Why does a carpenter use so many different nail guns?
HTML-код
- Опубликовано: 25 дек 2021
- BECOME A MEMBER OF FINISH CARPENTRY TV:
/ @finishcarpentrytv
GLUE I USE: finishcarpentry.tv
INSTAGRAM: / finishcarpentrytv
EVERY TOOL I USE: www.amazon.com/shop/finishcar...
DeWALT LASER LEVEL I USE: amzn.to/2FI8Td1
15 G NAIL GUN I USE: amzn.to/36Mp44F
STUD FINDER I USE(FAVORITE): amzn.to/30moWXq
FAVORITE TRIM NAIL GUN(MILWAUKEE 18): amzn.to/37Rr3F2
MAIN MITER SAW: amzn.to/2SML4bF
ONLY UTILITY KNIFE I ABSOLUTELY LOVE: amzn.to/39GGYIb
MY TRACK SAW: amzn.to/36rLYy3
SMALL MITER SAW: amzn.to/36kkJWj
SLIDING MITER SAW: amzn.to/39yYo9w
GET A SHIRT HERE: finishcarpentry.tv/
EVERY TOOL I USE: www.amazon.com/shop/finishcar...
VIDEO/CAMERA GEAR*
MAIN CAMERA: amzn.to/2Kk1Tan
LENS: amzn.to/2MReIej
SMALL CAMERA: amzn.to/2KlLbr3
MIC: amzn.to/2Kkbj5O
DRONE: amzn.to/2IPsby0
www.dfwcrownmoulding.com
*above are affiliate links 
Хобби
Love the 18 gauge brads for holding pieces together while the glue dries. But I keep shooting needless brads cuz, they're just fun to shoot it! 😂
Framers be like “which one you got more nails for?” “Well there ya go. Use that one”
A Brad gun to frame?… or a 23 gage? Bad idea
Thanks for a very helpful video. I've always wondered which gauge to use where. Can you do another video where you explain which length of nail you use for various trim install? Like use a X length to install window trim. Use a X length to install baseboard. Use X length to install install shoe moulding. Use X length to install crown.
Man, I've been looking for this explanation for like a month now. Going to start getting into some heavy DIY stuff and this makes a TON of sense now!
Man, I remember that red DFW shirt. You’ve come a long way and definitely deserve the success. Keep up the good work, and thanks for sharing your knowledge.
One of most concise, informative and "to the point" videos on RUclips, let alone on the subject. Great job. Wish more people made succinct and useful videos like this. Subscribed, keep up the good work!
Absolutely excellent video! As someone who knows quite a bit about construction, yet nothing about nailers, this was the perfect explanation. Picking up a 16-gauge nailer next week.
Finally the that I was looking for! So much confusion around what these guns do and are used for. And I don't need another "unpacking" video! You just helped me decide to keep both guns that I just bought-the 16 and 18. I had been thinking the 15 and 18 but don't think I'd be using the 15 much right now with what you showed here. Doing a lot of trim and tongue and groove. Can always go up to the 15 when the time comes if it should. Thank you so much! By the way I love your "Come and take it" t-shirts-what a hoot!
Thank you very much for the explanation of the nail guns. I have been looking at either the 15 or the 16. You have definitely helped me decide.
Finally...been trying to work out sizes and whys for a while now. Thanks!
I was on my way to Home Depot today to by a finish nailer. I have the pin nailer already but was going to go with the 15 gauge nailer but after this review I going with the 16 gauge. I am just a guy who screws off in the garage and seems this is the best solution for me. Thanks!
Thanks for this video, Richard! It definitely clears things up for me! I truly appreciate it.
Excellent break down of different nailer gauges - especially Milwaukee. All that info is not easy to digest if you're not a carpenter by trade. 16G it is! Thanks man.
Thanks for the vids , best of the season to you and yours , Peter
I’ve done finish carpentry for over 20years and only have a 15 gauge and a 18 gauge gun. I’ve never felt or thought like I needed anything else. It’s done everything I’ve ever wanted or needed them to do.
What do you primarily use for baseboard and door trim?
Same here I just recently bought a new rigid 21.0 degree framing nailer, air power this thing is a beast !
Ya but this guy uses Milwaukee tools and needs to show them off 😂
@@cjones247918 Guage for 1/2" or less thickness. 3/4 thick 16 Guage unless it's finger jointed than I might use an 18
@@cjones2479In my use it would depend on size and thickness of material, for thinner/smaller width I usually add some power grab and use 18GA, for thicker stuff 15GA suffices and doesn't break material either. Any feathered down edges I use 18GA or even 23GA sometimes depending on type of wood/material.
