HOW TO Fix Vector Errors in Carveco

💎SpeTool Bits ➤ spetools.com/?ref=SALE
ADD coupon code "𝐒𝐀𝐋𝐄" at checkout to get an extra 16% discount on your order!
👇 helpful links! 👇
#cncrouter #cnc #howto​​
#Affiliate links fund the channel; paying for software, recording equipment, bits and other shop tools ALL without costing you anything extra & I'm usually able to swing the best discounts for you too!
🟢𝐆𝐨-𝐓𝐨 𝐁𝐮𝐝𝐠𝐞𝐭 𝐟𝐫𝐢𝐞𝐧𝐝𝐥𝐲 𝐁𝐈𝐓𝐒: amzn.to/3bOoE1z​ ​ & amzn.to/3b2gvax
🟢𝐂𝐚𝐫𝐯𝐞𝐜𝐨 𝐌𝐚𝐤𝐞𝐫 𝐅𝐑𝐄𝐄 𝟗𝟎-𝐝𝐚𝐲 𝐭𝐫𝐢𝐚𝐥:
store-us.carveco.com/products...
Use coupon code "𝐒𝐀𝐋𝐄" at checkout to give me credit on your free trial, and if you decide to keep using the software after the trial expires you'll get a 5% discount attached to your account going forward! So if you ever decide to upgrade or purchase the software outright, you still get the discount!
🔴 Have you Subscribed yet???? Subscribe NOW to catch our future videos Click Here: bit.ly/3rbJPRL
Two methods for fixing vector intersections in Carveco ( formerly ArtCAM ) I prefer the bitmap fill method whenever the design elements can accommodate a slight change in size. There is actually a third method that I use fairly often: creating an offset with a very tiny distance set, this often fixed overlaps and open vector issues. Thanks for checking out this Carveco Tutorial and I hope I was able to share a new option with you that can make Carveco toolpath generation just a little bit quicker for you. See Ya next time!
-------------------------------SOCIAL-------------------------------
👥Facebook: HisNHersHandcrafted
📸Instagram: hisnhershandcrafted
📝Our Digital SVG Stockpile: hisnhershandcrafted.myshopify.com/collections/digital-downloads
🛍️Our Home Decor Product Shop: hisnhershandcrafted.myshopify.com
Music: jaricomusic Jarico - Weekend

[@SethCNC]

Do you have your own tricks for fixing these hard stop vector issues within carveco? Share your tricks too!

[@infinitig5392]

thanks ! added to my arsenal of How Tos.

[@douggreen1283]

This is a life saver! I was struggling with this for awhile. Thank you!!

[@lukaspotgieter7363]

Now I learned a lot in a few minutes.Awesome!

[@mickp]

Good video. Thanks. When you use the trim tool could you not use the Auto Join check box. Not sure if it would save any steps.

[@SethCNC]

Good point, that would have removed the merging process 👍

[@johndiego3105]

Does the free trail include the foxalien 4040xe

[@SethCNC]

Free 90 day trial is the same as the paid version, so yes, use "grbl" post processor for your foxalien cnc 👍