How to Replace HVAC Blend Door Actuator 2011-2019 Ford Explorer

Buy Now!
New HVAC Blend Door Actuator from 1AAuto.com 1aau.to/ia/1AHCX00456
This video shows you how to install a new blend door actuator on your 2011-2019 Ford Explorer. The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle's HVAC system. If the actuator isn't working, then you won't be able to control the temperature of the air coming out of the vents!
This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obEJ/1AXAA00013
• 10mm Socket 1aau.to/obDU/1AXAA00017
• 7mm Socket 1aau.to/obDU/1AXAA00017
• 8mm Socket 1aau.to/obDU/1AXAA00017
• Trim Tool Set 1aau.to/oauK/1AXXX00006
• Ratchet 1aau.to/ob5J/1AXAA00016
• Socket Extensions 1aau.to/ob3N/1AXAA00015
• Gloves 1aau.to/oaXM/1AXSS00048
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@alexanderthegrape5370]

If your Exploder only blows from one vent, most cases defrost only you need to replace the "mode door actuator" that lil guy lives behind the instrument cluster

[@jaklinalqesbols7121]

Bravo, so smart tips you give us👍

[@Robert.Youngblood]

Is this blend door the same one responsible for not allowing defrost or any change in the airflow? Our 2015 explorer only blows out the vents, we can't change where it comes out of, is this the same blend door for that? I have the blend door and a couple other tools you list, just wanted to make sure. I did watch a few videos and it looked higher up than that blend door you took out.