Manually lowering a E46 BMW convertible top

Поделиться
HTML-код
  • Опубликовано: 27 дек 2024

Комментарии • 38

  • @gasphotography
    @gasphotography 11 месяцев назад +8

    THE BEST video explaining everything, in detail…and I’ve watched them all! Thank you.

    • @KrisO1976
      @KrisO1976  11 месяцев назад

      Thank you. I just want to be helpful, and I'm glad I helped someone.

    • @paulbabe
      @paulbabe 10 месяцев назад +1

      I agree. I watched another video , but chap didn't mention locking the rear cover

  • @samahmed1146
    @samahmed1146 Месяц назад

    Hello thanks for the video i am. Wonder if u can provide me a pic of the hydraulic pump wiring mine only open first quarter and can hear the pump in the trunk working ..thank u in advance

  • @chrisshekian9317
    @chrisshekian9317 8 месяцев назад +2

    My top is open and the light is blinking. When i hit the open button it just clicks and when i hit the close button it downs sound like it's trying to do something but nothing happens. Also my trunk release on my remote doesn't work. Please help

  • @MODINDUSTRY7
    @MODINDUSTRY7 Год назад +2

    I was having the same issues , wire was fine no codes mostly got it down to a hydraulic issues so I did a full fluid flush empty the reservoir , manually open and close the top a few times empty the reservoir again and repeat the process until all the fluid is out
    filled with Febi zh-m and it works fine now
    no issues, so yeah I’m pretty sure that Concentrated dirt in the bottom of the reservoir causes issues within the Hydraulic system or the fluid just deteriorates overtime like any other fluid

  • @sonyaculbreth6722
    @sonyaculbreth6722 3 месяца назад

    Attempting to manually open my 2004 330CI top. I am unable to get the tonneau lid to open. I think something is wedged preventing it from opening. When I opened it, there was a crunch. I think the back panel from the headrest somehow pulled off as it is now missing. I was able to close as normal but now will not even manually open the lid.

  • @KennethTurman-t6w
    @KennethTurman-t6w Месяц назад +1

    Thanks I appreciate it!!!

  • @andreruiz1926
    @andreruiz1926 Год назад

    Best video ever. I have an 05 330ci convertible ZHP. My top goes down very very very slow with assistance and to come back up same thing. What you think I'll need. A motor ?

    • @KrisO1976
      @KrisO1976  Год назад

      It's just a thought. . Look at the hydraulic pump and see how much fluid is in it and if it's dirty. I think that is the only thing that would affect the speed of the roof

  • @danimeier4006
    @danimeier4006 Год назад

    Hey kris, you heard of the problem with the hydraulic control unit its unter the left site of the roof i think. Because my roof just open a little bit and hold in de middle like he go no oil pressure sometimes it works but the alst few days it just stuck in the middle in both ways open and close. Do you have a tipp? Or maybe you know how to change the control unit becusse its unter the roof?

  • @Giucemayn
    @Giucemayn Год назад

    I have an 04 325ci. The top works here and there by pushing the buttons and there are no popping noises. Today, there are no lights on either of the buttons. Would it be a fuse issue, if so, how/where would that be?

    • @KrisO1976
      @KrisO1976  Год назад +1

      It could be a fuse, but if sometimes it works and sometimes it doesn't, it sounds like a loose or broken wire. Your fuses are located inside your glove box. There are 2 white tabs on the top. If you turn them, your fuses will open up. 5 fuses control your roof. 6, 12, 35, 42, and 46. Some of those fuses control a few things and would cause lights on your dash to come on or other stuff to stop working. I would check there first though.

  • @CowboyCoty13
    @CowboyCoty13 8 месяцев назад

    Do you have a thought on whether using the allen wrench or closing it with the button puts more stress on the plastic carrier in the latching mechanism above the windshield? Weird question I know but I pieced those carriers together and want them to go as long as they can without breaking.
    I look forward to hearing your thoughts. Thanks

    • @KrisO1976
      @KrisO1976  8 месяцев назад +1

      I do have an opinion, but it's just my opinion. When you push the button, the gear just seems to stop when it's supposed to. When you use the allen wrench, you can keep on turning the gear until the latch breaks. Nothing stops you other than it getting a little tight. I broke a latch on my old 325Ci by using the wrench. I think I know better than to do that again, but I haven't had to use the wrench in a bit now.

