I still have the savage x 4.6 from many years ago, fully upgraded, everything got reinforced in the time, even has a nice pink thick plate to protect the fuel tank. In my case, the 3 speeds and the reverse worked without a problem, oh boy, and the Futaba 3PMX worked like a charm!! I left the hobby nearly 10 years ago because of university but I cannot get rid of my cars, too many good memories. The engine in the new one sound exactly the same as mine did even if if was the 4.6 (with pink anodized fins if I”m not mistaken), haha, i still remember the thick zip ties that we had to use to protect the engine. This has brought back so many good memories, thank you.
Hi Kev I just got my first nitro car for Christmas!!!! I just wanna say thank you for teaching me all the tips and tricks, without your channel I wouldn’t be in this hobby or know or these tricks thanks Kev ❤
Excellent review. It’s criminal they use such cheap materials given the amount these cars cost. You test wasn’t even that extreme. Thanks for giving us something to watch on Boxing Day!!
If this still your best rv nitro basher?? Cuz I’m looking to buy my first and only to join my collection I have a hoss and trx and getting a Xmax, xrt or arma fireteam I can’t decide on those yet if u can help me on that as welI love the e brake feature of arma but traxxas is traxxas lol but back to nitro can u get me a few to choose from or this being the best I’ll just choose this one but I wana get my collection finish for now til they payed off hehe 😜 😈
It’s about being treated as though it were a 13k dirt bike… the electrics break as well doing such. It’s like actually as advertised. View my other comment. You need to love the idle scrww
Little tip for tuning bud start it out on the factory settings then start leaning it out 1/4 turn at a time until you get the throttle response and rpm and make sure it’s still Smokey usually don’t have to mess around with the low speed needle to much but maybe lean it out a tiny bit however be careful as this is far more sensitive than the high speed needle don’t forget you will have to go back and adjust your idle rpm screw until you get a nice idle speed as far as your shifting issue I don’t think it was hitting enough rpm to shift up if I’m honest the savage sounds to rich still hope you had a good Christmas buddy 🤙🏻
Can't believe these came out 20 years ago! I was 12 years old and was set on the tmaxx until the savage came out and I had to have one. I don't remember a time I took it out that I didn't break something and I quickly learned to only buy a brand that your local hobby shop actually stocks parts for lol. I spent a lot of time waiting for parts in the mail!
Gotta have one eventually! Best RC I've ever had was my old savage 25. 12 gallons of 30% nitro before the original engine finally got tired lol. One diff, one set of brake pads, one shock shaft is all I ever had to repair or replace on that truck. Shame about the monkey metal ring gears. At least they do have machined gears available. When I get one I'll go over it good and get linkage adjusted and double check all screws before I fire it up. Might even do the diff's preemptively with the machined gears to eliminate that potential issue. You should check out the new Vorza S line. I just got the truggy and it is built right. 4mm 7075 chassis, 7075 shock towers, 7075 hinge pin braces etc etc. Handles and jumps flipping amazing.
Hey kev, I got a Traxxas E-revo 2.0 ORANGE for Christmas and ITS FAST! At the moment I have to be very careful because I'm driving it in my house's hallway/ living room. I even managed to do a Huge wheelie in such a small area! 😅 Happy Christmas kev! 😀🎄
my flux hp suffers from the rear links breaking, steering servo stripping even with servo saver, wheels stripping due to small wheel nuts, and wheels coming loose. when its working though its a beast.
Hope you had a fantastic and magical Christmas Kev! Love the nitro content! My goodness, that new savage body is so ugly. 😂 I love the savage, but they could have put more time into a scale-looking body. Damn you, HPI! lol
He said it perfectly I've had several nitro cars there great when they run!!! Properly don't do so great In winter always need tuned and gets oil everywhere electric Is just so much more simple.
I LOVED my savage xl. It had crappy diffs and I could never get it to run right, but I still loved driving it. I bought 2 xl's, 2 savage flux and a savage xs. They were a great truck! I'd probably get a new one.
I think that the reason some sintered metal gears last and others don’t is due to the hardening process. If sintered metal gears are too hard they break. I’ve had a lot of problems with sintered ring gears in my Redcat Wendigo (great truck otherwise) so I replaced them with Traxxas TRX-4 machined gears (some modification required 😂)
Love the nitro content! Shame about the dif metal. Would you consider running a Jato sometime? No pressure, as you’ve already said you’ve got so many trucks.
