THANK GOODNESS I FOUND YOU! Same problem, but great solution!! I thought all that work that I put in on my very first build was a complete waste and have to buy another frame. Again, THANK YOU VERY MUCH! You definitely saved my sanity. OOORAH!!! 🙂
Thanks for the video, I bought a Gen 5 slide to run on a P80 and your video answered my question about the G17 locking lug issue. I will probably run it on a PF940C frame with a gap filler and try to use the marksman barrel. Poi changes with different barrel gens..
I saw someone else comment and I will agree with their comment that this works because you’re using an Polymer 80 CL frame (Custom Long Slide). I would imagine if you are trying this with a P80 full-size or compact frame (None CL Frame) you will end up having to remove material in the channel as others have told you. Please do a video on that and let us know. I build as well, but I’m not jacking up frame just to see.......... 😂
You can also run a Gen 5 19 or 45 slide on a polymer 80 26. Without changing anything. They both run the same spring. You just need that spacer thingy to cover the spring.
You’ve done this yourself, this is exactly what I’m facing now . I have. Gen 5 g19 slide and barrel . Would I still need to use a gen 4 barrel as he stated in his video?
I think the guys that commented on removing more of the frame is in reference to a P940V2 and P940C. The P940CL frames were made differently than the standard P80 frames, giving it a complete round inside the slide area after the nose which corresponds to the Gen 4/5 slide nose. The regular P80 full and compact do not have the full round, which means you will need to remove the interior of the slide area - not just the nose. My guess was that they designed it to nudge-nudge-wink-wink to the requests of a Gen 4/5 P80 build which is not viable because of copyrights still in effect (Gen 3's copyrights are expired which is why P80 can do Gen 3s). Also might explain why they discontinued the CL line, if Glock caught wind of how easy it was to 101% the 80% to a Gen 4 model. Helpful video. I have 1 CL and it is in need of a new slide, so I might buy a Gen 4 slide and try your technique. Cheers!
Kevin Jackson Sr. You might need to do specific things for the Gen 5. I do know Tactical Toolbox has a video about how to convert Gen5 to Gen4 (remove ambi) but I’m not sure if trigger requirements are the same or different since the safety plunger is different. Based on his video I believe your frame internals need to be Gen4 which might pose an issue for the trigger housing group (Gen4/5 is larger than Gen3). This needs to be confirmed and reviewed with someone who has all three gens and can confirm. I would say until someone can confirm, plan to build the P80 separately and not use Gen5 parts.
CL frames are perfect for G4 G5 slide mod. 940C and V2 not so much. I did the mod couple years ago with the 940C and OEM G19 slide Gen4 . The rail blow apart in the first blm trip. I manage to glue on the two little strips of polymer that I cut out from the frame with some two part epoxy. So far still holding strong, no problems with hot round either. Probably CL where designed with dual compatibility in mind. Thank you.
READ THIS IF YOR WANT TO USE A GEN 4 SLIDE!!! At 7:11. I now know what they are talking about because neither of my Gen 4 slides (OEM and aftermarket) would fit down that channel without taking A LOT of material out, even with GEN 3 SPRING. So much material that the little grooves on the side of the frame are see-through. It just would never fit to fully to the rear unless I kept sanding the channel more and more and once started you aint going back. I wish I had just left it and gotten a Gen 3 slide as I'm pretty sure the frame is a set up to crack now. I think his works because it is the CL G17 frame with wider, reinforced channel. The V2 G19 I have won't work.
I thought the same too. I cut the entire rail section off just to see what would happen with the PF45 frame. Never had any problems in the 200 rounds sent downrange. I 3d printed a new rail section (siraya tech blu resin) for the PF45 with a lower rail section.
I shoot way better with a gen 4 recoil spring. I like this review because it showed me why I should use a gen 4 slide. I don't want a weaker frame. Thanks man 👍🏽
The only difference between the gen 4 17 barrel and the newer gen 3 17 barrel is the lug on the gen4 has a wider cut to accept the wider footprint of the newer gen4 guide rods. So since you could run a gen4 barrel in a gen5 slide, you could also run a gen3 barrel in that gen5 slide. I know gen 3 barrels fit in the 4 slides as the dimensions are essentially still the same. I just didnt know about the 3/4s in the gen5 slides, and you answered that question nicely.
