The "Race" Ski Daddler Part II. Fixing Chassis Issues! Vintage one lung snowmobile race prep.
HTML-код
- Опубликовано: 8 фев 2025
- I fix the problems we found in part one. That motor mount bolt was fun...
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2v...
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop
As soon as I saw the welding wire, I thought of the trailer hitch kits too. I've used that one a few times myself as well!
Hey Hey buddy!!! Enjoying seeing something different! Dental floss or fishing line works great too 👍
How come no friends for shop night? lol
Cheers Nutter 🍻
They are a labor of love bud. 👍🏻
Sure is Seth!
@@nuttersspeedshop where are you located?
Forest Lake area.
@@nuttersspeedshop I may have to come and visit sometime.
Nice, I have had to fish bolts like that. Though my S10 has a small slot cut in the K member so I could push a mount bolt through without dropping the whole lower A arm. Now out to the garage to pull a Rotax flywheel and fan housing to replace a bearing so I can take the entire fan housing in a suitcase on a hunting trip to install on a Oly in the shed so it's good to go in late January.
We're thinking about the Tamarack ride instead of the ride in at ERX this year.
Those old ones and some of the newer ones will teach you patience. Great project.
Yes they do
Lol now I got to the part where you did use the open wrench
Yeah, bolt was too long for socket all the way.
Why didn't you hold the top of the bolt and use an open end wrench to tighten it ?
Thanks for the video as usual nutter, winter is just around the corner!
Nice work. John where do you get those timkin's? Another great bearing is the blue seal NTN Formula's.
Got them from Amazon.
Tack wire on tip of bolt?
Dental floss