How to Replace Front CV Axle Assemblies 2011-2019 Ford Explorer

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install new front CV axle assemblies from TRQ on your 2011-2019 Ford Explorer. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Pry Bar 1aau.to/o5Y/1AX...
• 19mm Socket
• 21mm Socket
• 32mm Socket 1aau.to/odT/1AA...
• Trim Tool Set 1aau.to/oasM/1A...
• 5/16 Inch Socket
• Ratchet 1aau.to/ob2v/1A...
• Socket Extensions 1aau.to/obXR/1A...
• Torque Wrench 1aau.to/oa5d/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oLD/1AX...
• Copper Anti-Seize
• Gloves 1aau.to/oaRJ/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oarV/1A...
• Hammer
• Jack Stands 1aau.to/oad6/1A...
• Pole Jack
• Punch
• Ratchet Strap
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@ElCallahan]

If it takes you 14 minutes why are they charging me for 3 hours of labor. lol. Thank you for this video!

[@schifoso]

That was a very useful tip on getting the axle seated. The rest of the instructions were detailed and easy to follow. Thank you.

[@robertmartindawe]

A 5/16 socket for the strut nuts?