P80 serialize g19 frames have more material on the walls and floor of the recoil spring channel. I think the guys saying you have to remove more material are referring to newer models.
Thank you for the informative relief and parts selection. Ordering up what I need now. This happy accident was due to deltateamtactical miss shipping me a gen 5 slide with my gen 3 parts kit. Now I need a gen 4 barrel and the spring bushing. Fortunately that allows me to get something threaded for my "in the mail" Deadair Wolfman. Thanks again.
Hey man. Awesome video. So helpful in this build that I’m trying to put together with spare parts laying around. I have the g19 p80 lower and a completely bare gen 5 g19 upper. Can I fill that gen 5 g19 upper with a gen 3 g19 slide assembly kit and a gen 4 barrel? Or do I need all gen 5 parts other than a gen 4 barrel and gen 3 spring like you mentioned in the video?
So do you still use gen 3 parts in your lower? Or are they all the same anyway? I know that the ejectors are different; and I know how to swap them... but otherwise, does a regular gen 3 parts kit (lower) work on the gen 5 slide upper??
This video is awesome. Now I have a question, has any ever tried modding a polymer 8 to except gen 5 internals? Wouldn’t you just need to drill 1 hole in the frame “in the right location” instead of 2 holes? I’m a lefty, and want to be able to use the ambi slide release.
Hey Brother thanks for the video helps out alot, a couple questions I purchased a Statement Defense Overbite Glock Slide w/Trijicon RMR Optic Cut Glock 17 Gen 4, are there any more mods needed to be done besides the removal of the extra material in the front you showed i.e. to the Lower parts that you assembly to the rest of the frame if not which lower parts kit are you running rails etc.and what trigger system are you using with the polymer 80 lower gen 3 with your gen 4 slide? Second question do you have any experience with modifying the 80% arms GST-9:MOD1, Pistol Frame to accept the Glock 17 Gen 4 slide to fit on that GST-9 frame? I know under their disclaimer it says does not accept Glock 17 slides. Thank you. Sam
Hear me out, the Poly80 PF940sc (G26) with an Gen 5 G19 slide using the gen 4 to gen 4 adapter from Lone Wolf as well as the reducer to accommodate the Gen 3 recoil spring. Thoughts?
I’ve got a Glock 23 Gen 4 complete slide on a Polymer 80 Subcompact frame (For the 27 or 26) and run the Gen 4 guide rod with spring and the only thing I added was the Lone Wolf dust cover adapter to take up and cover the space. Shoots like a champ. Now I use 27, 23 and 22 mags.
@@blackriveroutfitters7185 Sick. Thats enough to prove the concept to me. Seems to be the same idea but in .40 so in theory, doing the same in 9mm should be just fine.
@@billywhite6856 I’ve never held a Gen 5, but if it measures up like a Gen 4, you’re in business! I love building “Frankenstein Glocks”. Built several “Smith & Glockson’s” (P80) currently working on a Taurus Glock P80 combination that will be a Frankenstein Glock 43. 🙄😂🤣
@@billywhite6856 have video of the two SW9V P80 builds I did on my channel. Test firing them so people know it will work. I just completed a P80 SW40VE build today and the Taurus Glock P80 is almost finished. I’m just a bored old man that likes to try and build stuff. Lmao
On that final configuration you showed a gen 5 slide, with a gen 4 barrel and a gen 3 recoil spring with a reducer bushing, on a p80 frame with assumably Gen 3 internals. To be certain, couldn't one use a gen 3 barrel?
@@mp2103can one change the locking block on a Gen 3 frame to a gen5 locking block, to fit the Gen 5 Slide? Or is there No possibility to use a gen5 Slide on a Gen 3 frame?
Looking to make my own polymer80 glock. I have a gen 4 slide and great to know its an easy modification to make the slide fit. Do you run gen 3 lower parts kits on these P80 Frames with the Gen 4 Slide or do you need GEN 4 lower parts kits on these p80's to properly operate on a gen 4 slide?
Very cool man. Thanks for that. I assume all this info would be the same for using Gen 5 G19 slide on a Poly80 G19 sized frame? Just use 19 sized parts instead of 17 right?
