Had a catastrophic failure flying over a lake with the green ones! One of the props flew completely apart while I was flying in normal mode at about 30mph. My friend told me it looked like my drone exploded instantly in mid air. Luckily, it landed within about 50’ of the bank, but it took four of us over an hour to find it. All Master Airscrew did was deny any fault. They look really cool, but unless you’re just wanting to sit your drone on a shelf and look at it, I would stay as far away from these props as possible! (There’s also a video on youtube of another pilot who experienced the exact same thing.) It shows the drone bust apart and fall to the ground. Same props!
I've been using these master props for a couple of weeks now and can say they are definitely an upgrade 👍. faster and smoother and seem to be getting a little more flight time... I got the blue and orange and yeah they look way cooler than standard... I would definitely recommend them although a little pricey
Howdy Kelly. Thank you for this excellent review of the Master Airscrew Props for the DJI FPV. Yes, I have been a big fan of Master Airscrew Pops, too, ever since purchasing them for my Mavic Pro. I've gotten longer flight time and quieter flight noise levels. I have an order in for their DJI Air2 Props now that they have solved the vibration problem. Thank you for this video review and your interview with Master Airscrew CEO Boris Iskrev; both were well produced and informative.
Thanks Steve. The MA props definitely give some small upgrades and make whichever drone you put them on look much cooler. Also - thank you for the stickers! I put one on my laptop - front and center! Take care!
I love the way they sound. They scream. One major con is voided warranty. In flight, mine made a gear stripping sound right before falling out of the air. DJI told me the 3rd party props caused my fpv to over perform and break. So I had to bust out $250 to refresh and ever since I’ve been back to stock props
Yeah, that's a shame. I actually emailed DJI support and got a reply back clearly stating that 3rd party props have no impact on the eligibly of DJI Care refresh. Then, being pleasantly surprised, I tweeted about it, with screen shots from the email from DJI. Then the DJI Twitter account replied, basically saying that employee who responded to me was wrong. 😕 Kind of makes sense, but at the same time, if I do something foolish like just drop it as I'm getting out of my car, why isn't putting 3rd party props also considered "accidentally damage"? If you're under that warranty still, it does make sense to use stock props, as you mentioned. 👍
Yes sir, I got 3 sets and I almost forgot they not the original, they firm , give the drone that firm feeling, I would definitely recommend them , yes sir🚀
Given the dimensions of the new props...They will be grippier and faster however that will cause less efficiency along with the increased weight. It will be preference in the end.
Got mine and tested them out. Definitely more aggressive pitch and louder noise factor but I don't really see any power advantages or punch-out increase. I thought the bright red would be easier to spot but they aren't. With increased structural rigidity over DJI OEM props I do expect these to be more durable hitting leaves and branches but only time will tell. I can tell you that when I launch from my back porch the new blades clear every spec of dirt and leaves from concrete and send ants flying. This beats sweeping. 😄
Have you tried the prop adapters yet? I know it's more weight centralized on the motor but if you're running a 5'1 pitch 3 that only weighs like 3.5 g it should in theory spin up a little quicker maybe? And it be nice if someone with a good RUclips channel like yourself did a 2022 review because I can see now you can get parts readily available and there's repair channels dedicated to disassembling this drone and repairing it.
I would stay away from them. I got a red set (if it matters or not) when I start the motor 3/5 times it would think there is a prop guard and it would lower the performance of the drone. There are quite of people also saying the same on the Amazon reviews.
Interesting. I'm not sure what you mean about "think there is a prop guard". Can you explain in more detail? Or post a video of what's happening. I'd really like to see it and see if I can figure out what's going on. Thanks for watching and for the comment!
@@readysetdrone I'm getting the same warning, "Prop Guards Detected". I had even sent back the first two sets (red &orange) at the request of Master Airscreww, and they sent me two more sets to test. I got the same result. I did not find it was lowering performance that I could see, but this is a very curious phenomenon. I don't quite know what to think about it... How would the drone think there were prop guards on?... I'm still flying with the new props anyway without problems, and they do look very cool.
I've never seen that warning before, even with other third party props. That's strange, to say the least! Does the warning appear right away after take off?
Not worth it. Extremely brittle. Had a catastrophic failure of a prop doing a long sweeping left turn in an open area. Blades completely snapped off at the base.
