GE dryer not starting making loud buzzing noise testing for bad motor
HTML-код
- Опубликовано: 10 сен 2024
- GE dryers are one of my least favorite brands of dryer because of the front plastic bearing that always goes out. If your dryer is making a grinding noise while it is running normally that means the front bearing is probably starting to go out and if you replace it soon it will probably not burn the motor up like this. Please feel free to ask any questions and the comments below thanks for watching.
Affiliate links
3 easy steps to finding the right part that will “Actually fit”
1. Go to bit.ly/3mfgdDi
2. Enter the model number of your machine in the search. (You’ll find Your model number on a sticker inside the door)
3. All the parts that will fit your machine will appear. Just scroll down until you see the part you need.
If you prefer using Amazon please use my affiliate links below, It really helps the channel.
G.E Dryer front Bearing Kit plus belt and slides. amzn.to/3mhtCux
GE motor. amzn.to/3gl26IL
Dryer Rear Drum Bearing Kit. amzn.to/3AXP2kE
Belt 89” 1/2 ge dryer. amzn.to/3gin9vL
Heating Element full Assembly amzn.to/3813s6Z
Restring Dryer Heating Element Coil amzn.to/3gh0eAM
Lint Dryer Vent cleaner Vacuum. Hose amzn.to/2XyB1ey
My GE dryer is doing the exact same thing. I use to build speed queen washers and dryers for 14 years. Never a dull moment.
Yep, same noise here. Thanks for the information.
Thank you for actually letting me hear the problem. Keep up the good work!
Thanks for the insight. I took mine apart and cleaned LOTS of lint out. It works perfectly fine now.
Glad it helped
Thanks for the content. Exactly what's up with mine. Although it's a Hotpoint it's the same.
Thank you for your help and info.. New dryer it's...
Glad to help
this really helped me out man thanks
Mines make that noise after it's been running for about 30 to 40 min then it makes a loud humming sound
Same here, did you figure it out?
Mines making a loud humming noise but it's spinning
preciate the advice. well done!
Thanks
Thanks, this is just what I needed to know!
My dryer makes the humming noise when I hit start but when I reached inside and tried to spin it’s like it stuck and hard to spin. I don’t see two screws in front look inside tho
I would say either the motor is going out or something else in the fan or the belt is off track.
My Kenmore hummed yesterday, bought 3 today and they all him like my original does. Hired an electrician to come by tomorrow. Has to be something in my wiring that suddenly happened.
Yeah that’s definitely not a coincidence if they’re all doing it. Let me know what was wrong.
Dryer buzzes like the job is done every time I try to start a new load. Won't start a new cycle. What could be the problem?
How do I replace a good found out my mother on my dryer is making that sound that you some how do I replace it before I don't have to get a new one
If it’s week and Buzz usually that means bad motor.
Do you show the bad bearings in another video or if anything was stuck otherwise?
There's no start capacitor that can be replaced on these?
I don’t think so.
The GE ones don't have a start capacitor. Instead they have an additional start winding and uses an inertia switch which toggles off the start winding and provides the power feedback to keep it running. If that switch is damaged you'll get this exact Behavior or possibly it will start but only run while the start button is pushed down.
How do you get that belt off?
Oh ge dryer are one of the harder belt to get on and off. It definitely helps to have skinny arms :-)
Like my mother is going out of my dryer how do I fix it
Usually when they’re going bad there’s not much to do besides replace them.
Remove the motor, clean it and most likely it will work again as mine did. Save your money.
Like the new video
Thanks
disappointed no real process just talking?
Well it didn’t say fix in the title