Hey Johnathan Brand I have the same question as two others who asked, is it possible to run the ambi gen 5 slide locks with the gen 5 slide gen 3 recoil spring and bushing?
Has anyone figured out a way to get the Gen-5 barrels to work with the frame? Being able to use the new factory marksman barrels is really the main reason why I would want to try this. Otherwise, it's almost better to just mill the Gen-3 slide and leave the frame alone.
How can I learn how to get everything I need to put all the parts in the frame I really want to figure out how to do a frame and what tools I would need
So to run a glock 22 gen 4 would you have to still use a bushing along with a gen 3 recoil spring? Stumped on my build taking my time becuse it is a .40caliber.
Quick question I used the polymer 80 pf940cl frame with a glock 17 gen 4 slide with all gen 3 parts I have the adapter for the gen 4 slide to fit the gen 3 spring recoil but the spring recoil will not fit onto the slide that way any info on what I did wrong or need to do?
My question is this: Do you have all gen 3 frame parts, including trigger group, in that gen3-5 setup at the end? Or did you have to change anything out to be compatible with the gen 5 slide parts? I understand the gen 5 safety pin is angled differently to be smoother in trigger press, but heard mixed reviews on the function. Have you put rounds through the gen5 slide on gen3 frame?
@@mp2103 good deal. Thank for the video. Testimony with details is huge when considering multigen builds. Although trying to find certain parts to build is insane right now.
I wanted to run a Gen 4 Glock 20 slide on the PF45 but only my PF940CL has that inner channel rounded inside the front of the frame and I don’t want to weaken it and have the rails break off. So I got an aftermarket Gen 3 slide I’ll run. But I can put a Gen 4/5 slide on my PF940CL frame and never noticed it was already rounded out. So I’ll get a Gen 5 slide for it.
Just checked the clearances on my pf940c frame with my gen 4 slide. The inside of the frame has too much material for the front tang of the slide to cycle through. Just clearing out the very front like what you did on your 940cl won't work.
If I use a PF940CL with a gen 5 slide do I have to use 19 frame internals? Sorry if its covered in here but I'm just trying to get the basics and go shopping
THANK GOODNESS I FOUND YOU!
Same problem, but great solution!! I thought all that work that I put in on my very first build was a complete waste and have to buy another frame. Again, THANK YOU VERY MUCH! You definitely saved my sanity. OOORAH!!! 🙂
You had to make us all jealous with you P80 940CL collection huh? Haha. Thanks for the good content.
DTOM _1776 I just bought a 940V2 G17 I’m excited as it is going to be my first build.
DTOM _1776 yeah I don’t have a dremel press but I have a vice and a drill so I’m going to take my time to do the holes.
DTOM _1776 also I’m going to use a razor blade to do the tabs after the holes so that I have a nice flush cut to the frame and not much sanding.
DTOM _1776 sweet thanks for the heads up you think Harbor freight has some of those bits? I don’t have a woodcraft store.
DTOM _1776 yeah I’m not wanting to Fubar it so any advice I can get is great advice haha.
Another reason is I just picked up a g45 gen 5 slide for 100 bucks lol great video and I know how I'm building it now
Thanks for the video, I bought a Gen 5 slide to run on a P80 and your video answered my question about the G17 locking lug issue. I will probably run it on a PF940C frame with a gap filler and try to use the marksman barrel. Poi changes with different barrel gens..
I saw someone else comment and I will agree with their comment that this works because you’re using an Polymer 80 CL frame (Custom Long Slide). I would imagine if you are trying this with a P80 full-size or compact frame (None CL Frame) you will end up having to remove material in the channel as others have told you. Please do a video on that and let us know. I build as well, but I’m not jacking up frame just to see.......... 😂
So a few quick questions. Do you run the Gen 3 lower parts one the p80 frame and Gen 4 in the slide with a Gen 3 spring and bushing?
You can also run a Gen 5 19 or 45 slide on a polymer 80 26. Without changing anything. They both run the same spring. You just need that spacer thingy to cover the spring.
You’ve done this yourself, this is exactly what I’m facing now . I have. Gen 5 g19 slide and barrel . Would I still need to use a gen 4 barrel as he stated in his video?
