charge to lift your vessel out of the water? As well, what are the new shafts made of? Stainless or duplex stainless? Thank you in advance.
I believe they are stainless steel.
Cost approx $1000.00 to haul out/ block and launch.
87 28 ft carver voyager.I half to replace dripless seals
Good luck. As long as the shaft is in good shape the new seals will be perfect. We have no issues w the Tides seals!!
@@cruisingwiththewildherrons1793 hoping not.
how much did that cost ?
thanks
A horrifying BOAT per foot x 2.( 19 feet long).🤬 🤑. They no longer recommend repairing shafts since they wont certify repaired ones.
@@cruisingwiththewildherrons1793 Just curious, when you say a horrifying BOAT (bust out another thousand), are you saying $1,000 per foot X 19 = $19,000 X 2 = $38,000 ???
@@maxmann8607 I cannot recall the exact total. But it was darn close . That was total : install / repeated haul outs/ etc.
@@cruisingwiththewildherrons1793 WOW! That’s crazy!! Thanks for replying. We were looking at a ‘00 sea ray 480 sedan bridge that came with two spare props and two spare shafts. I didn’t realize the value of that. Deal fell through and we ended up with a sundancer.
Thanks for posting!
We gave up on our tides marine seal could not get it to seal so it’s in with a Volvo penta seal.
That is very interesting to hear. I have to say, once we got new shafts the Tides Seals are functioning perfectly. No leaks. Our shafts did have very minor curve noted so we suspect that was our issue.
We'll stick to packing seals.
Probably a good idea!😃
Teens seriously try 20 blow then you can say it’s cold!!!!
I am a Floridian.. I would die in 20 below.🥶🤣
Lol