@@Phalaxis83 It’s not entirely right to mount the aio like that infact. Bottom mount it it possible, as it leaves a gurgly sound alongside allows air bubbles to enter the cooling turbine which isn’t great for long-term cooling. Top mounting a aio reduces its life span by a lot.
I don't know why but when the music hits and the b-roll starts. It kinda has the vibe of nzxt room on pc building simulator. This is a great all nzxt build.
Nick, if PC building is a type of therapy for you, then by right, you are our PC Therapist! Keep these awesome inspirational builds and videos coming mate! It's what's helping us get through 2020 hehe.
Recently ordered this case and a few other similar parts thanks to your first video of this setup so it’s awesome to see this now! I start building soon :)
As a former resident of Phoenix Arizona, I feel your suffering, with temps hitting between 42c and 48.8c during the summers... Anyways, I tried to route the hoses for my NZXT Kraken as you did, in my H510 case, but just couldn't get them to bend that way without it feeling like they were going to Kink and block flow, maybe I will try setting the pump differently to get some more slack (it is currently set with the hoses at the 9 o'clock, not the 6 o'clock like you have them) and see if that makes a difference. Thanks for your great videos, glad I found your channel!
From the last H510 elite build video, I’ve loved using my pc since and that video was my inspiration of how I built my pc too! Awesome video! These H510 elite cases are very sexy and sleek!
Hey man, thank you for your first h510 elite build. I was so inspired by your build that my current setup is actually from your first video. Again thank you so much
Recently got a H510 elite with the intention of putting a 3080 in there. On NZXT's website they say the clearance for GPU's is 313.6mm with front radiator installed. But you guys put a 318.5mm card in with room to spare. I was wondering if you were able to please measure the clearance? Would be great to open up my options for Graphics Cards hahaha, or I could just ditch the idea of an AIO, get an air cooler and not be an RGB addict. Either way, thanks for this video! :)
I messaged nzxt support and they said the same thing. I've got my new pc with the same case and a 3080 for about 2 weeks now. I just want to clear up that NZXT support is absolutely bullshit. The card fits perfectly fine WITH space. Don't trust nzxt support!(kinda) all in all, a 3080 will definitely fit in this case
I have a h510 elite with a 3080 (Palit gamingpro OC) and a Kraken X63 sandwiched between Aer RGB AND Aer static pressure fans with millimetres to spare!
I had a 115i pro corsair aio and there wasnt a lot of space between my rog 3080 and the aio. Not sure if its bad to have so little clearance between the gpu and aio. I decided to switch the aio with a noctua nh-d15s for safety measures. Does anyone know if the clearance between gpu and aio radiator matter tho?
This video made me pretty happy and worry free. I purchased pretty much everything identical except for the gpu. Its still the asus rog strix, but the 3070 and didn't know if it was gonna fit. Thank you for this awesome video!
@@GearSeekers love the vids but I’m sorry the bios is terrible and my customers complained ever since I’ve added them to my part lists. Just sharing my experience.
I was stressing about mounting my AIO (Kraken Z63) at the top of my case (Fractal Meshify C) in my new build because 280mm AIOs aren't officially supported for the Meshify C, but this video has more or less convinced me to front mount it because it looks so sick here. Thanks Nick!
Love the cohesive vibes. All AORUS or MSi build would be noice. All my peripherals are SteelSeries just so I could use one software to control all the RGB. Great vid as usual.
I never thought there'd be a day I'd say this but... "Apparently, here at Gear Seekers we not only do cable management, we also do AIO tube management."
So, I did some research, but, I have not concluded a final answer. If you go ahead and buy the Kraken x53 RGB, you don't use the fans that come with them, do you? Because you ended up just using your Radiator and Stock AER RGB 2 fans that the case provided, so where did the 120mm ones that came with your Kraken x53 go? To the exhaust and top?
@@epicmike3915 They're not by any means good compared to other cases in my opinion. Next to no ventilation. Could've achieved a similar look if they thought it out slightly better.
Yes Nick the original NZXT builds are great. I bought 2 710's and guess what they suck, well no they actually dont suck they have zero airflow. They look pretty. But run hot has hades. Replaced them with a 275R airflow and a lian li lancool mesh II and way more better. But thanks for the inspo brother. Everyone save your money and doooo nooooot buy an NZXT!
Im ordering my pc parts soon. Going for this exact design with my pc. I'm using the h510 elite and the new gaming x trio and b550 steel legend and the kraken aio.
Really wanted to get a Suprim X 3080 in this build but saw the specs that it was 335mm Long... Does anyone have any idea whether it has any chance of fitting it in...?