Awesome Nitro on Kevs channel 🎉. Low speed seems a bit lean in the basketball court. Richen it up a 1/4 turn. I agree a RTR should be just that and not have many issues (engine knowledge and tuning aside). Get her fixed up and bash it again 🔥💪🏻 hope you did a proper break-in 😂 Thanks for the vid
Alza racing upgrades are a must for this platform. I replaced my entire suspension with Losi arms,hubs, CVDs. The bulletproof diffs are a needed upgrade as well. They can be made bulletproof just need $$$ and time, like most things.
Kevin i honestly think with all your clout, money and experience you should make a RC basher car brand that has all your ideas. Kind of like what Novritsch did to Airsoft. He developed great out the box airsoft stuff.
The savage was my first rc car and I raced it for a number of years mine was the original gen1 which I still have although it’s in bits. Might have to buy this new one now.
Alex kowaliuk here I love nitro cars but when you can only buy one every now and then I recommend brushless. But when the nitro is running they are the best in my opinion.
I just got a axial scx10 III for Christmas and I haven’t gotten to play with it because we don’t have an adapter for Traxxas batteries but it looks ABSOLUTELY EPIC!!!
I had an issue breaking my diff gears several years back when I converted my Savage 21 to electric. The stock gears are pot metal and I think they make sintered gears which is just hardened pot metal gears. I broke them all really quick with the electric power. I think Hot Racing makes hardened spiral cut gears for these trucks.
Nice video. 2 or 3 speeds in offroaders imho are really, really problematic. On a road car they usually work perfectly, but most rc companies shy away/run away from using 2 or 3 speed transmissions on offroaders,and to me it seems they have good reasons for it. When jumping the transmission will probably shift into 2nd or 3rd,but when landing that creates quite the impact. Also, the amount of moving parts in even a 2 speed transmission just beggers belief. You've got a solidly mounted gear, flyweights,springs , adjustment grub screws, bearings and a 2nd gear with a oneway bearing connected to the same shaft the 1st gear runs on, all subjected to wear and shockloads, and with a 3 speed you have the whole shebang times 2. And I know from my HPI Buggy and HPI Truggy that with a good motor (Novarossi's on both of them) they are plenty fast enough for having fun, and plenty torquey enough to break diffs with just a 1 speed transmission.
never had any issues with two speed transmissions only problems I've had were with the revo transmissions reverse mechanism and the small servo constantly stripping or shorting out
More on this kev would like to see modded engine and some more upgrade dno about everyone else but I love the upgrade videos and I'm sure I'm not the only one
Brings back memories. I use to run a HPI road car and a RC10 Team Associated truck. Both nitro. Many a nights was spent on my kitchen floor stripping and rebuilding. How about building a twin engine Nitro?
I got a Zircon SS-TPC nitro car when I was a kid, similar design as this. I stoped using it as many parts broke and I couldn’t find alternatives. Do you have any idea what parts might fit?
Hey Kev love your videos! Could you make an rc drifter cause that would be epic? I am building one right now and I would love to see you have a go at it. BTW hope you had a great Christmas!😃
My first ever nitro was the original savage..had no clue what I was doin.. dad went to work and I wanted to play he said on phone if you can get it started go for it son.. sooo as a 10 yr old I got to work, I got it started all right, and it was instantly a "run away" stuck at full throttle.. we lived in a mobile home, it went as soon as it fired and hit the wall, and proceeded to literally climb up the wall and land on the roof upside down🤣 it ran for like 5 mins at full on the roof before it died.. dad got home, fished it off roof and we sold it for 50 bucks..lmao
Merry Christmas Kev! Love this and im a massive nitro fan but cant help wondering how long nitro will still be around :( Brushless has taken over in recent times! Less maintenance, no engine tuning and ease of use make electric the go to these days which is a shame as nitro is special! Shame but its the truth. Nitro is dying! Enjoy it while we can! Cheers mate! 👍
You gotta love Kev's - 'un-boxing' - nitro cars. Up-the-chuff with his - 'power tool' improvised starter. No oil-or-fuel - dry from the - 'get go' - and - 'give it the beans'. 😜 God bless you Kev. 🙏
Love my old savage. Just got it out of storage and may have to see if I can do some of the new upgrades. It was beefed up big time with carbon side plates and loads of alloy.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Hope you all had a great Christmas!!
love your vids kev!
You too!!
Hope you did too Kev! I got an X-Maxx!
Yeah i got a traxxas e revo.
You too kev!
