96-2000 EK EJ Honda Civic Short Throw Shifter Before And After + Install

Just a quick comparison of a stock shifter and a cheap DNA Motoring dual bend short throw shifter. Plus a quick install guide of short throw and polyurethane bushings.
Please use my Amazon links to purchase items.
✓✓✓Thanks for watching! Please Like And Subscribe✓✓✓
MOD LIST:
Dual Bend Short Throw Shifter $11.88
amzn.to/2WAwSEO
Polyurethane Shifter Bushings $18.04
amzn.to/2JP5I7p
Black With Red Accent Shift Knob $9.46
amzn.to/2WcNa7s
HAmotoraports P28 Tuned with crome.
29 degrees of timing
DNA Motoring muffler
amzn.to/2MnXa9J
RPF1 Wheels 16x7
amzn.to/2VNIDTW
205/45r16 Tires
amzn.to/2M9CKB9
Carbon Fiber Intake
amzn.to/2K2j6Ed
K sport coil overs
Amazon front lip
amzn.to/2YGYCFc
Amazon rear lip
Contact Information:
Personal Facebook page
/ bo.leal.1
follow on Instagram pBm10lfhF8...
greasemonkeymod facebook
/ posts

[@constipatedchicken4649]

If you guys are having troubles with it hitting the exhaust or the actual shifter hitting it’s because in the video he installed the rubber grommet that sits on the ball of the shifter upside down just make sure you don’t put the rubber grommet on upside down like he did and you’ll be fine, adding a bit of grease in that grommet where it meets the ball also helps if your car has a lot of miles will just help but you don’t need it

[@brandonr5188]

Thanks for you help

[@TerrySmith-fo3qe]

Yes, when your trying to put the rubber grommet over the shifter bearing you should put the new rubber grommet in hot water so it will go over the bearing and not break…I used some black lithium grease inside the grommet after I installed it.. then I slid it over the shifter ball. Then installed the ball sleeve. Gets a little messy. But cleans up nicely with shop rag. Make sure you install the cockpit rubber grommet onto the shifter metal housing before you put the unit back in. Then after install go inside cockpit and pull it up and around the metal curb . Looks very nice.

[@ericdiaz4893]

thank you i was stressing

[@honsokutv3073]

I finally got it to work after reading the comments

[@lowbudgetkswap5774]

Awesome I just ordered a Megan Racing short shifter and a shifting stabilizer kit for my ek6 now I know how to put it in thanks for the tutorial!

[@ranger_dudeoff-roadadventu1903]

How do you like it I just bought the same

[@slipknotfan2217]

the only useful guide! thanks so much

[@chaos_f4i]

Really informative thank you sm!!

[@thatmeanej8]

Another trick to get that back bushing on, get an 8mm socket, press it in, QUICKLY go up a size then another size to where it’ll easily go over the tip n the socket will push out👌🏼

[@qualitytouch]

I may consider doing this on my 98 Civic build over on my channel. we'll see. thanks

[@andyyu5973]

is the dustboot on upside down?

[@mikeroncelli3983]

This is perfect I just bought my short throw and now I have a guide video! Thanks man

[@BoBuilds]

Wow that's awesome lol, it's super easy and it made a huge difference. The video doesn't really do it justice. It's so much firmer and really engages the gears better. I love it

[@peterjavate9054]

he put the bushing on the wrong side. it should be on the bottom of the ball

[@jonathanleyton8945]

Can someone give me the actual name of the “boot” that’s on the shifter that prevents the heat from coming in from the bottom

[@reysir707]

looks like you put the dust seal upside down, if you compare it to how it looked when you removed the stock one

[@diegotorres2957]

Does the short shifter in the link fit to a 1999 cx hb?

