As I’ve used it I think that’s kind of its strong point where I like to use the 1-1/2” nails so I don’t blow out the side. Face frames, door casings, corner trim pieces, etc.
Thanks for the video. I’m removing my inwall ac unit and going mini split. Can I use this Brad nailer to build the frame and secure it to the existing framing in my house?
You’re welcome and unfortunately this is WAY too small for that job. You’ll want to use a 30 or 21 degree framing nailer with at least 3” .120 nails for that job. Honestly you’ll probably be best off screwing it with #9 3-1/8” construction screws. That way you won’t have to spend on a nailer and just use your drill or impact to drive them.
When I saw these at pipeline I really wanted one. Almost a year later there not anyplace local and I ask my milwaukee rep he's like I didn't know thoes existed or were comming out. I really appreciate the size at least on screen I use a ryobi hp brad nailer currently. Going into my general maintenance tote is a ammo can (door install trim ect.). Until now I had a ammo can with fuel osslating tool, fuel jigsaw and fuel circ saw. Size is a huge consideration and with this it may fit onto something small instead of a seprate bag. You get enough seprate bags now your at a ton of trips into a place. Or you get lazy and try to go without so avoid carrying stuff in. Thanks for the video.
These took forever to come to market. Will be smaller than the ryobi for sure. You got the m18 or the m12 fuel oscillating tool? I got the M12 and love it but want 2 because I use them so much. You recommend the M18 if you have it or just get second m12?
I use a m12 fuel osslating tool and it's funny my guys shay it's mote powerful than the dewalt xrs we have now collecting dust. I have used the first and second gen m18 oss tool and first gen is a joke. The second gen seems to be decent alot of vibration compared to the m12. I suspect the m18 dosent chew through batteries as badly but I'll swap them out for the smaller size. The other day I had my m12 fuel osslating tool cut through a Honda cv axel with a diablo carbide blade took an entire 5ah ho battery bit did it. My vote is get the tool that's the form factor you want and not wish you did.
I recently purchased the M18 16fngs and it’s been great so far, so after hearing Milwaukee offer a 23g brad nailer I was looking to add that to my kit but after searching many of the Milwaukee stockists over here in the UK I was disappointed to find out nobody has it available for some reason. So it looks like I will be purchasing this instead 👍
I love the m12 23ga nailer. Great for making jigs real quick or to hold things in place while I fully fasten it without leaving an extra mark. Definitely recommended
Not sure if that means I’m leading the pack or a doofus! The 1-1/2” capacity does make this a little more niche but it is a LOT more packable. Hoping this video will help others make their decision!
Love the 2.5HOs they’re definitely my all round favorite M12 batteries. Might help with the rapid fire speed but so far this seems to sip batteries so I’ve been leaving the 2.0 on it. Thanks for watching!
I am Totally into weight/performance. Since I used the 90 Degree die grinder M12 I am completely sold to Milwaukee. Would Love that nailer for worksite. I am into delicate work. So don’t need M18…
When someone says brad nailer they are referring to the 18ga finish “brad” nails that it shoots. 18ga is the diameter of the nail shank. The lower the number, the larger the diameter
I bought one but found that you must pull the trigger to turn on battery life indicator, and not, as per the instructions, which say that indicator lights up after pushing power button on. Is this what you found?
Agreed with the 16ga. I’ve just gotten by because I can’t justify the additional gun at this time. For thinner and smaller profiles doesn’t seem to be an issue though 95% of the time
Ehh, not sure everyone would agree. 1/2” baseboard means only 1/2” of nail in the baseplate and studs. Thicker base and 5/8” sheet rock makes that even less
Typical Milwaukee. Keep bringing useless tools out but not improving the ones they have, no different than Makita these days. This cordless nailer tech can’t get any better or lighter. It’s a gimmick. The money is in the batteries not the tool. Appreciate the review mate.
I think it’s really about weight and packability. Biggest downside of battery nailers is the weight, so lots of overhead work would really make sense with the M12, assuming 1-1/2” works. Same goes for a tool that isn’t used everyday but here and there. A lot easier to bring it along or store in a modular tool box setup as a just in case option. I do think it’s a niche tool but I really wanted it so here we are!
I have both now. Love the m12
Got it for assembling cabinets before I screw them
As I’ve used it I think that’s kind of its strong point where I like to use the 1-1/2” nails so I don’t blow out the side. Face frames, door casings, corner trim pieces, etc.
Thanks for the video.
I’m removing my inwall ac unit and going mini split. Can I use this Brad nailer to build the frame and secure it to the existing framing in my house?
You’re welcome and unfortunately this is WAY too small for that job.
You’ll want to use a 30 or 21 degree framing nailer with at least 3” .120 nails for that job.
Honestly you’ll probably be best off screwing it with #9 3-1/8” construction screws. That way you won’t have to spend on a nailer and just use your drill or impact to drive them.
When I saw these at pipeline I really wanted one. Almost a year later there not anyplace local and I ask my milwaukee rep he's like I didn't know thoes existed or were comming out. I really appreciate the size at least on screen I use a ryobi hp brad nailer currently. Going into my general maintenance tote is a ammo can (door install trim ect.). Until now I had a ammo can with fuel osslating tool, fuel jigsaw and fuel circ saw. Size is a huge consideration and with this it may fit onto something small instead of a seprate bag. You get enough seprate bags now your at a ton of trips into a place. Or you get lazy and try to go without so avoid carrying stuff in. Thanks for the video.