I'm new in those DIY projects and was thinking of getting myself a new nailer and wasn't sure what to consider. Funny thing is I thought only one nail gun can be used for all jobs😂😂. Thanks mate your video is helpful and educational. Thumbs up 👍 for me. Keep doing those videos you are helping plenty of people out there.
Your videos have really helped me step up my game. I really do appreciate you.
I feel like for my purpose of building a small cabin I should grab the framing gun and the 18 gage. Framing can help with walls and structure and 18 can do all the trim and smaller jobs. Thanks for the video!
Awesome I'm getting into trim nailing so you excellent information will help me figure out what nailer to get. You earned my subscription.
Very useful explanation thanks. I was wondering what to get for a garage reno and this answers the question.
Thank you Richard for answering my question!
Excellent video, really broke it down to how the different gauges work in application.
Nailed it! Love watching ur vids keep them coming
Great video. I am deciding between the 15 and 16 guage and you clarified my decision. Thanks
The video I've been waiting for!!! Been trying to figure it out. Many thanks 🤙🤙
Finally, someone explained it clearly! Thank you
I absolutely LOVE my 23 gauge pin nailer for holding pieces in place while glue dries. For example, when installing base molding around the bottom of a wood filing cabinet. I glue the base molding where I want it, and instead of using clamps, I shoot pin nails. They hold the molding in place, the glue dries, and often I can't even find the pin holes to fill them!
i thought i was the only one :(
Thanks! I've been wanting a rundown like this for some time.
Great and very informative video that cleared up those very questions. Semper Fi.
Lunch time run to Teague today whilst the weather is nice in TX. Then bop over to Angelo’s for a bbq sandwich. Happy holidays Richard!
Always great information. Always well done. Greatly appreciated!!!!!!
Very informative and right to the point--no BS and obviously knows what he's doing. Thank you.
Thank you bro for the review I needed to know that!! 💯🙌🏽🤜🏾
Thanks for this video ! I've been wrestling with this exact problem and even considered emailing you. Saved me and you the trouble .. LOL ! Thank you.
I only ever use the 23 ga. Interesting to learn the uses for the other 4. Thanks for the vid 👍
On point! The overview is awesome!
Thanks again Richard for an excellent video. I have the Mil Framing, the 15 & 18.
Me too, just deciding if I need the 23 pin nailer haha
I started out with a Paslode 16 w/straight nails and still have it. The video is correct and helpful.
Great!! Now I KNOW I NEED to buy a framing nail gun and pin nailer to go along with my 18g Brad nailer. LOL. awesome video as always.
Let’s be honest, when you say “a lot of people have been asking”, we know who really asked why you have so many nail guns.
The ol ball and chain lmao
LOL
😂
He was spending a lot... Had to make the video to keep the wife in the dark 😂🤣😂🤣😂
The same one that is slamming his doors 🤣
My go to nailer for trim is the 18g. If needed I combine with adheasive, rather than use a 15g like I see a lot of trim guys use for base etc. I still have my 16g air nailer from about 25 years ago, it's hardly got any use on it. I think I still have the same box of original 16g nails I bought at the same time.
I love the 15g for heavier finish applications, and of course hanging doors like you mentioned. 23g nailer is a wonderful tool for small trim. I've always wanted a 21g which I've seen a lot of other trim guys utilize in their work.
Thank you for making this video!!
Got'em all, plus the 1/4" crown stapler
I had doubts about 18s and 16s. Now I'm clear about the difference of those 2. Thanks for you explanation amigo. I own the framing and the 18, now I know for sure I need the 16 meantime.
This is an excellent presentation!
Thank you for this video. I was almost going to buy an 18gauge Ryobi but then..... this helped me to bump it up to 16gauge. awesome info thank you so much.
Great video. I was honestly looking for this exact answer for the last 2 hours.
Thank you for this information!
Thanks for the well needed explanation!
I do appreciate the explanation! Great information
Thank you for this! Now when my hubby asks why I need all these nail guns, I’ll refer him to your video 😝
exactly the info I was looking for - thanks!
This video is so helpful. Thank you
I love the 15 gauge because I prefer the extra holding power. I also have a narrow crown stapler.
This was great! Thank you!
Very helpful! Thanks!