[@jasoncameron34]

Nice install looks pretty simple and seems to make a difference

[@BoBuilds]

I really thought it would be more involved but it was very easy and yes in made a big difference! I love the way it shifts now it's not like a floppy noodle any more

[@jasoncameron34]

@@BoBuilds it looks easy whenever I convert mine into a 5-speed that's what I'm doing thanks for the video

[@BoBuilds]

No problem 👍

[@neailprasad1905]

Mine comes with grease where would i put the grease at

[@karlorasic6243]

is that d15z6

[@howl_drew]

is it necessary to put on the new bushings? is it possible to just buy the short throw shifter and install with all the original parts?

[@michaelp8103]

yes

[@jordan3204]

Bushings are only $18 and it's definitely worth doing. It'll remove any slop or play that your shifter has. I highly recommend doing the bushings when you do your short shifter.

[@dkinley334]

I'm so fucking disappointed in myself it's late I've worked 9 and a half hours and I wanted to install my short shifter because it came today and I was getting frustrated and I finally got it to the point where I was putting the linkage in and the shifter just fell right out so now I'm getting up early tomorrow to put it in.

[@mortal2319]

2 years later, how’d it go bro?

[@dkinley334]

@@mortal2319 I wound up putting it in backwards, to where to would hit the cups in the cupholders. I had a coworker come over and he flipped it in 5 minutes. Lol. But after that the shifter was great nice n short. I had an eBay one and it never broke on me.

[@isrv]

Hopefully I don’t get looked at weird when I buy a 5lbs Thor hammer 😭😅

[@lamontruffin327]

I'm a do this to my Honda

[@Spudstrodamus]

Awesome comparison video

[@BoBuilds]

Thanks man, wish I could've synced up the shifting better lol

[@chuy_hn6897]

very helpfull thanks!

[@ivanzelaya1595]

Hey I just installed mine and it keeps hitting my exhaust pipe . Any clue? I have stock exhaust

[@barneyboy6427]

Same problem

[@itsjohnnnog]

This video installs it wrong lol

[@guigoncas]

@@itsjohnnnog how come?

[@itsjohnnnog]

@@guigoncas the ball is supposed to be on the top side instead of the bottom side of the metal bracket. Look at when he first pulls out the stock shifter vs when he reinstalls it

[@guigoncas]

@@itsjohnnnog oh yh just noticed it, thanks.
So if I follow the install and put that rubber boot correctly it'll work fine, right?

[@panamawes7282]

The bottom of mine touches stock exhaust

[@ruldycarrillo1074]

Can I used this on my honda civic ex 1999 4 doors anyone please let me know 🙏 thank you

[@thefudger1945]

You should be able to 96 to 00 is the same gen

[@angelwings2851]

It’s a good video but I think that he needs to slow it down a little bit and talk us thru it so that we can pay more attention

[@Buenozdakid]

True. Some people are visual learners and some aren’t

[@csgperformance]

The ktuned one is even shorter. I have a replica and it works fine

[@chaos_f4i]

Just put my k tuned one in with this video mine still feels a bit long compaired to my old buddy club

[@chaos_f4i]

Take that back just took it for a drive😂😂

[@trevorgrooms4398]

Do you have a link for the shifter or the name

[@derrickjones4371]

Nice bro

[@BoBuilds]

Thanks

[@soljojo6380]

Does it work on ek3 ?

[@Bl4cKCuBE]

sure

[@smalltom3373]

cheers lad for making a useless guide and not even showing how its supposed to be done, the ball is supposed to go inside the support housing and pivot from there so if anyone is looking at this video from now on, put the dust boot on so the plate is below the ball, otherwise it will hit the exhaust and not pivot right at all, and you wont make 1st, 2nd, 5th and reverse gear as it doesnt pivot properly and take the linkage across to go to 1-2-5-R

[@guigoncas]

You mean put that rubber boot on the ball but upside down, so the plate is exactly under the ball instead of on top?

[@rocco2valid505]

Yeah I did exactly what he did now my shifter is dropping down on me😭

[@trillking653]

wow, i hate driding with the stock shifter..

[@skrimper]

Do you mean drifting, driving or riding?

[@BumAzzSugarDaddy]

Thanks bro