Hey GearSeekers! I just built this type of PC last week and I was heavily inspired by this build you did when you made the streaming pc video. I was wondering what cable did you use to connect the LED light strip? Mine is just hanging there lol
Ayy another Sydney sider! All my parts are on the way, inspired by your original video! Glad to see you've flipped the AIO cooler since and I noticed you installed it at a 6 o clock position as well, which doesn't block the ram modules. Looks super clean! What cable extensions did you use though?
thank you so much for this video, i am buying the same case and those royal ram but wasn't sure how will it look. Trust me u helped me a lot because for me Looks matter the most. : )
Did you use an LED splitter for the two rear fans to make them light up? Because I also want to install two more AER RGB fans but I noticed there are only two led ports on the smart device. Please help.
I know that your probably won’t see this buy thanks for inspiring me to try and build a pc but I first need to save up for it I would love if you could maybe make a step by step on this build Because I really like it but thanks 🙏
Very clean looking build! I have a 3080 in my rig but it took patience and a bit of luck! GSKILL has been my go to ram. I find it to be the most reliable brand I've used!
Have you experienced any problems wit the led strips in the case? They don't light up in my build 🤔 isn't something connected yet between the strips and the hue bridge that I forgot? Need help 😊
5:16 when that classic gear seekers tune kicks in
👍
Hey I just want to let you know I'm building my first pc and I got an inspiration from your build ✌
Legend!
Hell yeah! Congrats!
Its banana.. banana.. its banana
@@GearSeekers Where did u get the custom cables from?
I just bought my pc parts can't wait to build it
Nothing like a bit of build inspo to make me want a new build even more. AIO tubes tucked away looks clean as.
Is it fine mounting the aio like that
@@ruskle7953 Of course it is
@@Phalaxis83 thx man
@@Phalaxis83 It’s not entirely right to mount the aio like that infact. Bottom mount it it possible, as it leaves a gurgly sound alongside allows air bubbles to enter the cooling turbine which isn’t great for long-term cooling. Top mounting a aio reduces its life span by a lot.
@@jkstudios365 Did you even watch the video? The AIO is bottom mounted... Not that it matters, top or bottom mount makes no difference.
It's simplistic builds like this that make me consider not going crazy with a custom loop. Damn
I don't know why but when the music hits and the b-roll starts. It kinda has the vibe of nzxt room on pc building simulator.
This is a great all nzxt build.
Nick, if PC building is a type of therapy for you, then by right, you are our PC Therapist! Keep these awesome inspirational builds and videos coming mate! It's what's helping us get through 2020 hehe.
FiNaLlY tHe tUbEz aRe cOrReCt
Building a pc is a bliss! It's so therapeutic especially with your music!
Love how you tucked away the aio cables
Can you please make a build guide for this 🤩
YESSSSS🤩
It would be amazing
When he installs parts he explain it very well imagine if he did a build guide.
Yes please
I've built my PC just three weeks ago and I've gotten inspiration from your previous H510 Elite build. Looks really great!
Finally a build w/ correct AIO direction
Tubes down instead of up
The music in the Cinematic segment got me vibing!
Recently ordered this case and a few other similar parts thanks to your first video of this setup so it’s awesome to see this now! I start building soon :)
Love the music thingy you did at the beggining, so smooth haha. Love your vids!
Thanks mate!
I just completed my first build in 6 years and it's very similar to this one, inspired by your original video :)
same
the strimer plus cables in the previous version makes it 💯
unfortunately they don't work with this hardware combo
@@GearSeekers Could you please explain why they wouldnt work? Trying to build something similar. Thanks!
Great build inspiration video fams. Keep up the hard work
This case is truly BEAUTIFUL
As a former resident of Phoenix Arizona, I feel your suffering, with temps hitting between 42c and 48.8c during the summers...
Anyways, I tried to route the hoses for my NZXT Kraken as you did, in my H510 case, but just couldn't get them to bend that way without it feeling like they were going to Kink and block flow, maybe I will try setting the pump differently to get some more slack (it is currently set with the hoses at the 9 o'clock, not the 6 o'clock like you have them) and see if that makes a difference.
Thanks for your great videos, glad I found your channel!
Omg I just love the H510 elite! Omg!
Just bought this case and the regular x63. cant wait to build in it
Nice!
From the last H510 elite build video, I’ve loved using my pc since and that video was my inspiration of how I built my pc too! Awesome video! These H510 elite cases are very sexy and sleek!
This is one of the most beautiful "simple" builds I ever saw! WOW
Bro your channel is so underrated you deserve more credit. Your PC and edits are so CLEANNNNNN. Keep it up!
I love the colours you used in the build best colour combo you've inspired me to build a pc just gotta scramble up some money
I love your vids and you have been a big inspiration to me I hope millions can be inspired by you!