I installed master air screws on my drone & got screwed one of the three holding clips that hold the propeller to the motor cracked. I felt a shutter 200 feet up so I slowly flew back to my takeoff point knowing something was wrong & hovered at about one and a half feet off the ground the drone started throwing off propeller blades due to the imbalance one of the blades must have hit the other side and broke off two blades on the other rear propeller with two rear propellers disabled the front of the drone came up and I flew backwards and hit the ground and popped my battery out. When I took the rear blades off I found a little piece of plastic in the motor so I picked it out it was one of the three clip that holds the propeller to the motor. If. I didn't install the strengthening rods from the front arms too the rear. The rear two arms would've been broken off it did break one rod & scuffed the other so I took them off and ordered two more for $15 it was well worth it 😉👍🏻 I must admit the Chinese did a great job with the DJI FPV 👍🏻✨drone it held up under the crash💥
Once in manual mode, you have to tap the right/front button to arm it (not down and in with the sticks) and then it takes off like any other FPV quad. Take off in manual is easy, landing can be bouncy!
NO! My ludicrous plus propeller exploded and crashed my brand new DJI fpv on third flight. Maybe try the softer bendable ones but do not get the ludicrous plus
Are you sure you installed correctly??? I've only seen this happen when people mix-match the props with their corresponding motors.. automatic catastrophic failure... The same goes with any props.
Agreed that the DJI FPV is not easy to land smoothly - especially in acro mode. I usually switch mine to normal mode and let it land on it's own! I'd be interested to see how you hand catch it.
Fpv mini 3?? Never heard of it. I’ve seen the mini 3 pro but not an fpv version. Can you fly or manual or no? Can’t find any info about it. You have a link?
Not on the DJI FPV drone. The props Master Airscrew makes for camera drones, like the Mavic, etc., are quieter, but on the DJI FPV drone, they seem to be just as loud as DJI's.
Agreed that is may be a simplified explanation, but it is how props for aircraft and boats are marked - 4 numbers - first 2 are the diameter and second 2 represent movement per rotation. But I agree that there is more to it than what I said.
@@readysetdrone It's not easy to explain that's for sure. If your propellor were to be a nut on a bolt for example, the pitchnumber would indeed relate to the up- or downward movement per rotation. In air (or water for that matter) it's a completely different situation. The amount of lift per rotation depends both on the density of the material the propellor is cutting through and the speed of the prop. And then there's also this thing called gravity that plays a big part.
I worried about that as well, so I emailed DJI support and here is their reply: "...the use of third-party propellers has no effect on the eligibility of the DJI Care Refresh..." That was good to know!
most people install them wrong not realizing the red colored motors should match with the props labeled with a white circle.. if you install wrong they can not just "explode" but you will most certainly crash.. this is the same for the original props too the only difference is the white circle is red, just like the corresponding motors, to help the newbies figure it out.. yet people still mess up.
Had a catastrophic failure flying over a lake with the green ones! One of the props flew completely apart while I was flying in normal mode at about 30mph. My friend told me it looked like my drone exploded instantly in mid air. Luckily, it landed within about 50’ of the bank, but it took four of us over an hour to find it. All Master Airscrew did was deny any fault. They look really cool, but unless you’re just wanting to sit your drone on a shelf and look at it, I would stay as far away from these props as possible! (There’s also a video on youtube of another pilot who experienced the exact same thing.) It shows the drone bust apart and fall to the ground. Same props!
ruclips.net/user/shortsOUNl2EUxNns?si=LEu-XiWKV-7rAYzP
If I ever happen to get the DJI FPV, I’ll have to get the MAS props for sure.
I've been using these master props for a couple of weeks now and can say they are definitely an upgrade 👍. faster and smoother and seem to be getting a little more flight time... I got the blue and orange and yeah they look way cooler than standard... I would definitely recommend them although a little pricey
Totally agree!
Aikon adapters are the way to go 🙃
Howdy Kelly. Thank you for this excellent review of the Master Airscrew Props for the DJI FPV. Yes, I have been a big fan of Master Airscrew Pops, too, ever since purchasing them for my Mavic Pro. I've gotten longer flight time and quieter flight noise levels. I have an order in for their DJI Air2 Props now that they have solved the vibration problem. Thank you for this video review and your interview with Master Airscrew CEO Boris Iskrev; both were well produced and informative.
Thanks Steve. The MA props definitely give some small upgrades and make whichever drone you put them on look much cooler. Also - thank you for the stickers! I put one on my laptop - front and center! Take care!
