Это видео недоступно.
Сожалеем об этом.
Facelifting my Supercharged 2014 Raptor - Gen 1 ➡ Gen 2 Front End Conversion
HTML-код
- Опубликовано: 21 окт 2020
- In today's episode were facelifting my Ford Raptor
Head to bisforbuild.com for merch!
❱ Shop - bisforbuild.com/
❱ Patreon - www.patreon.com...
❱ Facebook - / bisforbuild
❱ Instagram - / bisforbuild
❱ Twitch - / bisforbuild
Music:
Fareoh - Cloud Ten
that gray would look so good as the new color 👀
And would actually be cheaper than blue paint 👀
YES, this 👆
Lead Foot. I have an 18 Raptor, same color
Yes gray would be a much better colour 👍 come Chris do it 😬
You beat me to it, definitely a more modern colour, why face lift it but not face lift the colour 👍🏻
next on the list should be a cement driveway to the shop and a car port. why work on dirt and leafs.
“What’s it like being a car guy?”
“Well my headlight didn’t work well so I replaced the whole front end of my truck with a newer front end” 😂❤️
And the headlights still not working😂
🤣🤣🤣🤣
When something breaks we just see it as a chance to upgrade!
Oscar is such an amazing fabricator, he makes it seem like anything can be build by hand.
I love the gray! Repaint the rest of the truck
I agree.. paint the truck gray!
RAPTOR it gray!
That's one nasty air filter under the hood. You should replace that to help the supercharger.
Came here to post this
Yes, please! for the love of all that is breathing, replacing that nasty-ass air filter!
When are we getting the "Oscar did a great job" shirt
You win the internet today... Here is your trophy... an Oscar!
There's an MVP Oscar shirt
I’d buy that
Ill order the one that says. Im fucked without oscar. Hhaa
O is for Oscar !!!😀
I think they should make the whole truck that grey colour it’s really nice
YESSSSSS, with the blue racing stripes
*he
Lead foot grey right?
@@Captaindan7141 Correct sir, it's definitely pretty in person.
I agree
The grill vents are active for heating, cooling, and mpg. People that know will trip when they see the 2nd gen front end with that 6.2L badge. Clean that filter, paint it grey
More than the badge. The exterior door handles are very different on gen 2
Yep a satin grey
1:50 To answer Chris, yes, someone already did it and they sell a kit for it with custom made fenders to fit better, the company that does it is called Fiberwerx, but it's expensive, i kinda like more the DIY version of B is for Build! 😂
lots of people do it, for rangers too.
Who needs a kit when you got an Oscar.
Makes an ugly truck more ugly
May as well just buy a similar mile gen 2 raptor.
DYI....Do Yourself It......mkay
After watching this video, you guy inspired me to throw my oil pan and a few other car parts in my oven. My wife just loved it. She cried with joy. Keep show other ideas for the washing machine....
Florescent lights in the microwave are fun
Maybe buy a pin extractor kit so you can use the original connectors and re-pin them
He doesn’t have the original male connector
Real ogs will remember when he tried a long time ago
I only was here from the 1jz brz.
@@jeantsaiaviation awesome
Been here since he lowered the camaro
Been here since he rebuilt that brz under a 10x10 tent😂
Been here since the original boat car.. and twin turbo mustang
Chris, long time fan here, I know it's a lot of work but i'd love to see that truck painted grey! I'd happily let it run over a few extra episodes to get it done.
Jesus Christ man...B is for buy a new air filter lol or at least clean it..
Should paint the back to match the front dude
They probably already got blue paint
Should paint the front to match the back dude
I’d love to see another color entirely, something more custom
@@chrisdionne11 Yea Pink lol
@@Oscar_SMT ok lets settle on all 1 color perriwinkle
On lord, clean that k&n filter lol
Have you thought about painting the truck the same color as the front end ? It will give it nice fresh and more modern look.
B is for Build: it is just brackets
Bad Obsession Motorsport: breathing intensify
13:15 "we're not fancy like that."
*Has dyno*
"I can't have any risk of unreliability on this thing"
I think that ship sailed when you bought a Ford Raptor to use as a work truck. ;)
Don't get me wrong, I LOVE Raptors and it is what brought me to your channel, but one thing a Raptor will never be is a reliable workhorse. ;)
and it has roush SC to boot!
That metallic grinding noise sounds like one of the hydraulic lines behind the front wheel. Mine was on the passenger side, the tire wore a hole in the hydraulic line for the 4WD system, sounded exactly the same.
1) Repaint the truck, the gray is awesome! 2) Replace and probably relocate the airfilter, it's filthy and with the new hood it could probably do with a relocation. 3) Fully service the truck, new filters ect.
Thanks for a great show guys!
Great work guys!
I like the change if pace when you do the boat stuff, but god i love it when you guys get back to this kinda stuff. This is my favourite channel without doubt. 😀😄😜Peace👍🏻
What about the single seater 😐
i think he said he was sidelining it a few videos back because sema was cancelled.