@@lorenzohernandez4345 y’all foos ever find out
did you ever find the answer to your question? i have a gen 5 slide with all internals . am i going to need a gen 4 barrel?@@lorenzohernandez4345
I think the guys that commented on removing more of the frame is in reference to a P940V2 and P940C. The P940CL frames were made differently than the standard P80 frames, giving it a complete round inside the slide area after the nose which corresponds to the Gen 4/5 slide nose. The regular P80 full and compact do not have the full round, which means you will need to remove the interior of the slide area - not just the nose. My guess was that they designed it to nudge-nudge-wink-wink to the requests of a Gen 4/5 P80 build which is not viable because of copyrights still in effect (Gen 3's copyrights are expired which is why P80 can do Gen 3s). Also might explain why they discontinued the CL line, if Glock caught wind of how easy it was to 101% the 80% to a Gen 4 model. Helpful video. I have 1 CL and it is in need of a new slide, so I might buy a Gen 4 slide and try your technique. Cheers!
Yep, they're deff talking about doing that in a 940V2 or 940c. The CL takes it nice and easy
Great video i have a gen 5 slide and need to know all the parts you put in the P940V2 would reall like your help thx BaDmAn
Kevin Jackson Sr. You might need to do specific things for the Gen 5. I do know Tactical Toolbox has a video about how to convert Gen5 to Gen4 (remove ambi) but I’m not sure if trigger requirements are the same or different since the safety plunger is different. Based on his video I believe your frame internals need to be Gen4 which might pose an issue for the trigger housing group (Gen4/5 is larger than Gen3). This needs to be confirmed and reviewed with someone who has all three gens and can confirm. I would say until someone can confirm, plan to build the P80 separately and not use Gen5 parts.
So putting a gen 4/5 slide on a p80 p940v2 with just dremeling the opening like in this video won't work unless you're doing this for a p940cl?
I wish I read this before I took the dremmel to my P940C
CL frames are perfect for G4 G5 slide mod.
940C and V2 not so much.
I did the mod couple years ago with the 940C and OEM G19 slide Gen4 . The rail blow apart in the first blm trip.
I manage to glue on the two little strips of polymer that I cut out from the frame with some two part epoxy.
So far still holding strong, no problems with hot round either.
Probably CL where designed with dual compatibility in mind.
Thank you.
READ THIS IF YOR WANT TO USE A GEN 4 SLIDE!!! At 7:11. I now know what they are talking about because neither of my Gen 4 slides (OEM and aftermarket) would fit down that channel without taking A LOT of material out, even with GEN 3 SPRING. So much material that the little grooves on the side of the frame are see-through. It just would never fit to fully to the rear unless I kept sanding the channel more and more and once started you aint going back. I wish I had just left it and gotten a Gen 3 slide as I'm pretty sure the frame is a set up to crack now. I think his works because it is the CL G17 frame with wider, reinforced channel. The V2 G19 I have won't work.
I thought the same too. I cut the entire rail section off just to see what would happen with the PF45 frame. Never had any problems in the 200 rounds sent downrange. I 3d printed a new rail section (siraya tech blu resin) for the PF45 with a lower rail section.
Do you guys know if a Gen 4 G27 OEM slide will fit on a Gen 3 Poly 80 sc frame ?
about to try this on a v2 glock 22
I shoot way better with a gen 4 recoil spring. I like this review because it showed me why I should use a gen 4 slide. I don't want a weaker frame. Thanks man 👍🏽
The only difference between the gen 4 17 barrel and the newer gen 3 17 barrel is the lug on the gen4 has a wider cut to accept the wider footprint of the newer gen4 guide rods. So since you could run a gen4 barrel in a gen5 slide, you could also run a gen3 barrel in that gen5 slide. I know gen 3 barrels fit in the 4 slides as the dimensions are essentially still the same. I just didnt know about the 3/4s in the gen5 slides, and you answered that question nicely.
Excellent video thank you so much other videos talking about machining this machining that and ur video makes the most sense ty
Thanks for this. I'm currently getting ready to build on a p80 frame with a gen4 19 slide and barrel.
P80 serialize g19 frames have more material on the walls and floor of the recoil spring channel.
I think the guys saying you have to remove more material are referring to newer models.
Thank you for the informative relief and parts selection. Ordering up what I need now. This happy accident was due to deltateamtactical miss shipping me a gen 5 slide with my gen 3 parts kit. Now I need a gen 4 barrel and the spring bushing. Fortunately that allows me to get something threaded for my "in the mail" Deadair Wolfman. Thanks again.