Looks super cool
I know this videos little older but I was wondering if those ludicrous props help with the prop wash in normal and sport mode
I love the way they sound. They scream. One major con is voided warranty. In flight, mine made a gear stripping sound right before falling out of the air. DJI told me the 3rd party props caused my fpv to over perform and break. So I had to bust out $250 to refresh and ever since I’ve been back to stock props
Yeah, that's a shame. I actually emailed DJI support and got a reply back clearly stating that 3rd party props have no impact on the eligibly of DJI Care refresh. Then, being pleasantly surprised, I tweeted about it, with screen shots from the email from DJI. Then the DJI Twitter account replied, basically saying that employee who responded to me was wrong. 😕
Kind of makes sense, but at the same time, if I do something foolish like just drop it as I'm getting out of my car, why isn't putting 3rd party props also considered "accidentally damage"?
If you're under that warranty still, it does make sense to use stock props, as you mentioned. 👍
That’s amazing
Yes sir, I got 3 sets and I almost forgot they not the original, they firm , give the drone that firm feeling, I would definitely recommend them , yes sir🚀
Just grabbed me a set for me DJI FPV.
Given the dimensions of the new props...They will be grippier and faster however that will cause less efficiency along with the increased weight. It will be preference in the end.
Got mine and tested them out. Definitely more aggressive pitch and louder noise factor but I don't really see any power advantages or punch-out increase. I thought the bright red would be easier to spot but they aren't. With increased structural rigidity over DJI OEM props I do expect these to be more durable hitting leaves and branches but only time will tell. I can tell you that when I launch from my back porch the new blades clear every spec of dirt and leaves from concrete and send ants flying. This beats sweeping. 😄
Who knew that drones are great for back yard cleaning! Ha ha
Thanks for showing normal mode as well, I was wondering how the AI would handle it. Great video!
Glad I could help!
thank you
Have you tried the prop adapters yet? I know it's more weight centralized on the motor but if you're running a 5'1 pitch 3 that only weighs like 3.5 g it should in theory spin up a little quicker maybe? And it be nice if someone with a good RUclips channel like yourself did a 2022 review because I can see now you can get parts readily available and there's repair channels dedicated to disassembling this drone and repairing it.
I have just put those on mine. I like them but I would like to see a wider led version for night flight. Bright color for the day.
As always, awesome review! Thanks for sharing your thoguths Kelly!
Great video Kelly. I always enjoy your content.
Loved them on my mavric air and mini. In my dji fpv one gave way crashing my drone. Like to upload video but not sure how
Thank you Kelly
I would stay away from them. I got a red set (if it matters or not) when I start the motor 3/5 times it would think there is a prop guard and it would lower the performance of the drone. There are quite of people also saying the same on the Amazon reviews.
Yes! Same here !
Interesting. I'm not sure what you mean about "think there is a prop guard". Can you explain in more detail? Or post a video of what's happening. I'd really like to see it and see if I can figure out what's going on. Thanks for watching and for the comment!
@@readysetdrone I'm getting the same warning, "Prop Guards Detected". I had even sent back the first two sets (red &orange) at the request of Master Airscreww, and they sent me two more sets to test. I got the same result. I did not find it was lowering performance that I could see, but this is a very curious phenomenon. I don't quite know what to think about it... How would the drone think there were prop guards on?... I'm still flying with the new props anyway without problems, and they do look very cool.
I've never seen that warning before, even with other third party props. That's strange, to say the least! Does the warning appear right away after take off?
@@readysetdrone it happens when you fly in normal and sport mode.
Om jeaulous how good you can fly, i have the avata and the FPV but i need to use b3ond to encryse the range, any other tip to encryse the range
You might be on CE instead of FCC
Not worth it. Extremely brittle. Had a catastrophic failure of a prop doing a long sweeping left turn in an open area. Blades completely snapped off at the base.
Great Review Kelly. Very Interesting. Thank You.
Thanks for watching!
I installed master air screws on my drone & got screwed one of the three holding clips that hold the propeller to the motor cracked. I felt a shutter 200 feet up so I slowly flew back to my takeoff point knowing something was wrong & hovered at about one and a half feet off the ground the drone started throwing off propeller blades due to the imbalance one of the blades must have hit the other side and broke off two blades on the other rear propeller with two rear propellers disabled the front of the drone came up and I flew backwards and hit the ground and popped my battery out. When I took the rear blades off I found a little piece of plastic in the motor so I picked it out it was one of the three clip that holds the propeller to the motor. If. I didn't install the strengthening rods from the front arms too the rear. The rear two arms would've been broken off it did break one rod & scuffed the other so I took them off and ordered two more for $15 it was well worth it 😉👍🏻 I must admit the Chinese did a great job with the DJI FPV 👍🏻✨drone it held up under the crash💥
What a story! Thanks for sharing.