Hey man, thank you for your first h510 elite build. I was so inspired by your build that my current setup is actually from your first video. Again thank you so much
Hey nick I thought you went off the grid turns out the bell notification turned off by itself so glad you’re still on RUclips!
Nooooo! Damn RUclips!!
Recently got a H510 elite with the intention of putting a 3080 in there. On NZXT's website they say the clearance for GPU's is 313.6mm with front radiator installed. But you guys put a 318.5mm card in with room to spare. I was wondering if you were able to please measure the clearance? Would be great to open up my options for Graphics Cards hahaha, or I could just ditch the idea of an AIO, get an air cooler and not be an RGB addict. Either way, thanks for this video! :)
Its about 330mm if you're being creative. I think they say that to be conservative
I messaged nzxt support and they said the same thing. I've got my new pc with the same case and a 3080 for about 2 weeks now. I just want to clear up that NZXT support is absolutely bullshit. The card fits perfectly fine WITH space. Don't trust nzxt support!(kinda)
all in all, a 3080 will definitely fit in this case
I have a h510 elite with a 3080 (Palit gamingpro OC) and a Kraken X63 sandwiched between Aer RGB AND Aer static pressure fans with millimetres to spare!
@@Ianmundo did you remove the cable management bar to make that work or did you make that fit with the cable management bar?
I had a 115i pro corsair aio and there wasnt a lot of space between my rog 3080 and the aio. Not sure if its bad to have so little clearance between the gpu and aio. I decided to switch the aio with a noctua nh-d15s for safety measures. Does anyone know if the clearance between gpu and aio radiator matter tho?
This is so funny to watch this video with my new NZXT H510 elite Miami Vice themed pc after being inspired by the first one. great job!
This video made me pretty happy and worry free. I purchased pretty much everything identical except for the gpu. Its still the asus rog strix, but the 3070 and didn't know if it was gonna fit. Thank you for this awesome video!
Love the way you routed your AiO tubes!
Wow, a very good presentation, the music really suited the build and the camera angles were perfect.
Saw your last video too, this one is even more inspiring and up my alley in terms of parts used. Thank you!!
How did I miss this video!? Thanks for making this one ✌️ The streamer setup is backkk
That NZXT MOBO looks slick.
It’s probably the worst motherboard on the market
My benchmarks have told its possibly the worst motherboard and my customers have sent me back their pcs due to the Motherboard failing.
The board is fine.
@@GearSeekers love the vids but I’m sorry the bios is terrible and my customers complained ever since I’ve added them to my part lists. Just sharing my experience.
Your lighting is a DP's wet dream
The back version of the H510 will always be a gorgeous case 😍 glad to see another build in it 💪🏼🤙🏼
i can't believe it , ur channel now are going bigger and bigger.
u pc build so eye catching from me.
i remember start subscribe u from 10k subs
Your builds really help with my case choices man!
I'm building a new PC and went with the Lian Li LANCool II after watch yours.
How did you manage to put the tubes on the bottom with the x63 I tried doing it with the same cooler and same case it couldn’t fit tubes down
I was stressing about mounting my AIO (Kraken Z63) at the top of my case (Fractal Meshify C) in my new build because 280mm AIOs aren't officially supported for the Meshify C, but this video has more or less convinced me to front mount it because it looks so sick here.
Thanks Nick!
Gear seekers post! So happy.
This pc build is absolutely beautiful. Definitely one of my favorite builds I’ve seen so far!!
Yeah whatever
I based the look of my build from yours. Thank you for giving me inspiration to build my first rig!
Love the cohesive vibes. All AORUS or MSi build would be noice. All my peripherals are SteelSeries just so I could use one software to control all the RGB. Great vid as usual.
I never thought there'd be a day I'd say this but...
"Apparently, here at Gear Seekers we not only do cable management, we also do AIO tube management."
Yeap! Rare to see AIO done the right way ..... :)
the cpu cable though, looks awful
@@josephdylan4077 your alt account game is awful. Just like your attitude.
@@GearSeekers still not as bad as your cable management game.
@@josephdylan4077 your dads pullout game was even weaker. Should have swallowed.
I like the simplistic clean look of it
I want to build my first pc so ive been looking at a couple of your videos and so far ive found some parts that look alot better that im going to get.
beautiful case. with an endless build options. good job.
4:20 his admiring of the kraken is so funny
Lovely! I got the very same case waiting fresh in the box for parts :)
So, I did some research, but, I have not concluded a final answer. If you go ahead and buy the Kraken x53 RGB, you don't use the fans that come with them, do you? Because you ended up just using your Radiator and Stock AER RGB 2 fans that the case provided, so where did the 120mm ones that came with your Kraken x53 go? To the exhaust and top?
I despise the H510 Elite as a case, but your build and your shots are awesome. Nice!
Purely for aesthetics tbh
Thermals are crap aren't they? I like the look but everyone has been saying they're crap.
