Vehicle Winch, Winch from Anywhere!! [Custom Trailer Winch Setup]
HTML-код
- Опубликовано: 15 окт 2016
- This is the custom winch setup that I use for vehicle recovery, loading my racecar, or getting anything out from anywhere. If using for larger vehicles or dead weight, you'll need a larger winch, but this plate and chain setup is the way to go.
-WARN Portable Anchor Plate, Model# 70770
www.northerntool.com/shop/tool...
-Superwinch 1220210
LT2000 Utility Winch 1.0 HP Motor
www.jegs.com/i/Superwinch/846/...
Thanks For Watching!
For Merch head over to our store on teespring!
teespring.com/stores/clevor-bmf
Check out our our website here!
www.clevorbmf.com
Follow me on social media!
TikTok:
vm.tiktok.com/9hqhAb
Facebook:
/ brooks.mf
Instagram:
/ fred_stang408
Snapchat:
/ fred_stang
My Website:
www.clevorbmf.com
Disclaimer:
Due to factors beyond the control of ClevorBMF, I cannot guarantee against improper use or unauthorized modifications of this information. ClevorBMF assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ClevorBMF recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ClevorBMF, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ClevorBMF. 
Авто/Мото
I think I’ve got the same winch in Norway 🇳🇴 ! 😃
Haven’t yet decided on how I will use it. So far it’s been pretty useful with a mobile setup 😂
Hell yeah!
Nice video.. I welded a bracket w/ angle iron, bolted it on a winch, then bolted separate angle iron on a trolley (I Beam), then drilled 5/8” holes through the sides, slide 5/8” hitch pins in for a ceiling hoist that can be easily removed, I’ve used it to pull motors and jeep tubs.. I then use the 5/8” holes to attach chains to the inside truck bed eyelets to roll in my Harley on a chock cart.. also use chains with winch bracket to load cars in car hauler, hooking to the front tie down eyelets.. I then welded 2” tube on a removable bracket for hitch receivers. All the power comes from a chargeable jump starter box..
I saw this video and bought the portable winch plate set for the versatility. This winch plate is made by Warn, the company that makes heavy duty winches. They know way more about winching than the stupid hater comments on here. Plate and chains are solid AF!!
🤘🏻
You solved it. I’m dead serious, you’re the man!!
Lol thanks 🤘🏻🤘🏻🤘🏻
Great idea! I have a small ATV winch that I'm going to use to pull a light weight cargo trailer into a tight spot, but I don't want to permanently mount it, so this looks like a viable solution.
I’ve still got the same setup working all these years later with no problems. Awesome setup 🤘🏻
I have a similar setup with a small 12 volt 'boat trailer' winch. It's already mounted to a plate almost like yours, but it has a factory cut opening for the plate/winch to hook over a tow ball. I have a pre made length of chain through the opening, and I loop the chain over the tongue jack. Works great pulling lawn tractors and ATV's onto my trailer.
Great idea. Just wanted a light duty winch system to pull my motorcycle s onto my trailer, no more than 600 lbs. would seem to work for that👍
Absolutely. I’ve been using it for my 3000 lb race car for 5-6 years with no problems
You just solved my problem, thank u.
You’re welcome!!!
Thanks for the video excellent idea
Welcome!
Now I can use a winch on uhaul rental trailers hahaha
Damn good idea
Great idea. Couldn’t find the plate with chains on Amazon link. Could you post where to find it online?
WARN 70770 Portable Anchor Plate for Utility Winches , Black a.co/d/4okmtmR
My kinda ppl.😂😂💪🏾💪🏾 Get the job done
Damn right!
Clever...
wow thats smart
Thanks 🤘🏻
How did you get around the black box and still used the controller?
Not sure what you're asking..... what black box?
where did you get the plate. I have found some but not very durable
Northern tool and equipment
WARN 70770 Portable Anchor Plate for Utility Winches , Black www.amazon.com/dp/B000CQBMP4/ref=cm_sw_r_cp_api_glt_fabc_KZTGNWFVX6NPCVESKRC0?_encoding=UTF8&psc=1
What kind of truck do you have?
+Xorick 2010 F150
The truck is not a problem may ve just the winch??
@@BMF_Garage do you athink a 2500 lb winch will pull a 4200lb vehicle into a trailer??
Yes it will pull a truck as long as your not going up a steep hill or steep ramps. The rolling resistance isn’t that much. I’ve used this winch on vehicles up to 4000 lbs, just have to be smart about it and how you pull the load.
I thought this was Matt Ryan quarterback.....
Looks dangerous...I tow everyday and that's just asking ng for trouble... anyhow it works for you so goodnluck
Used improperly it could definitely be dangerous, but then again so can anything.
@@BMF_Garage holding all the weight by chains is not safe. Defeats purpose of it
The chains are rated at more weight than the winch. Only a 2000 lb winch. Pretty sure the winch cable is the weak point here, but what do I know... only been through safety and rigging courses for the last 15 years of my career.
Anything can be dangerous if used incorrectly.
Anything can also be safe if used appropriately with common sense.
We recovered huge barges when building bridges the exact same way. It looks sketch but when your in the middle of a river attachment points are very few. We rigged all of it for the winch operator & did hooked were he told us to. I always thought the winch needed to hard fastened but out on a barge it wasn’t possible. If anything when your in a bind you do what you have to do. Just move slow & watch everything just like we were told to do
Exactly!
Fucking genius!!!
I thought so
@@BMF_Garage , lol quick question, to pull a 4200 lb car on a trailer do you think a 2500lb winch be enough?? Or where do i get more info?m
It’s all about rolling resistance. When the car is in neutral and rolling Greeley it doesn’t take much to get it going. I’ve used this 2500 lb winch setup to pull trucks on my car trailer. It’s low and doesn’t have much up hill resistance.
It’ll depend on your setup, but most times a small winch like this is more than enough to pull a free rolling truck anywhere ...
Pulling one out of the mud is another story lol
10 second video of it working would have been better.
🤣🤣🤣 sorry. I suck at taking 🤷🏼♂️
alright alright, dudes givin away free links? from his chain i recon. figger i must be 2 late cuz i aint see sheet in that dascription box bout no chain links like ole boy said.. huh. 5yr old video prolly xplains why s.o.b. what a nice man.
Old video and links weren’t good anymore so I took them down. Hard to keep up with editing links every time things change. I got 400 videos… can’t go back through every one and update links every month 🤣🤣🤣
@@BMF_Garage oh dude no, i think you read my message wrong..Lol 100% was a joke, my bad if i came across otherwise. i was making a 'pun'..idk it was random/dumb (ran-dumb?), just felt like bein a sillygoose. u said link, as in a hyperlink, i was pretending as if i thot u were referring to a _chain_ link..thats all. damnit i feel bad now! i was bein for real tho when i said "what a nice man" (even tho it sounds sarcastic)
Lmao 🤣 gotcha