Just got my 18 gauge Milwaukee, can’t wait to use it :)
Another great video!!! With the nail hole of the 15 gauge being so close to the size of a trim screw, you can get by without the 15 gauge until you have the $$ for the 15. Especially setting doors, using composite finish screws that adjust the jamb in and out once the head is set (the specialty screws for that task cost 👎). The composite screws do the same job for less. Just a tip for those who can’t get that 15 just yet.
Good advice. I did all the door jambs, casings, window trim, baseboards, etc. while renovating my house and the 18 gauge was the best option. Those brads can at least hold a door jamb in place until you drive a few screws. The screw holes are getting covered by the door stop and / or hinges anyway so I don't care about the size of the hole.
i've been looking for this video for a while, thanks a heap- from west australia
Carpenters and joiners are the trade that spend most on tools as we NEED them all. Table saw, nail guns, mitre saw, 1/2 inch router, palm router, track saw, impact driver, drill driver, sds drill, jigsaw, planer, circular saw, and not to mention the number of hand tools.
Hardly, have to spend a lot more to do other trades.
I hate buying tools but I find myself buying all that you mentioned and more. Sometimes you have to buy 2 of the same tools too. I told myself I will only buy 1 Sliding Miter Saw 12" Ridgid and as heavy as it is, there is no job it can't cover and since I am not making furniture I am good until it broke and while in the shop I ended up having to purchase a 7 1/2" compound Sliding Milwaukee because I was only doing trim work then.
I use a 18 Brad nailer for everything even doors when I do a door I use 3 nails in 1 spot and I shoot straight, 1 nail left and right, the amount of nails I go through is crazy that is why tomorrow morning I am getting a 15 & 21 Brad nailer to join my 18 gauge Milwaukee.
Crown stapler is so under rated. Not even a mention
Very true. My 1/4” battery stapler is one of my favourites for so many things, and they hold tough!
Great video! Very informative. Thank you!
95% of the trim I install is pre-stained and I find that the 21ga (with a slight head) works great on casings and base materials. I do not want to go back and with filler to match and fill in all those holes. Very few people even bring up the 21ga nailer
your video was the best , so Clear and simple
Thnx man! Very informative and well-done review👍.
very straight to the point and uses and good info nice video
Very informative. Thanks! Would love to see a video of how you set doors.
15 Gauge both FN & DA (Angles), 16 Gauge both 20° and 0° (Flats), and 18 gauge brad nailer and crown staplers (narrow and wide) along with a framing nailer, either full round head 21° or lipped head 31° nailer along with a stick or coil roofing nailer, and 23 gauge pin nailer all can have places in shops. I use mostly 20° 16 gauge and 18 gauge brad nailers for probably 90%+ of trim jobs. I like both the flatter angle nailers regarding framing and 15 gauge as they hold more nails per magazine, tend to have larger full round heads, though they don’t get into the same spaces. I also live the 20° 16 gauge nailer over the old school flat 16s.
Been in the trades for over 3 decades and can say while you may mostly use a couple they all have their uses and it’s nice having the rare ones when you need them. Glues have come a long way over the years and with the newer ones nails aren’t even needed; 23 gauge pins can act as clamps with glue while it’s setting and can be the best of both worlds near imperceivable holes and great holding. A lot of manufacturers simply don’t keep up with new technology or techniques. I’ve never had a problem or failure with installing ship lap or T1-11 with 18 gauge narrow crown staples; they just hold better than brads or even 16 gauge nails.
Thank you for the explanation that was so informative.
Thank you for such a great explanation 👊
Other than setting doors, I think the 18 will do most of the other stuff just fine. I own the framer 18 and 23.
Do you install larger trim (baseboards, crown moulding, ect. ) with an 18 ?
@@kenbagwell8551 I would use 16 personally
@@kenbagwell8551 in cabinetry we use the 23 ga for everything short of assembling cabinets which we use the 18
@@kenbagwell8551 Yep and I have not had any problems.
The 18g has the disadvantage of only shooting 2 inch nails. So if you're doing a 5/4 header you're only getting a 1/2 inch penetration in to framing. I'd say. at a bare minimum, you need an 18g and and a 16g because you can get 2 1/2 nails in a 16g and an 18g is delicate enough to do most tasks. If I only ever did trim I would have a 16g, 18g, 23g and be totally fine. I've set plenty of doors and windows with a 15g and a 16g and I'm not sure there is a huge difference in strength, at least at a home gamer level. As a professional I'll always choose 15g on paint-grade doors and 16g on stain-grade doors.