Did you use the gen 3 parts kit for the gen 5 slide with exception of the spring and barrel with success?
Sweet! Great video. I put in a Gen 4 trigger housing in my build in order to use an Apex trigger. Works great! Might be a Gen 5 slide in my future.
Best video of its kind.
Great video dude, this is exactly what I was looking for
On the glock 19 --- the barrels are the same across all gen3, gen4, and gen5.... Glock 17 gen5 barrels are not compatible with the gen3/ 4.
This video made me subscribe!! Thanks bro
Thank I’m going to get a gen 4 slide now for my p80 17
Hey man. Awesome video. So helpful in this build that I’m trying to put together with spare parts laying around. I have the g19 p80 lower and a completely bare gen 5 g19 upper. Can I fill that gen 5 g19 upper with a gen 3 g19 slide assembly kit and a gen 4 barrel? Or do I need all gen 5 parts other than a gen 4 barrel and gen 3 spring like you mentioned in the video?
You need all gen 5 parts, except the slides springs.
Thanks alot for this knowledge man.👍
Perhaps grind down the wider Gen 4/5 recoil spring surface to Gen 3 width for a fit on regular P80 G17/G19 frames?
So do you still use gen 3 parts in your lower? Or are they all the same anyway? I know that the ejectors are different; and I know how to swap them... but otherwise, does a regular gen 3 parts kit (lower) work on the gen 5 slide upper??
My home team is the Mountaineers and I like P80 /G19 so had me from the start👍
This video is awesome. Now I have a question, has any ever tried modding a polymer 8 to except gen 5 internals? Wouldn’t you just need to drill 1 hole in the frame “in the right location” instead of 2 holes?
I’m a lefty, and want to be able to use the ambi slide release.
Nice video,very informative.I’m just sick and tired of RMR
Any idea if all of these same “workarounds” need to be done on a Gen 5 19 (or 45) slide and p80 compact frame??
Hey Brother thanks for the video helps out alot, a couple questions I purchased a Statement Defense Overbite Glock Slide w/Trijicon RMR Optic Cut Glock 17 Gen 4, are there any more mods needed to be done besides the removal of the extra material in the front you showed i.e. to the Lower parts that you assembly to the rest of the frame if not which lower parts kit are you running rails etc.and what trigger system are you using with the polymer 80 lower gen 3 with your gen 4 slide? Second question do you have any experience with modifying the 80% arms GST-9:MOD1, Pistol Frame to accept the Glock 17 Gen 4 slide to fit on that GST-9 frame? I know under their disclaimer it says does not accept Glock 17 slides. Thank you. Sam
This was fantastic.
Hear me out, the Poly80 PF940sc (G26) with an Gen 5 G19 slide using the gen 4 to gen 4 adapter from Lone Wolf as well as the reducer to accommodate the Gen 3 recoil spring. Thoughts?
I’ve got a Glock 23 Gen 4 complete slide on a Polymer 80 Subcompact frame (For the 27 or 26) and run the Gen 4 guide rod with spring and the only thing I added was the Lone Wolf dust cover adapter to take up and cover the space. Shoots like a champ. Now I use 27, 23 and 22 mags.
@@blackriveroutfitters7185 Sick. Thats enough to prove the concept to me. Seems to be the same idea but in .40 so in theory, doing the same in 9mm should be just fine.
@@billywhite6856 I’ve never held a Gen 5, but if it measures up like a Gen 4, you’re in business! I love building “Frankenstein Glocks”. Built several “Smith & Glockson’s” (P80) currently working on a Taurus Glock P80 combination that will be a Frankenstein Glock 43. 🙄😂🤣
@@blackriveroutfitters7185 lmao holy shit. you gotta let me know how that turns out!
@@billywhite6856 have video of the two SW9V P80 builds I did on my channel. Test firing them so people know it will work. I just completed a P80 SW40VE build today and the Taurus Glock P80 is almost finished. I’m just a bored old man that likes to try and build stuff. Lmao
Your the man bro! Subbed!
Really good Zacapa 23 rum back there
What internals did you use on the p80? I have a g45 gen 5 slide that I was to build out, thanks.