I still have the savage x 4.6 from many years ago, fully upgraded, everything got reinforced in the time, even has a nice pink thick plate to protect the fuel tank. In my case, the 3 speeds and the reverse worked without a problem, oh boy, and the Futaba 3PMX worked like a charm!! I left the hobby nearly 10 years ago because of university but I cannot get rid of my cars, too many good memories. The engine in the new one sound exactly the same as mine did even if if was the 4.6 (with pink anodized fins if I”m not mistaken), haha, i still remember the thick zip ties that we had to use to protect the engine. This has brought back so many good memories, thank you.
Hi Kev I just got my first nitro car for Christmas!!!! I just wanna say thank you for teaching me all the tips and tricks, without your channel I wouldn’t be in this hobby or know or these tricks thanks Kev ❤
Excellent review. It’s criminal they use such cheap materials given the amount these cars cost. You test wasn’t even that extreme. Thanks for giving us something to watch on Boxing Day!!
To think I've been considering getting one of these at $700
@@fartdonkey8290 I bought one I soon as it was released in the UK, done one proper bash so far and been modifying since, almost ready to go now ahha
If this still your best rv nitro basher?? Cuz I’m looking to buy my first and only to join my collection I have a hoss and trx and getting a Xmax, xrt or arma fireteam I can’t decide on those yet if u can help me on that as welI love the e brake feature of arma but traxxas is traxxas lol but back to nitro can u get me a few to choose from or this being the best I’ll just choose this one but I wana get my collection finish for now til they payed off hehe 😜 😈
It’s about being treated as though it were a 13k dirt bike… the electrics break as well doing such. It’s like actually as advertised. View my other comment. You need to love the idle scrww
LOVE the nitro content, more please! Also please do a nitro off road build!
Me too!!!!!!!!!
Good to see the Nitro's for a change.
All the best Bud.
I had the 5.9 xl for about 10 years and loved it. I will now be getting another!! Great video
Omg watching kev with nitro is so funny I feel the same feelings🤣 because I’m not that mechanically inclined but I’m into nitro!
Take a 2 stroke rc then 😉
No mess just pure fun
That thing sounds awesome! Great bash brotha 🤙🤙🤙
Little tip for tuning bud start it out on the factory settings then start leaning it out 1/4 turn at a time until you get the throttle response and rpm and make sure it’s still Smokey usually don’t have to mess around with the low speed needle to much but maybe lean it out a tiny bit however be careful as this is far more sensitive than the high speed needle don’t forget you will have to go back and adjust your idle rpm screw until you get a nice idle speed as far as your shifting issue I don’t think it was hitting enough rpm to shift up if I’m honest the savage sounds to rich still hope you had a good Christmas buddy 🤙🏻
Merry Christmas to you and your family in England! Cheers and thank you for another year of great and informative videos. See you in the New Year!
This was my favorite dream truck I always wanted growing up. Keep us posted on the mods you do for this new one Kev so I can build one next Christmas!
Save yourself the heartache and buy something else
Not a good rc lol
@@jwoodhead345 terrible 😂
Today is my birthday and this the best video I could’ve watch for my birthday 🙏🏻🙏🏻🙏🏻
Thank you Kev🙏🏻🙏🏻
Can't believe these came out 20 years ago! I was 12 years old and was set on the tmaxx until the savage came out and I had to have one. I don't remember a time I took it out that I didn't break something and I quickly learned to only buy a brand that your local hobby shop actually stocks parts for lol. I spent a lot of time waiting for parts in the mail!
Kev!! We need more videos on the UDR! You haven’t posted that in ages!!!!!!!
My first rc was an HPI RS4 MT i loved that thing!!!
Thanks for the video Kevin always looking forward to an upload. Hate when I get a new rtr that needs work after the first run.
I love ur videos kev I’m an OG
Same
Thanks for the video Kev. Merry Christmas bro.
Hi Kev , great video ,shows all that's good a d bad about R,c Cars , great fun to see , the best channel going ,BOOOOOOOOOOOOM
😄😆When it Farts it's Loud!!!😅🤣😂😂
Thanks for the honest review 💪🏼
2 mins into vid and taking bets on what will break 1st 🤣🤣🤣
Gotta love Kevin's no nonsense real world testing 💯👍
The sound of a savage never changes!
Great review as ever Kev. That monkey metal gets everywhere. I've changed 3 diffs in my Legend race car this year for the same reason.