These took forever to come to market. Will be smaller than the ryobi for sure.
You got the m18 or the m12 fuel oscillating tool? I got the M12 and love it but want 2 because I use them so much. You recommend the M18 if you have it or just get second m12?
I use a m12 fuel osslating tool and it's funny my guys shay it's mote powerful than the dewalt xrs we have now collecting dust. I have used the first and second gen m18 oss tool and first gen is a joke. The second gen seems to be decent alot of vibration compared to the m12. I suspect the m18 dosent chew through batteries as badly but I'll swap them out for the smaller size. The other day I had my m12 fuel osslating tool cut through a Honda cv axel with a diablo carbide blade took an entire 5ah ho battery bit did it. My vote is get the tool that's the form factor you want and not wish you did.
Tool reps that dont know their pipeline piss me off, like talking to a fkn potato.
I recently purchased the M18 16fngs and it’s been great so far, so after hearing Milwaukee offer a 23g brad nailer I was looking to add that to my kit but after searching many of the Milwaukee stockists over here in the UK I was disappointed to find out nobody has it available for some reason. So it looks like I will be purchasing this instead 👍
I love the m12 23ga nailer. Great for making jigs real quick or to hold things in place while I fully fasten it without leaving an extra mark. Definitely recommended
Just posted asking if anyone bought this yet… then here you are 👍
Not sure if that means I’m leading the pack or a doofus! The 1-1/2” capacity does make this a little more niche but it is a LOT more packable.
Hoping this video will help others make their decision!
I love these comparison videos, please do more
Thanks! Overtime these will turn into reviews hopefully too. Got tons of potential, just what will I get to is the question
2.5 HO is the way. The 4xc is nice too. And the 5HO. But the. 2.5 is awesome for keeping it lightweight and still power. Good video
Love the 2.5HOs they’re definitely my all round favorite M12 batteries. Might help with the rapid fire speed but so far this seems to sip batteries so I’ve been leaving the 2.0 on it.
Thanks for watching!
I bought the m12 and loved it, but I returned it and went with an M18 for more versatility.
Yeah I could see that. If a guy can only own 1 then the M18 makes a lot more sense
I am
Totally into weight/performance. Since I used the 90
Degree die grinder M12 I am completely sold to Milwaukee. Would
Love that nailer for worksite. I am into delicate work. So don’t need M18…
This thing is calling your name!
@@EngineersPerspective701 :))
When somebody tells me that a nailer is a brad nailer,what does that means.I know that it is a nailer for sure but what makes it a Brad nailer.
When someone says brad nailer they are referring to the 18ga finish “brad” nails that it shoots. 18ga is the diameter of the nail shank. The lower the number, the larger the diameter
@@EngineersPerspective701 Thanks,I now get it.
I bought one but found that you must pull the trigger to turn on battery life indicator, and not, as per the instructions, which say that indicator lights up after pushing power button on. Is this what you found?
@@jadams4368 the battery life indicator lights up if it’s on and then the trigger is pulled.
I guess i will stick with my m18 cause i use 2 inch nail for trim and baseboard
Definitely not as versatile but 1-1/2” nails for door casing into the jamb or face framing on cabinets, etc.
I like it however 2” capacity would of been ideal
I feel same!
1.5 nails perfect for most trim install work. Base should be done with 2”-2-1/2” 16g imo 30 yrs finish carpenter
Agreed with the 16ga. I’ve just gotten by because I can’t justify the additional gun at this time. For thinner and smaller profiles doesn’t seem to be an issue though 95% of the time
You also don’t need 16g for MDF base, which is really common where I live.
3:45 Baseboard only requires inch and a half nails. Everything else; it's waste
Ehh, not sure everyone would agree. 1/2” baseboard means only 1/2” of nail in the baseplate and studs. Thicker base and 5/8” sheet rock makes that even less
2" brads ALWAYS for baseboards. You are smoking rocks.
I actually tend to agree that after 1.5" brads it is time to step up to a 15ga. You have to fill the nail holes anyway.
I want to love this, but I don't see the point in 1.5" brad nails.
The 1.5” nails do limit it for sure. I think overhead work or limited space for packing tools are going to be your big drivers for this tool
I bought one today. It leaves gnarly holes. It’s probably going back.
Is your depth setting too deep? They seem pretty average to me
Do you have the rubber tip on it? If not, That can also be a reason it’s marking up the material.
Typical Milwaukee. Keep bringing useless tools out but not improving the ones they have, no different than Makita these days. This cordless nailer tech can’t get any better or lighter. It’s a gimmick. The money is in the batteries not the tool. Appreciate the review mate.
Exactly what I was thinking. Really no need to make the m12 version since the m18 version is so good. Besides sales
I think it’s really about weight and packability. Biggest downside of battery nailers is the weight, so lots of overhead work would really make sense with the M12, assuming 1-1/2” works.
Same goes for a tool that isn’t used everyday but here and there. A lot easier to bring it along or store in a modular tool box setup as a just in case option.
I do think it’s a niche tool but I really wanted it so here we are!
@@EngineersPerspective701 waste of money. But it’s your money I suppose