🐝Speedybee Mario 5/ rcinpower major wasp/ air unit O3/ no jello/ sin hélices
HTML-код
- Опубликовано: 17 фев 2024
- Video montaje frame Mario5 • Speedybee Mario 5 DC-r...
00:01 prueba de vuelo estabilizado gyroflow
00:48 dvr
04:30 stack speedybee F7 V3
05:03 rcinpower wasp major
-Frame Mario 5 por 32€ www.xt-xinte.com/SpeedyBee-Mar...
-Frame Mario 5 (cupon 5%) "cupondron"
www.stonehobby.com/products/s...
-Speedybee F7 V3 (cupon 5%) "cupondron"
www.stonehobby.com/products/s...
-Motores rcinpower WASP major s.click.aliexpress.com/e/_DDT...
✅Grupo dron DJI O3 air unit t.me/djiO3airunit
✅Grupo dron DJI FPV / AVATA t.me/drondjifpv
✅ Aquí me podéis encontrar t.me/ELRSfpv
✅ Grupo emisoras, expressELRS t.me/radiomastertx16
🔥 Aquí compro mi material FPV t.me/cupondron 
Хобби
Ereh Un crack, me encanta como vas contando el montaje... Sigue así, que ayudas muchisimo!!!
Great flight ;)
gracias amigoooo
Te ha quedado muy fino, aún estoy esperando que baje algo la 03, la jodía no baja de precio ni de coña, al final tendré que claudicar y pagar los 200 pavacos😢, me encanta tu canal 😊
Hola te ha quedado guapísimo yo voy a empezar a montarlo ya con ganas de que me lleguen las piezas, una pregunta he comprado los mismos motores que has montado tu que helices has montado y donde las compraste?
un saludo
hello friend do you have propeller link
Hola, solo quiero dejarte un dato y es que acabo de montarme un mario 5 con la speedeby f7 y al montarlo a tocado uno de los brazos del condensador la tierca de hierro que esta debajo del frame y se me a quemado, ten micho cuidado con ese frame
hola! Que buen video. Podrías compartir tu pid tuning?
Le puse lo mismo que máster 5
# dump
# version
# Betaflight / STM32F7X2 (S7X2) 4.4.0 Apr 11 2023 / 05:25:16 (4605309d8) MSP API: 1.45
profile 1
# profile 1
set profile_name = -
set dterm_lpf1_dyn_min_hz = 67
set dterm_lpf1_dyn_max_hz = 135
set dterm_lpf1_dyn_expo = 5
set dterm_lpf1_type = PT1
set dterm_lpf1_static_hz = 67
set dterm_lpf2_type = BIQUAD
set dterm_lpf2_static_hz = 135
set dterm_notch_hz = 0
set dterm_notch_cutoff = 0
set vbat_sag_compensation = 0
set pid_at_min_throttle = ON
set anti_gravity_gain = 80
set anti_gravity_cutoff_hz = 5
set anti_gravity_p_gain = 100
set acc_limit_yaw = 0
set acc_limit = 0
set crash_dthreshold = 50
set crash_gthreshold = 400
set crash_setpoint_threshold = 350
set crash_time = 500
set crash_delay = 0
set crash_recovery_angle = 10
set crash_recovery_rate = 100
set crash_limit_yaw = 200
set crash_recovery = OFF
set iterm_rotation = OFF
set iterm_relax = RP
set iterm_relax_type = SETPOINT
set iterm_relax_cutoff = 15
set iterm_windup = 85
set iterm_limit = 400
set pidsum_limit = 1000
set pidsum_limit_yaw = 1000
set yaw_lowpass_hz = 100
set throttle_boost = 5
set throttle_boost_cutoff = 15
set p_pitch = 39
set i_pitch = 97
set d_pitch = 43
set f_pitch = 129
set p_roll = 34
set i_roll = 79
set d_roll = 32
set f_roll = 124
set p_yaw = 32
set i_yaw = 88
set d_yaw = 0
set f_yaw = 100
set angle_level_strength = 100
set horizon_level_strength = 50
set horizon_transition = 75
set level_limit = 55
set horizon_tilt_effect = 75