On that final configuration you showed a gen 5 slide, with a gen 4 barrel and a gen 3 recoil spring with a reducer bushing, on a p80 frame with assumably Gen 3 internals. To be certain, couldn't one use a gen 3 barrel?
You helped me sooooo much with this video
Glad to hear!!!
@@mp2103can one change the locking block on a Gen 3 frame to a gen5 locking block, to fit the Gen 5 Slide? Or is there No possibility to use a gen5 Slide on a Gen 3 frame?
This is a bad a$$ tutorial. Thanks man!
Very cool new to ur channel bud. I got a question I'm getting a budget polymer 80 glock 9mm choice but.....what do i get parts wise
Looking to make my own polymer80 glock. I have a gen 4 slide and great to know its an easy modification to make the slide fit.
Do you run gen 3 lower parts kits on these P80 Frames with the Gen 4 Slide or do you need GEN 4 lower parts kits on these p80's to properly operate on a gen 4 slide?
Gen 3 lower parts kit with the Gen 3/4 barrel in the Gen 4 slide and Gen 3/4 barrel in the Gen 5 slide. All the lower parts stay Gen 3
Mine DID NOT. See my other comment.
What gen parts are on the frame to make compatible with the gen4/5 slide?
Probably all Gen 4/5 with exceptions for shit like the trigger housing which won’t fit in a that frame.
very interesting! informative vid!
Very cool man. Thanks for that. I assume all this info would be the same for using Gen 5 G19 slide on a Poly80 G19 sized frame? Just use 19 sized parts instead of 17 right?
Larry Speck yep, same same.
Any info on what model poly80 from will work with a g19 gen5? What exactly is needed? Tia
@@Meek23638 it’s all the same. Gen 3/4 barrel and Gen 5 slide with Gen 3 lower parts
Do you see any issues running the G17Gen 4 frame with the same set/up, i think the dremel may not be necessary, thanks, Great Video!!!!
I don’t see there being any issue if you’re talking about the Glock OEM frame.
This is great your the man
Hey Johnathan Brand I have the same question as two others who asked, is it possible to run the ambi gen 5 slide locks with the gen 5 slide gen 3 recoil spring and bushing?
Has anyone figured out a way to get the Gen-5 barrels to work with the frame? Being able to use the new factory marksman barrels is really the main reason why I would want to try this. Otherwise, it's almost better to just mill the Gen-3 slide and leave the frame alone.
Cool freaking beans man!
Can I use a g flex gen 5 trigger for my p80? Or should I just use a regular trigger
How can I learn how to get everything I need to put all the parts in the frame I really want to figure out how to do a frame and what tools I would need
Could I use a gen 5 G20 slide ? on the G20/21 p80 Frames ?
Nice video, thanx
So to run a glock 22 gen 4 would you have to still use a bushing along with a gen 3 recoil spring? Stumped on my build taking my time becuse it is a .40caliber.
Did you use a compact p80 frame or full size p80 frame please answer.
Can you do a vid on the gst-9 frame gen 5 compatibility
Perfect. I was looking to build a g22 clone but the only slides I can find are gen 4.
did it ever work out brotha about to try myself
Have you tested a gen 4/5 magazine release on a gen 3 style frame.
Is it possible to run a 19 slide on the P80 full size lower and maybe just cut down the dust cover giving the 19x effect?
Quick question I used the polymer 80 pf940cl frame with a glock 17 gen 4 slide with all gen 3 parts I have the adapter for the gen 4 slide to fit the gen 3 spring recoil but the spring recoil will not fit onto the slide that way any info on what I did wrong or need to do?
My question is this: Do you have all gen 3 frame parts, including trigger group, in that gen3-5 setup at the end? Or did you have to change anything out to be compatible with the gen 5 slide parts? I understand the gen 5 safety pin is angled differently to be smoother in trigger press, but heard mixed reviews on the function. Have you put rounds through the gen5 slide on gen3 frame?
All gen 3 lower parts. Yeah I have several that run really well. Actually thinking about starting to carry one of my CL versions.
@@mp2103 good deal. Thank for the video. Testimony with details is huge when considering multigen builds. Although trying to find certain parts to build is insane right now.
Can I use a glock 23 gen 4 slide on a p80 lower with a gen 3 lpk?
