What a great video to show the ease of simultaneous 5 axis through fusion. I’ve used powermill and featurecam and always thought fusion was the weakest when it comes to toolpaths, I will have to give it a try after watching this. 👍🏻
This is interesting. On the part I'm currently working on (On the Mazak Integrex) I have a Key projecting into the bore on one end. I order to reach it I will need to tilt the B axis to get a 1/16" ball mill into the corners. This may work. I don't as of yet have a functional post. But if I can post the code for just the tool path I can manually insert it into the program made by Esprit. The Esprit software believe it or not is not as good as Fusion's ability when it comes to this kind of thing. This is one reason I would like to get Fusion to work for the Mazak Integrex.
very interesting to see a very knowlegable man like you still watching videos and learning from them a true example of the no limit for learning and no particular source for it
@@EdgePrecision my words can't describe the great feelings that I had when you replied me it is facinating to be replied by a great man that I respect thank you so much bith for the amazing amount of knowledge that you share
On this subject for those who use Mastercam I had always checked the box "make all rapid moves feed moves" then I would make the feed 500 ipm. That way the machines I ran would use deceleration and they would have a smooth movement like gliding.
Thanks for the tips. was just messing around with 5 axis in simulation and couldn't get it to do anything I wanted. Have you ever tried Autodesk Feature Mill? If it does what it says it could really speed up programing time.
Hi,you could try setting the tool sweap angle to something really big like 45-90 degree,it makes the linking moves nice and smooth. Thnx for doing alot of interesting videos :)
How do you measure the tool stickout? Do you do that manually, and if so, what setup do you use? Alternatively, do you measure based on theoretical/given values from the manufacturer? Thanks!
Just from an education standpoint... You didn't really show it working faster with the new smoother way side by side... Just to drive it all home. Thanks for great thoughts and ideas
I'm always thankful that even your business grew a lot you still are sharing your knowledge. Thank you!
when john is excited his own body start moving in 5 axes
This is pure enjoyment and education. Could not ask to be better.
More 5 axis tutorials please!!!
In mastercam adjusting the tolerace helps. Also use smoothing setting and arcs work faster than tons of xy moves
What a great video to show the ease of simultaneous 5 axis through fusion. I’ve used powermill and featurecam and always thought fusion was the weakest when it comes to toolpaths, I will have to give it a try after watching this. 👍🏻
Thanks for this post. We are new to five axis simultaneous machining with Fusion 360 and this will help a lot.
This is interesting. On the part I'm currently working on (On the Mazak Integrex) I have a Key projecting into the bore on one end. I order to reach it I will need to tilt the B axis to get a 1/16" ball mill into the corners. This may work. I don't as of yet have a functional post. But if I can post the code for just the tool path I can manually insert it into the program made by Esprit. The Esprit software believe it or not is not as good as Fusion's ability when it comes to this kind of thing. This is one reason I would like to get Fusion to work for the Mazak Integrex.
Knowing you, it's probably Inconel :)
@@nyccnc Titanium.
very interesting to see a very knowlegable man like you still watching videos and learning from them a true example of the no limit for learning and no particular source for it
@@marouanebenderradji137 John is much better at Fusion than I am. So I do learn from his videos.
@@EdgePrecision my words can't describe the great feelings that I had when you replied me it is facinating to be replied by a great man that I respect thank you so much bith for the amazing amount of knowledge that you share
Such small details explained so simply. Not easy, well done.
Awesome video, I just wish someone would do a video this awesome for Camworks.
Excellent!
ATB, Robin
Incredible video, really awesome.
Thanks!
Once again John...you saved me! Would love to come to Ohio for a class
Great stuff.
Thanks for sharing this!
Interesting the more moves smoothed it up but it didn't really seem to slow it down.
On this subject for those who use Mastercam I had always checked the box "make all rapid moves feed moves" then I would make the feed 500 ipm. That way the machines I ran would use deceleration and they would have a smooth movement like gliding.
Thanks for the tips. was just messing around with 5 axis in simulation and couldn't get it to do anything I wanted. Have you ever tried Autodesk Feature Mill? If it does what it says it could really speed up programing time.
Hi,you could try setting the tool sweap angle to something really big like 45-90 degree,it makes the linking moves nice and smooth. Thnx for doing alot of interesting videos :)
Forgot to mention that swarf with a forced tilting angle usually gives a nice toolpath.
Generative design work as per metal plastic slip line theory and redistributes material according to shear stress flow of the part.
would love to get a 5 axis machine but don't see it happening any time soon:)
Nice video
Im going home to download fusion 360 right when i get out of work its time
No 'porting' toolpaths in fusion? Or ability to align tool vector through a point or curve?
GARRETT LEWIS Nope, not yet anyways
How or where do you get the job orders that you manufacture?
How do you measure the tool stickout? Do you do that manually, and if so, what setup do you use? Alternatively, do you measure based on theoretical/given values from the manufacturer? Thanks!
0:01 - intense jump-cut, tho
Hallo,welche Art von software erhalten sie in einem Fünf Achsen_Programm?
Welche software eignet sich am besten Für Fünf Achsen _programm? Danke
Just from an education standpoint... You didn't really show it working faster with the new smoother way side by side... Just to drive it all home. Thanks for great thoughts and ideas
Hello
Hallo,aus welchem land kommst du?
5:10 the answer
Great! Now just to get such a machine... in my shed... maybe get a second mortgage on my house.
hi there.
hello how are you doing
Good thanks
Weak