Gotta have one eventually! Best RC I've ever had was my old savage 25. 12 gallons of 30% nitro before the original engine finally got tired lol. One diff, one set of brake pads, one shock shaft is all I ever had to repair or replace on that truck. Shame about the monkey metal ring gears. At least they do have machined gears available. When I get one I'll go over it good and get linkage adjusted and double check all screws before I fire it up. Might even do the diff's preemptively with the machined gears to eliminate that potential issue. You should check out the new Vorza S line. I just got the truggy and it is built right. 4mm 7075 chassis, 7075 shock towers, 7075 hinge pin braces etc etc. Handles and jumps flipping amazing.
Hey kev, I got a Traxxas E-revo 2.0 ORANGE for Christmas and ITS FAST! At the moment I have to be very careful because I'm driving it in my house's hallway/ living room. I even managed to do a Huge wheelie in such a small area! 😅 Happy Christmas kev! 😀🎄
Always had nitros in late 90s and through to late 00s. Got an Xmax and never looked back. My nitro days are over and this vid confirmed that 😂
Merry xmas from Australia 🇦🇺 ❤️ kev🤘🏻🤘🏻
Love your content, kev, keep u the awesome work!
Kev running his rc gasoline car 😂His neighbours what is he doing now 🤨
Im dead inside now 😂
Merry Christmas and Happy New Year Kev! 🎆
my flux hp suffers from the rear links breaking, steering servo stripping even with servo saver, wheels stripping due to small wheel nuts, and wheels coming loose. when its working though its a beast.
Merry Christmas Kevin!!!!!
This brought back a lot of memories.
Tuning a Nitro car was the whole reason I quit driving it. I felt like I was spending more time trying to get it to run than actually driving it.
Staying with my xmaxx... thanks for the vid!
Kevin:Oh It’s Christmas every day! Me:yes
Merry Christmas Kev 👍
Hope you had a fantastic and magical Christmas Kev! Love the nitro content! My goodness, that new savage body is so ugly. 😂 I love the savage, but they could have put more time into a scale-looking body. Damn you, HPI! lol
I don’t know how you always find a way to entertain me
I like the look, and the way the suspension is and the way it sits!!!!!
The new body is amazing! Ive also ordered it to my old X 4.6. Pls more Savage- Videos.
It’s always a great day when Kev uploads!
He said it perfectly I've had several nitro cars there great when they run!!! Properly don't do so great In winter always need tuned and gets oil everywhere electric Is just so much more simple.
HPI making some good nitros. Looks like with any RTR needs some going over to get it all dialed in.
I wish they would go back to kits. I hate RTR.
Definitely love the look of the new Savage. Think I will stick with brushless.
The channel I like the video before I watch because they’re all awesome.
You have my jacket! Ororo! Heat is nice.
first again ! i started youtube thanks to you dude ! keep it up !
I LOVED my savage xl. It had crappy diffs and I could never get it to run right, but I still loved driving it. I bought 2 xl's, 2 savage flux and a savage xs. They were a great truck! I'd probably get a new one.
Does anyone else find themselves looking for a new KT video everyday!? Always a treat.
Yes I do too
Amazing Christmas haul! Got an SCX-24, a trail truck, and a TT02-B Neo Scorcher!
And now it really is christmas! 😀
Ah, this is best Nitro Sound!
Merry Crimbo kev 🤟💯🇬🇧❤
Primeira vez que vejo alguém dando a partida no motor dessa forma,genial!
Happy Christmas Kev!!!! It's the one day where you can just say "It's Christmas TODAY!!" Lol 😆😂😆
I think that the reason some sintered metal gears last and others don’t is due to the hardening process. If sintered metal gears are too hard they break. I’ve had a lot of problems with sintered ring gears in my Redcat Wendigo (great truck otherwise) so I replaced them with Traxxas TRX-4 machined gears (some modification required 😂)
Merry Christmas Kev! May God bless you with a wonderful new year.
Merry Christmas to you also Kev
Love the nitro content! Shame about the dif metal. Would you consider running a Jato sometime? No pressure, as you’ve already said you’ve got so many trucks.
Awesome Nitro on Kevs channel 🎉. Low speed seems a bit lean in the basketball court. Richen it up a 1/4 turn. I agree a RTR should be just that and not have many issues (engine knowledge and tuning aside). Get her fixed up and bash it again 🔥💪🏻 hope you did a proper break-in 😂 Thanks for the vid
Alza racing upgrades are a must for this platform. I replaced my entire suspension with Losi arms,hubs, CVDs. The bulletproof diffs are a needed upgrade as well. They can be made bulletproof just need $$$ and time, like most things.
