Water Surface - TOUCHDESIGNER TUTORIAL #1 - Français & English Subtitles
HTML-код
- Опубликовано: 2 окт 2024
- Welcome to this first tutorial! I hope my explanations are clear enough, don't hesitate to give me any advice!
As I say in the video, this network is a base and is destined to be improved, or even used in other networks.
Share with me your creations, your modifications, ideas, etc. :)
You can contact me directly on Instagram if you want!
/ sarv.live
Have a good day ♥
Ravie d'avoir trouvé des tutos ENFIN en français ! Merci beaucoup !!!! 🥰
@@marienara je vais tenter d'en faire d'autres bientôt ! Avec plaisir ! 😘
mais oui il y a des Français aussi qui s'intéressent a TD, merci
@@sebastiencarmona6563 oui il faut développer la communauté francophone !
Merci pour le tuto en francais !!!!!
Very nice. At 20:30 you can shuffle inside of the topto-CHOP = output as single channel set. But this is some good advice on water surfaces. I tried water for a long time now, but I never came up with those ideas. Thank you so much
Hi Markus !
Didn't know for the ToptoChop "Ouput as single channel set" parameter ! Thank you for this !
And thank you for this comment ! :)
je t'en supplie fais un tuto pour le visualizer "dimensional cube"
Francais !!!
Oui Monsieur !
Awesome!
Nice work!
Thank you
Dingue
love this method!
@@LukeHildreth thank you!
Les français sont là !!
Oui Monsieur !!!
thank uuuuuuu
You're welcome
Merci pour le tuto ! 🙏🏻👌🏻
Avec plaisir ! 😌
trop bien !!!
oui trop bien je vais pouvoir regarde ce tuto , mis en playlist :)
N'hésite pas à faire un retour sur ce que tu as aimé et les améliorations possibles ;)
hank you for your video, but when exporting the movie to Mp4 video format, the water flow runs very fast. Can you take some time to guide me on which tool to use to adjust the flow speed to run as fast or slow as desired? (Because I'm new to self-study, I don't really understand). Thanks a lot. Hope you have time to make each instructional video for those who don't know anything about Touchdesiger.
Hi !
I'm actually not at home so I will answer to you soon ! But for now, check if the fps rate at the bottom left corner of TouchDesigner is the same as set in the "movie file out" node. Try as well to change the phase in the Ramp TOP, try absTime.seconds*0.1 or *0.01
Dm me on Instagram or mail if it doesn't work !
@@sarv.live7 Thank you very much, I did it by increasing it to 0.01. Hope you have plenty of time to compile a series of basic instructions on Chop for beginners.
💥👍
:)
thank you! super helpfull!!!!
♥
Alt N le shotcut pour les nul(l)s :)
Sarcasme et amour uniquement
@@5thfloorprod Hahaha merci! 😂
one of the clearest tutorials i've seen. thank you!:)
@@boniffacy2046 thank you so much for this comment!
franchement magnifique, j'ai beaucoup aimé tu prends le temps de bien expliqué le coté traitement d'image (passage de pixel matrice etc...) que je pensais avoir bien compris, mais j'avais quelque lacunes ! beaucoup plus agréable de suivre un tutoriel en Français encore merci
@@ihaveacreeplingdepression5708 C'est un commentaire qui me fait extrêmement plaisir ! Merci beaucoup !
@@sarv.live7 je le rejoint ! c'est tellement plus limpide quand c'est en français, ca fait 3 ans que je suis sur TD, et 3 ans que je me cogne plein de tuto anglais. C'est cool, mais ca restera toujours moins bien que ma langue natale, donc merci merci de faire les tuto en Français :-)
@@videoscenik Je vais continuer alors ! Merci encore !
keep going in french It does not bother me
@@ZackRodell thank you!