Could you use the gen 5 ambi slide release with the combo of the gen 5 slide with the gen 4 barrel and gen 3 recoil spring?
I have a G22 gen 4 slide, what do I need to make it work on a polymer 80?
trying to figure this out any help?
Can you put a 19 slide on the 17 size grip with the P80? I want to build a Glock 45 (model not that caliber)
wisch compoensator you show in the first one?
What if I want to clear a wider channel for a gen 4/5 recoil spring? Is there anything wrong with that?
Can we get a list of pasts you used on the lower
You usually can get them in a kit all together
wait so whats the difference from a Gen5 slide and a Gen 3 slide? they look the same besides the engraved letters?
What about Ambi or reversible controls on a Polymer 80 frame?
Lefty shooters what to run these kits too.
So I can buy a p80 frame and use a Glock gen 3 slide and it will slide into place? Perfectly?
Is this with a regular parts kit or i gotta get anything special for the gen 5 pls help
What about the barrel do i need a gen 5 or gen 3 barrel for my gen 5 slide on gen 3 frame?
I'm a bit confused does this work on the PF940v2 or is it a different frame?
Are the Gen3 and Gen4 barrels/cutouts the same anyone know? I have a polymer80/gen3 barrel and want to run my gen5 slide
Hello Is it possible to do this process on a g19 p80 frame? I have a gen 4 glock slide that I want to put together with a p80 lower.
Any updates in 2023 does it holds ?
What trigger components are you running on it?
Thanks
I kinda wish I'd seen this before I'd completed 9 Poly 80s
Would this also work for the grey ghost precision frames???
do you have to change the back plate
How to run Glock 19 slide firt gen on p80 frame
I just bought a P80 slide for a Glock 26. I've seen people use a Glock 19 slide on this frame. Could I use a Gen 5, Glock 19 slide with this frame?
I haven’t tried that particular combo but I would assume with a GEN five slide and Gen 4 barrel it should work.
How did u have a comp on that slide without a barrel
Old school strike comp. bolts to a guide rod insert
Could I do this with a gen 3 frame? Have an extra frame with all internals
Do you know if the glock 43 gen5 slide fit with pf9ss
I wonder if the process is the same for a P80 large 45/10 Gen 3 frame and a Gen 41 model 5.23” slide.
I would assume but being a hardcore 9mm guy, i havent built one so I couldn’t say for sure.
@@mp2103I’m trying to try this build out gen 5 slide on a p80 Large frame for g20/21 Not sure if it’s worth it
can I use a gen 5 slide with a gen 3 barrel?
I wanted to run a Gen 4 Glock 20 slide on the PF45 but only my PF940CL has that inner channel rounded inside the front of the frame and I don’t want to weaken it and have the rails break off. So I got an aftermarket Gen 3 slide I’ll run. But I can put a Gen 4/5 slide on my PF940CL frame and never noticed it was already rounded out. So I’ll get a Gen 5 slide for it.
Have you tried running a gen 5 g20 slide ? I’m trying to find out if it’s worth it
Are you running a gen 5 trigger as well?
You can get all those features from zaffiri precision for a gen 3 slide
OEM slides tend to run a lot smoother on P80 frames.
What size reducer bushing is that?
Will a Glock 31 gen 4 work on my polymer 80
Think I can run a glock 45 slide on a 19 P80 frame?
What comp is that?
Just checked the clearances on my pf940c frame with my gen 4 slide. The inside of the frame has too much material for the front tang of the slide to cycle through. Just clearing out the very front like what you did on your 940cl won't work.
Yeah. The 940c has alittle more material. That was discovered after this video was made Just requires alittle more time and test fitting.
Where do you get the spring to work on gen 4 or that little tool you put on the end of the spring what’s it called ?
I think its a gen 3 to 4 adapter. Or reducer
👍👍
How’s it running for you? I’ve been thinking about throwing my gen 5 17 slide on an 80% 19 frame for a minute here.
Shoots great. Actually this one is the best running P80 I have. Didn’t have to mess with it or tweak it at all. It just ran.
If I use a PF940CL with a gen 5 slide do I have to use 19 frame internals? Sorry if its covered in here but I'm just trying to get the basics and go shopping
Gen 3/4 barrel. Gen 3 lower parts.