set horizon_tilt_expert_mode = OFF
set abs_control_gain = 0
set abs_control_limit = 90
set abs_control_error_limit = 20
set abs_control_cutoff = 11
set use_integrated_yaw = OFF
set integrated_yaw_relax = 200
set d_min_roll = 29
set d_min_pitch = 40
set d_min_yaw = 0
set d_max_gain = 37
set d_max_advance = 20
set motor_output_limit = 100
set auto_profile_cell_count = 0
set launch_control_mode = NORMAL
set launch_trigger_allow_reset = ON
set launch_trigger_throttle_percent = 20
set launch_angle_limit = 0
set launch_control_gain = 40
set thrust_linear = 25
set transient_throttle_limit = 0
set feedforward_transition = 0
set feedforward_averaging = OFF
set feedforward_smooth_factor = 65
set feedforward_jitter_factor = 12
set feedforward_boost = 15
set feedforward_max_rate_limit = 90
set dyn_idle_min_rpm = 0
set dyn_idle_p_gain = 50
set dyn_idle_i_gain = 50
set dyn_idle_d_gain = 50
set dyn_idle_max_increase = 150
set level_race_mode = OFF
set simplified_pids_mode = OFF
set simplified_master_multiplier = 90
set simplified_i_gain = 130
set simplified_d_gain = 100
set simplified_pi_gain = 85
set simplified_dmax_gain = 50
set simplified_feedforward_gain = 120
set simplified_pitch_d_gain = 120
set simplified_pitch_pi_gain = 105
set simplified_dterm_filter = ON
set simplified_dterm_filter_multiplier = 90
set tpa_mode = PD
set tpa_rate = 35
set tpa_breakpoint = 1200
rateprofile 0
# rateprofile 0
set rateprofile_name = -
set thr_mid = 25
set thr_expo = 65
set rates_type = ACTUAL
set quickrates_rc_expo = OFF
set roll_rc_rate = 7
set pitch_rc_rate = 7
set yaw_rc_rate = 7
set roll_expo = 13
set pitch_expo = 13
set yaw_expo = 13
set roll_srate = 67
set pitch_srate = 67
set yaw_srate = 65
set throttle_limit_type = OFF
set throttle_limit_percent = 100
set roll_rate_limit = 1998
set pitch_rate_limit = 1998
set yaw_rate_limit = 1998
set roll_level_expo = 0
set pitch_level_expo = 0
# end the command batch
batch end
#
Nice one 👍 great quality from this O3 , goggles 2?
Yes, G2
H; wich screws did you use for the Motors? i mean the M3 but how long are they?
Hola, te ha quedado espectacular, me estoy iniciando en el tema de montaje de drones fpv, podrías decir o poner el enlace de donde compraste el tema de emisora, y el transmisor de vídeo, perdona pero no entiendo mucho del tema. Gracias.
Si quieres por aquí te podríamos ayudar t.me/ELRSfpv
Hola , muchas gracias por tu parte y por responder tan rápido. Muy amable. Si no es indiscreción por cuanto le salió el dron que montas en el vídeo, de nuevo muchas gracias.
@@josemariaeliasdelgado9446 35€ frame
83€ F7 V3 BL32 50A
100€ motores wasp major rcinpower
250€ air unit o3
Que tal va con el viento fuerte en el mario 5 pro
Lo volé poco ya no lo tengo, le puse unos motores potentes los rcinpower jasp major
Hola, en ese vuelo de prueba de casi 6 minutos que capacidad de bateria utilizaste?
Creo que 1300 black serie cnhl, era un vuelo tranquilo
que antenas recomiendas para las gafas dji v2
Yo tenia las truerc x2-air
Con que le das mas color a los videos?
Utilizó adobe premier o davinci
Que batería has usado?
1300 cnhl negra