Your videos are great I've learned alot. Thanks
Great video, clear direct information.
Awesome breakdown, thanks
Great information
I generally run a framing nailer, 16g, and pin nailer cause this works for all my woodworking needs. I've use 16g nails to set doors and window boxes, but usually follow up with some screws cleverly hidden for the durability factor.
Totally agree. I happen to have an 18 too, and thus use it more than the 16 for trim. BUT if only one, the 16 is it. But I add another to it. I have a siding nailer too, (coil) as most framing nailers don't run siding nails well, (too often jamb)
We do a lot of 7’ interior doors with 9’ ceiling
These mdf doors are so freaking heavy I use 15 gauge and take stop off hinge side and screw it 4 places with matching top hinge bomber
Agreed, I always follow up with screws. The 15 and 16 are so close that I find them to overlap. I have and use a 16 GA for that reason. I just got a 23 GA pin nailer... man, how I got along without it before makes me shake my head. So useful for small/delicate jobs.
Buy them all!
Merry Christmas ma boy
Really good video. Thank you
I usually use my 15g for setting doors, but have used an 18g brad with 2" nails. Not with a "pre hung" door, but with a knock-down or site built frame. Because then you can shoot the nails down the strip where the door stop will later go, and if using 18g I can fire in a bunch extra for better strength without leaving 100 nail holes to be filled.
The 23 is also good for small hardwood trims like quarter rounds and panel moldings
Good breakdown, only video or content period I could find on what each nailer was used for.
It really depends what you do. This guy is truly professional he needs all of them! I am truck a driver and I have 2 small boxes with tools in my truck wich are around 400$ worth. My father is a truck mechanic and he has 3 huge drawer snap-on carts full with tools. He spent on everything close to 50k$. Everything has lifetime warranty. Whatever he brakes he gets new for free with no questions. Snap-on on guy comes ones a week. He doesn't need to go anywhere.
If you're just starting out all you need is a 18G, 15G and a framer.
Depends where you live. In my area, MDF trim and base is all that is mostly used. 16g is the most common nail for this. Enough to set the trim and after that, caulk holds it together. 18g isn't enough and 15g blows the back apart and takes chunks off if ur too close to the edge.
I'd love to live in an area that mostly does FJP. Then I'd do 15g in everything but jamb casing.
@@mudmanKCOnly 100% Maple trim here. These are multi million dollar custom homes.
18G trim. 15G for hanging doors. That's it buddy. No caulk req'd.
Excellent explanation, thanks.
I have all those as well, plus three sizes of staple guns, all get used depending on the task. I have used (don't own yet) a 21ga brad nail gun which nicely replaces the 18ga for many uses. Good holding, smaller hole to fill or see. My 15ga leaves a smaller hole than my 16ga straight nail, that tee shaped head has a larger footprint. The 21ga is on my list. It does very well on pre-finished crown and door casings. As dk states below, there is no reason to get all at once. If you're a framer, you won't need any brad nailers, but you'll need a few otheres that finish guys never will. If you get into building and remodeling from the ground up, you'll acquire a lot of these fairly quickly.
Door casing with 21 gauge? I wouldn't trust that... Unless I misunderstood.
Ha! In my garage, the length of the nail determines the gage. Most of the time....
Good run down. I'm getting the 16gauge for my quick in and out jobs. I hate getting out the compressor for 5 shots
Very helpful for buying guide. Thanks
Great information!
You so nailed it!!! Sorry, couldn’t help myself
Thanks! Great explanation!
Great video!!!
Lots of editing and good information in this video
Very good explanation~! I've asked that question a lot about the uses for each and yours is the best breakdown so far. Do you find yourself using crown staples at all? My compressor combo came with a 16 & 18 gauge and a crown stapler....probably the usual. I purchased a 23 gauge later and love it. Do you find yourself using crown staples at all in your work?
Also, just got my DeWaukee & DeWaukita shirts~! Love 'em~!!
Just bought a 40 degree nailer. Can't wait to use it tomorrow at work
Very informative. Thank you.
Stay safe out there and have a good day
I needed this video a year ago! Thankfully I bought a 16 and 18, and have been so glad I did. Like he said, the 18 is perfect for smaller trim where the 16 splits it, but the 16 has much better holding power.
Great review!
Thank you. I started my morning by not knowing anything about nail guns. You fixed that.