    • @CowboyCoty13
      @CowboyCoty13 8 месяцев назад

      @@KrisO1976 I'll use the power latch then, I'm only trying to use it once or twice before I sell the car

  • @tatendanyoni9998
    @tatendanyoni9998 Год назад

    Mine has no problem when it comes to closing,but sometimes when opening,it opens half way and l have to finish by hand push...What could be the problem ?

    • @KrisO1976
      @KrisO1976  Год назад

      One of mine does this, and I haven't tried to fix it yet. I have a few other things I'm working on first. If you look at the hydraulic motor in the trunk, it likely has dirt built up inside it. I believe the lines could be clogged if you can't find any other problems. It is 20 year old fluid.

    • @tatendanyoni9998
      @tatendanyoni9998 Год назад

      @@KrisO1976 Whats the possible solution ?Replacing the hydraulic fluid or topping up ?

    • @KrisO1976
      @KrisO1976  Год назад

      @tatendanyoni9998 my plan is going to be to try to empty all the old hydraulic fluid out, put me fluid in, and hopefully, after a few cycles, it will clear itself out. If not, I may have to pull the lines and try to blow air through them, too loosen out any stuck debris. If you try this and it works (one of the comments below did this and it worked) let me know. I have a lot of things lined up to do before I get to that. Plus I work a lot.

  • @cashmaker7914
    @cashmaker7914 Год назад

    Just brought a 330ci and can’t get the top the to sit flush when down is the a common issue or am I doing something wrong

    • @cashmaker7914
      @cashmaker7914 Год назад

      It basically wouldn’t store away under the hatch like it’s not down all the way

    • @KrisO1976
      @KrisO1976  Год назад

      It's a rare occurrence when that happens that I know of, but if you push your top back manually and it won't go down all the way, yet turning your car off. The roof will usually just fall the rest of the way.

  • @YarmilaGoycochea
    @YarmilaGoycochea 9 месяцев назад +1

    Very good explanation thank you 👌👍

  • @donttalkoverbarz3785
    @donttalkoverbarz3785 7 месяцев назад

    I’m having same problem, roof will open about a few centimetres, anyone know the solution? Trying not to get times off of an electrician

    • @aggelosvamvakidis3905
      @aggelosvamvakidis3905 4 месяца назад

      Same here im betting its the hydrolic motor cause the other two motors work fine

  • @annawalsh2498
    @annawalsh2498 10 месяцев назад

    I’m having trouble removing the little middle section between the 2 back seats. It won’t budge. Has anyone else had this problem?

    • @KrisO1976
      @KrisO1976  10 месяцев назад

      There is a plastic tab at the top that keeps it clipped in. Press down on that tab and pull towards you. It should release.

    • @annawalsh2498
      @annawalsh2498 10 месяцев назад

      @@KrisO1976 I spent 30 minutes trying to get it out by pulling the tab. I think something is stuck so I just gave up

    • @KrisO1976
      @KrisO1976  10 месяцев назад

      I just went and took a look at mine. The plastic tab that you push down on, barely snaps around a post to hold it in place. Maybe sliding a screw driver in there and pressing down will unclip the center section.

  • @anniewilkes6011
    @anniewilkes6011 8 месяцев назад +1

    Thank you so much!! 🙏

  • @SHARPOETRY
    @SHARPOETRY 5 месяцев назад

    Bro Thank you sooo much for this!!!

  • @whoohaaXL
    @whoohaaXL 7 месяцев назад

    Okay, so after removing that middle rear console, I put it back in and gave it a decent slap and I cannot remove it for the life of me anymore

    • @KrisO1976
      @KrisO1976  7 месяцев назад

      There is a spring clip at the top that you have to press down on as you pull towards you. If it's really jammed, you might have to pry down with something.

  • @jean-claudemorin7377
    @jean-claudemorin7377 7 месяцев назад +1

    You’re the best

  • @jkengine02
    @jkengine02 Год назад

    Mine can open but wont close by itself. So i tried to open it and then it got stuck in the middle. The wire you mentioned, i looked at jt on the driver side hinge. It looked perfectly fine. Once it stops in the mid open, i guess the motor completely stops and i cant fold the top. So i tried to see if the back cover will budge, it seemed liked the rear cover was also stuck but the motor gave jn and i was able to get it to almost close position. Then used the allen key in the back seat (rusted and barely moves) lock it in place. By then the blinking light turned off and i was able to use the close button so the stuck top would fold back in place. Man what the fuck it pissed me off so bad. Long story short, thanks for the vid. Ill be opening manually from now on too.

  • @AntonioGonzalez-lz4mu
    @AntonioGonzalez-lz4mu 8 месяцев назад

    👍Awesome 👍