@@SirSmilie oh that makes sense. Still, just for the channel, it would be entertaining at least imho
Why would he stop building it though? I was looking forward to that build.
Chris reply to me on Instagram when I asked the same question about the single seater because the boats out of the water is extremely expensive to keep the boat out of the water so they’re jumping on getting the boat sorted and then back on with a single seater hope this helps :-) we have some car builds on our channel if you want to check that out
Single seater?? What about the bloody supra!!
That grey looks so good!
That grey looks so nice. Gives the truck a sleek look.
The things Oscar can do with just some sheet metal it’s honestly mesmerizing an he is so consistent in every video with his metal work
Paint the rest of the truck the same dope grey color! 👍🏻
Paint the rest of it grey like the front
I agree the gray is a super cool color, if anyone knows the paint code for the gray that would be great.
I believe thats battleship gray
I was about to say the same thing. That grey is awesome
we've got enough grayscale cars on the road already
Mannuel Baidya i think thats a "lead foot grey"
Paint the truck to match the new parts. Love the cement grey color.
I love how you guys approach these things, its like the best form of engineering, start working and solve the most prominent problems and resolve everything else around it. I love it as a software engineer I can really appreciate your problem solving skills as much as any of the fabrication skills. Y'all are great!!
“ Don’t, don’t look at the junk pile!! It’s for a “Special” project “ .....😎
Maybe a junk race car 🤔
That air filter though!
I haven't watched the whole video yet, but the "lies" and "not true" spam on the screen is exactly why I watch this channel. Thank you for having my humor I love you
Is it driving anybody else crazy that Chris didn't wash that exposed front end before the install?!
paint it all gray
air cleaner needed to be cleaned or replaced.Not doing so puts more strain on bearings and bushings.
Props to you for actually doing it right and making it look good. Most conversions look like earl next door did it.
This is the type of content I love on this channel. Attainable vehicles with cool documentation on how the mods and fixes are done.
this truck is everything that the 2017 raptor should’ve been
Should have been v8 and supercharger
V6 just sounds as vacuum cleaner
@@manganvbg90 I actually quite like the sound of the V6. As long as it has the right exhaust & turbo setup.
@@shona5512 all to their own. But ofc a tt v6 is better than an electric raptor 😂
“Don’t look at this junk pile” why? Because you just casually have a Murcielago wheel chilling in that “pile of junk”? Haha
This Raptor is going to be sick! I am super excited for it to be completed. It’s my second favorite build, my first favorite is the Burntacan! That lambo is sexy AF, I am just in love with how it looks.
Please tell me you are painting the rest of the truck "Lead Foot"
Repaint the blue to the grey colour?
Yes i was thinking the primer gray looks great on it.
Chris paint the entire truck grey!!! will totally look like a new ride!!!
What a project! My hat's off to the owner/builder.
Paint the whole truck gray!! Give it full love!
Came for the boat... stayed for the cars. 🤘🏻
Couldn't you have 3d printed the conectors for the headlights?
The files are not open source. This would take a lot of guess and check to make it work. It’s not worth it.
Thanks for the upload man i needed the serotonin and distraction 🙏
Oscar is a master craftsmen! What skills! He makes it look easy, but it’s got to be incredibly complex.
Ive been waiting for this, for so long. I remember the episode where you talked about facelifting the truck after buying 2.gen style lights
I absolutely recommend upgrading to the Morimoto XB headlights if you can make the wiring work. I installed them in my 2018 F150 and simultaneously got more than double the light output and half the amount of people flashing me because the beam pattern is waaayyy better. I work nights and now I can actually see where I'm going.
I used to work for an aerospace company and we used the same trick on some bearings. We would dip them in liquid nitrogen, then tap them into place
It’s a AGS. Active grille shutter. Dodge does it too. If you remove it your truck will run way cooler. But you might also throw a check engine code and your rad fan will run constantly as a result of the ags unplugged
Thinking aloud- when making your own pigtail, instead of epoxying a "permanent" plug, could you 3D print a plug, wrap it in a gasket material so it's removable like an OEM pigtail? Dunno - just problem solving someone else's projects...lol
what's the potential for doing a rear end conversion as well? (bed, tailgate, bumper, lights, etc.)
I think it'd be easier just to take a 2nd gen Raptor and engine swap it😂
@@ramses_jose6303 indeed
@@ramses_jose6303 Or just buy a 5.0 truck and throw a blower and body panels on it lol
@@ramses_jose6303 swap it with a LS and make a real truck out of it
May as well just buy a gen 2, swapping a front and rear end costs so much that it's not worth it
B IS DOING IT!!! I’ve been looking forward to this video since you said, “maybe we’ll facelift it...”
Something to look into is finding a company that can 3d print you custom connectors. Using cad you can make any small plastic parts. I recently printed some battery caps for an old Lucas battery from the 50's.