@@epicmike3915 They're not by any means good compared to other cases in my opinion. Next to no ventilation. Could've achieved a similar look if they thought it out slightly better.
That trident memory kit looks sexy as hell. And them those nzxt aios have way too many cables. Keep up the great work you guys. Stay safe.
Hahah they do don't they! Thanks for popping past :)
how'd you get the aer rgb in the back to sync up...i'm having lots of problems with mine
Wow, such a nice clean build!
I got the gigabyte 1080p monitor from your review, I really couldn’t find a single review. The monitor works fantastic
Yes Nick the original NZXT builds are great. I bought 2 710's and guess what they suck, well no they actually dont suck they have zero airflow. They look pretty. But run hot has hades. Replaced them with a 275R airflow and a lian li lancool mesh II and way more better. But thanks for the inspo brother. Everyone save your money and doooo nooooot buy an NZXT!
thank you so much for putting the pcpartpicker link!!!!
4:10 he is smiling to us look at the reflection on cooler :D
That's the point lol
So funny, i got exxact same build on order but 10700k and 3070 tuf with 32gb corsair platinum. Cant wait to get it started!
Im ordering my pc parts soon. Going for this exact design with my pc. I'm using the h510 elite and the new gaming x trio and b550 steel legend and the kraken aio.
Hey, I’m building in the same tomorrow with a z63, was there any clearance issues with the Aio tubes facing down?
Really wanted to get a Suprim X 3080 in this build but saw the specs that it was 335mm Long... Does anyone have any idea whether it has any chance of fitting it in...?
U helped me 2-3 times with ur videos..
about cooler master air cooler
MSI mag liquid cooler.
thanks for that buddy.
Hey GearSeekers! I just built this type of PC last week and I was heavily inspired by this build you did when you made the streaming pc video. I was wondering what cable did you use to connect the LED light strip? Mine is just hanging there lol
The one built into the case
@@GearSeekers I looked for it but I couldn't figure it which cable connects to the led strip. Which cable is it and where do you plug it in?
How did you get the tubes facing down?
i loved this build. the nicest looking pc ever for me. minimal yet stunning
Not much of fan of this brand but dam dam you smashed this one out the park. Nice work guys and #ontheroadto150k
Great video, what colors did you use? I would like the color numbers of that purple and blue?
Default blue and purple in CAM. Nothing special
You are the best, I love your channel❤️
Hey man, its amazing, I feel you deserve more subscribers to your esteemed channel, hope you will get soon 🎊🎉
How is the thermals plz?
Wonder if you can use 4 ram sticks and still route the AIO cables around it like you did or would the first ram slot get in the way 4:12
Such a clean build. Damn
Thank you for this build I got my inspiration from it I wanted a new case and I build it and I love it
@4:17 is that an edit? If so that's beyond incredible.
There are 2 layers of stickers. If you angle the camera just right you can look into the lens and do silly shots like that.
Could you maybe do a $500 budget build? That’s around what I have right now and I want a pc before February
what are those light up cables called
Ayy another Sydney sider!
All my parts are on the way, inspired by your original video! Glad to see you've flipped the AIO cooler since and I noticed you installed it at a 6 o clock position as well, which doesn't block the ram modules. Looks super clean!
What cable extensions did you use though?
thank you so much for this video, i am buying the same case and those royal ram but wasn't sure how will it look. Trust me u helped me a lot because for me Looks matter the most. : )
i cant wait for cyber monday
He Gear Seekers on the motherboard B550 VISION D is the debug code AA normal?
yes
I like this build dude
Rgb kalem🔥🙏👍
Nice build!!
What a build
Well, I know what my first build's gonna look like!
That AIO peel 😈
Did you use an LED splitter for the two rear fans to make them light up? Because I also want to install two more AER RGB fans but I noticed there are only two led ports on the smart device. Please help.
Perhaps do a Cyberpunk theme build one day? Just a thought 👍🏼 Great job!
I know that your probably won’t see this buy thanks for inspiring me to try and build a pc but I first need to save up for it I would love if you could maybe make a step by step on this build Because I really like it but thanks 🙏
Beautiful! Any issues with the pump tubes oriented at the 6 o'clock position instead of the 3 o'clock? Pump whine or higher temps? thanks!
Planning to build the same PC. How did you Montage the 4 fans
Very clean looking build! I have a 3080 in my rig but it took patience and a bit of luck! GSKILL has been my go to ram. I find it to be the most reliable brand I've used!
Have you experienced any problems wit the led strips in the case? They don't light up in my build 🤔 isn't something connected yet between the strips and the hue bridge that I forgot? Need help 😊
Would you mind telling me how you got that color rgb? Looks great!
the AIO orientation! Thanks!