Are these the same as the Master Airscrew Ludicrous dji fpv drone props?
Hey man, how do you take off in manual mode? Does it also bounce around like it does when landing? Thanks.
Once in manual mode, you have to tap the right/front button to arm it (not down and in with the sticks) and then it takes off like any other FPV quad. Take off in manual is easy, landing can be bouncy!
Look for my comment on how to make those MAS props into those cases. Photos included in the review
Great as always. Nice review.
I appreciate that
NO! My ludicrous plus propeller exploded and crashed my brand new DJI fpv on third flight. Maybe try the softer bendable ones but do not get the ludicrous plus
Wow! Good to know. I believe these ones I have are not the Plus version. Sorry that happened to you!
@@readysetdrone yea the plus version is clear colored and stiffer material. I will be doing a review with flight recording.
Are you sure you installed correctly??? I've only seen this happen when people mix-match the props with their corresponding motors.. automatic catastrophic failure... The same goes with any props.
Bonjournice to meet you~thaanks~this is breathtaking video.farewell~:)
Glad you enjoyed it
What is your setting to get it to fly so fast?
I purchased these and noticed a difference in performance, but also durability. They are more rigid and snap easier so be careful.
Thanks for letting me know about the disability. 👊
I got mine a month ago! I have a good vid on hand catching how to. I don't like landing mine on the ground
Agreed that the DJI FPV is not easy to land smoothly - especially in acro mode. I usually switch mine to normal mode and let it land on it's own! I'd be interested to see how you hand catch it.
@@readysetdrone
On my site there's a video that simply is titled handcatch where I go over launching and catching.
Nice,.drone fpv camera,.how long.....
A lot
great I want to buy fvp mini3 soon🤩
You should!
Fpv mini 3?? Never heard of it. I’ve seen the mini 3 pro but not an fpv version. Can you fly or manual or no? Can’t find any info about it. You have a link?
Does it make it a little quieter ?
Not on the DJI FPV drone. The props Master Airscrew makes for camera drones, like the Mavic, etc., are quieter, but on the DJI FPV drone, they seem to be just as loud as DJI's.
Nice...
Thank you! Cheers!
They break easily broke mine in the first flight with them not a hard crash either
The amount of pitch is not the same as the distance travelled in one rotation. That's not exactly how that works
I'm sure it's complex, but that's how I've seen it explained by multiple sources online. How would you have said it?
Agreed that is may be a simplified explanation, but it is how props for aircraft and boats are marked - 4 numbers - first 2 are the diameter and second 2 represent movement per rotation. But I agree that there is more to it than what I said.
@@readysetdrone It's not easy to explain that's for sure.
If your propellor were to be a nut on a bolt for example, the pitchnumber would indeed relate to the up- or downward movement per rotation.
In air (or water for that matter) it's a completely different situation. The amount of lift per rotation depends both on the density of the material the propellor is cutting through and the speed of the prop.
And then there's also this thing called gravity that plays a big part.
Hmm you say you didn't notice much difference to second's later bless them to the sky? Feels a little bit weird?
much and none at all are two different things.
I love mine it's all I use
Awesome! I had another comment about durability issues. Have you had any crashes yet?
No not yet , I'm sure they would hold up alot better than what comes with the unit
First air2 s army out
You roll the dice with them, and their customer service. DJis arnt always friendly to aftermarket propellers. Malfunctions will happen
I worried about that as well, so I emailed DJI support and here is their reply:
"...the use of third-party propellers has no effect on the eligibility of the DJI Care Refresh..."
That was good to know!
I heard they explode 💥 in mid-air 😮 😱. I hope 🙏 not
most people install them wrong not realizing the red colored motors should match with the props labeled with a white circle.. if you install wrong they can not just "explode" but you will most certainly crash.. this is the same for the original props too the only difference is the white circle is red, just like the corresponding motors, to help the newbies figure it out.. yet people still mess up.
@@BooFPV if you install them wrong it will crash on takeoff and you won't make it to mid-air
Almost first
Mike is too quick! He's usually first. 😅
good video thank you, I liked, I will be glad to see you on my youtube channel