Chris: "I want safe and reliable vehicle"
Also Chris: *cuts half of the hood structure*
Waited midnight for this episode. Lol addictive content 🥳
Even me bro
Just for future reference, they do sell the pigtail connectors at the dealership fairly cheap. Just makes life a little easier!!!
Man I work at a Ford dealer and I would definitely send you some oem pigtails so you don’t have to epoxy bare pins to your quite expensive headlight lol
God that sentence “so we will solve that solution” was brilliant
When you said oven I ddnt think you meant a literal oven where you bake 😂
@@AMLagonda for the same reason when a car is done getting painted and they let it bake in the oven or sun they don’t use a house oven.thought booth not a oven cooker.
Definitely doesn’t make any sense
To you
Chris is sounds like the scratching noise your talking about might be the IWE / Vacuum Hub. It’s an identical noise to what I just had to replace on my svt.
You should think about marketing a set of brackets for this conversion. Great video.
If I had to hack those pieces to shreds I wouldn’t put them on your truck!! When you drive down the street everything going to move around. You are lucky to have such a good friend Oscar to help you. Dam he does good work!
Oscar has great skills
It's amazing to watch his thought process.
Did he come from a family of fabricators?
Its clear that he sees the end result when he starts.
Thanks. My dad was a machinist for over 20 years, Iv been a fabricator/ iron worker for over 12.
All the colours are awesome, the gen 1 body is way cooler than the second body style. Good luck,, have fun Offroad
love it! coudv atleast let us hear the charger sound after the rebuild 😅
Ya! Change Your Air Filter!!!!
Go with the Grey!
Love how you guys jump into anything and make it work. Raptor looks great👍👍
the grill is a technology called AGS, active grill shutters. It's only for the purpose of aerodynamic drag reduction.
E is for early
I’ve just been waiting for rebuilding my import Supra
I think its stored somewhere due to covid but once he gets it the build should start pretty soon after I think dont quote me
Oscar is a beast, I would love to see Chris do something major. Im sure he probably already does behind the scenes but im sure all the fans would like to see something cool. Something that isn't a project for him to do.
PEEP that Aston Martin in the background 👀👀
It looks pretty slick man always loved clean facelifts
Also im wondering what they'll do if the engine gives out keep it or nah?
I was debating or thinking if I could do this to my first GEN Toyota tundra
Nothing will make that truck look better tho :(
@@Manuel-xy7un facts
to a 3rd GEN 2014+?
or 2007-13 2 gen?
I've seen plenty of 2nd to 3rd gen conversions
New BMW M4 too xD
A Raptor front end on a Tundra would probably look a little off :p
I love the fact that you and the team will attack these projects. Truly raises our confidence level
@bisforbuild the flaps in the grill are for areo on the highway, they close for more MPG
It would be cool if they had been able to put them on a little servo with a relay to a bomber switch "aero mode."
Make the whole truck Nardo Grey
Any updates on the supra build?
I think its stored somewhere due to covid but once he gets it the build should start pretty soon after I think dont quote me lol🙂
@@maverick13k57 yeah or something something 25 year rule? didnt they make the supra till like 2002?
@@ZackNakazora1 ???
@@maverick13k57 dang covid 🥺💔
@@ZackNakazora1 i think his supra is already 25 years old
Love this channel I was a body man for macco paint and body shop and had to fabricate every thing
The worlds most complicated headlight system, made even more complicated by B is for Build. Seriously the 2017 OEM headlight and grille assembly is so complicated (you basically have to disassemble half the grille to change a bulb) I’m impressed you managed to make it all work.
Do some M is for motorcycles content
Yesssss
O is for Organ Donor
I rmember a long time ago he wanted to get a zx6r
@@MX304 cars are the main reason people on motorcycles die tho 🧐
Nooo
i dont think that was paint, looked like a mosquito from where im sitting.
You can buy the proper headlight connectors from Mouser. I did it for my Jeep headlight upgrade so I could have the Led DRL factory headlights and also did the same for my Durango for the same reason, allows you to not destroy the lights.
Great Job can’t wait for the paint, a lot of people are going to be confused after seeing it, but that’s B is for build. Great Video ✌🏽
"Simple bolt on face lift" LIES LIES LIAR
Love the Chanel an all the content, lol but we all know when he says “did some quick measurements an it looks like it will fit” that it’s not. Hey but love your Chanel an everything you do
The electrical work on this episode makes everyone cry. Yes, even babies.
You guys are True Masters of body work.
Single seater has left the chat😐😐
Right...😒
He did a poll to see what to do about it, and i belive that the option that one is for making it for sema 2021
Sad it went to wayside! I was really looking forward to it.
I remember the first vid i watched and i was sold the first 15 min, and i was not a car guy lol
Dintsang dar
Got to love a bit of BOM CAD, cardboard aided design happening.
This is on my to do list. I want to update the front end of my Excursion to a 2018 style front end. Right after I finish the Cummins swap! Great Vid!!!