Do you know what brand the launcher is? I bought the exact one off of market place and have not been able to find another like it since. Thanks for the video!
Have you had actuators go bad because of maybe the physical jarring of the battery case against them? Only thing I can figure unless mine just burnt up. Thanks for the video. They worked great until half way through the session when my actuators quit working
guarr aci that could be it. I got plenty of test launches before the field, but got to the field and only got 3-4 out of each launcher before they quit. There appears to be some indentions on the case of the actuator I’m wondering if it wasn’t from the battery jarring against them maybe not being on a completely level surface? I’m going to order a couple more and see if when I secure the battery pack if it helps or not.
Steven Layne try hot gluing the battery pack or what I do is I velcro it to the actuator but still that little movement shouldn’t matter. As long as the actuator is secured to the box
Awesome video. Thank you.
Do you know what brand the launcher is? I bought the exact one off of market place and have not been able to find another like it since. Thanks for the video!
Pinfox Waterproof Electronic ABS Plastic Junction Project Box Enclosure 200mm by 120mm by 75mm (Black) www.amazon.com/dp/B06XSQZ5M6/ref=cm_sw_r_cp_api_i_Rp.GEbHRKVF61
eMylo DC 12V 1CH RF Relay Wireless Remote Control Light Switch 433Mhz Relay Receiver with Wireless Transmitter www.amazon.com/dp/B01A6VOH9W/ref=cm_sw_r_cp_api_i_Kq.GEbNR289S2
InstallGear Universal Car Power Door Lock Actuators 12-Volt Motor (2 Pack) www.amazon.com/dp/B00CZBQCR2/ref=cm_sw_r_cp_api_i_Ir.GEbGH0FQCG
CO-RODE 8 x AA 12V Battery Holder Case Box Wired ON/Off Switch w Cover Pack of 2 www.amazon.com/dp/B00VE7HBMS/ref=cm_sw_r_cp_api_i_As.GEbQRXH4CX
5Pcs 2 Pin Snap-in On/Off Position Snap Boat Rocker Switch 12V/110V/250V OT8G www.amazon.com/dp/B0725Z6FR7/ref=cm_sw_r_cp_api_i_ut.GEbDXDHG76
www.gundogsupply.com/scotbirlaun.html?SCOTBIRLAUN&gclid=Cj0KCQjw1Iv0BRDaARIsAGTWD1vqp9JzpCWqJaSk0yMtYPemQQiU9WgNEgsuiZrMKun8N3XgcR4vfM0aAiyiEALw_wcB
www.gundogsupply.com/scotbirlaun.html?SCOTBIRLAUN&gclid=Cj0KCQjw1Iv0BRDaARIsAGTWD1vqp9JzpCWqJaSk0yMtYPemQQiU9WgNEgsuiZrMKun8N3XgcR4vfM0aAiyiEALw_wcB
@@tadzius5829 it’s 6.2 x 3.54 x 2.3 inch
Sal, great video! Thank you. I ordered the boxes but they seem much larger than what you used. Are your boxes 200mm long?
Love the video. Could you give a parts list. Batt box ,
Actuator, fob I get ,
But the part with the antenna I'm not sure where to get that
Hey sorry I didn’t check up on this. The antenna is actually in the actual reciever it’s a coiled up wire just pull it straight out
FYI the link to the rocker switches are square shape not round..little hader to cut in.
Can you send me all the accessories you used?
Hi Sal! The boxes linked below come in three sizes. Are you using the 200mm or 100mm box?
Parts ?
Have you had actuators go bad because of maybe the physical jarring of the battery case against them? Only thing I can figure unless mine just burnt up. Thanks for the video. They worked great until half way through the session when my actuators quit working
Yea I’m guessing maybe you got a bad batch? I’ve used mine on at least a couple hundred launches and never had a problem.
guarr aci that could be it. I got plenty of test launches before the field, but got to the field and only got 3-4 out of each launcher before they quit. There appears to be some indentions on the case of the actuator I’m wondering if it wasn’t from the battery jarring against them maybe not being on a completely level surface? I’m going to order a couple more and see if when I secure the battery pack if it helps or not.
Steven Layne try hot gluing the battery pack or what I do is I velcro it to the actuator but still that little movement shouldn’t matter. As long as the actuator is secured to the box