I had the brushless Flux version years ago. I converted it to the XL chassis, it was fun truck and never really had many problems or breakages.
Merry Christmas to you as well.
Merry Christmas Kevin
Brilliant video as always kev, Mine too is stuck in gear aswell.
Kevin i honestly think with all your clout, money and experience you should make a RC basher car brand that has all your ideas. Kind of like what Novritsch did to Airsoft. He developed great out the box airsoft stuff.
Yeah was thinking the same
Ahhhh, I hope you can fix the 3-speed. On the Kyosho the 3-speed works actually really good. Merry Christmas to you! 🎄
The savage was my first rc car and I raced it for a number of years mine was the original gen1 which I still have although it’s in bits. Might have to buy this new one now.
Alex kowaliuk here I love nitro cars but when you can only buy one every now and then I recommend brushless. But when the nitro is running they are the best in my opinion.
I just got a axial scx10 III for Christmas and I haven’t gotten to play with it because we don’t have an adapter for Traxxas batteries but it looks ABSOLUTELY EPIC!!!
I had an issue breaking my diff gears several years back when I converted my Savage 21 to electric. The stock gears are pot metal and I think they make sintered gears which is just hardened pot metal gears. I broke them all really quick with the electric power. I think Hot Racing makes hardened spiral cut gears for these trucks.
Nice video.
2 or 3 speeds in offroaders imho are really, really problematic.
On a road car they usually work perfectly, but most rc companies shy away/run away from using 2 or 3 speed transmissions on offroaders,and to me it seems they have good reasons for it.
When jumping the transmission will probably shift into 2nd or 3rd,but when landing that creates quite the impact.
Also, the amount of moving parts in even a 2 speed transmission just beggers belief.
You've got a solidly mounted gear, flyweights,springs , adjustment grub screws, bearings and a 2nd gear with a oneway bearing connected to the same shaft the 1st gear runs on, all subjected to wear and shockloads, and with a 3 speed you have the whole shebang times 2.
And I know from my HPI Buggy and HPI Truggy that with a good motor (Novarossi's on both of them) they are plenty fast enough for having fun, and plenty torquey enough to break diffs with just a 1 speed transmission.
never had any issues with two speed transmissions only problems I've had were with the revo transmissions reverse mechanism and the small servo constantly stripping or shorting out
I wanna see happy Kev running again this fixed Savage🙂🌞💯 Hope to see the continue soon))))🥳🛻💨
More on this kev would like to see modded engine and some more upgrade dno about everyone else but I love the upgrade videos and I'm sure I'm not the only one
I’m glad you do this now I know not to waste my money lol thanks kev
FIRST!
Edit: Genuinely enjoy your vids Kev! Happy bashing!
Hi Kevin I love you're vids and I have been trying to find RC cars like yours I just like RC cars
Thought that tyre squeal was a sound effect to begin with 😂
What's the main difference between this one and the traxxas Xmaxx 8s??? Which one should I start with if I've never had any rc car like these ones?
I hope kevin says today "OWW IT'S CHRISTMAS YESTERDAY" 😂
Merry Christmas
First!!
I had one of the original savages back in the day only issue I really had was the one way bearing going in the starter bitty
Very professional body cutting😂
Merry Christmas 🎄🎄
Brings back memories. I use to run a HPI road car and a RC10 Team Associated truck. Both nitro. Many a nights was spent on my kitchen floor stripping and rebuilding. How about building a twin engine Nitro?
I got a Zircon SS-TPC nitro car when I was a kid, similar design as this.
I stoped using it as many parts broke and I couldn’t find alternatives. Do you have any idea what parts might fit?
Brand new truck and rips a hole in the roof lol to funny 😂🎄🎅👍
i would love to see an axial yeti xl thats been upgraded kevin.......plz plz make one! love your work
Hey Kev love your videos! Could you make an rc drifter cause that would be epic? I am building one right now and I would love to see you have a go at it. BTW hope you had a great Christmas!😃
Haha reminds me of my tmaxx from when I was a kid. Super fun but man were they a pain when it was cold outside
Muito legal esse carro e seus vídeos são incríveis!
My first ever nitro was the original savage..had no clue what I was doin.. dad went to work and I wanted to play he said on phone if you can get it started go for it son.. sooo as a 10 yr old I got to work, I got it started all right, and it was instantly a "run away" stuck at full throttle.. we lived in a mobile home, it went as soon as it fired and hit the wall, and proceeded to literally climb up the wall and land on the roof upside down🤣 it ran for like 5 mins at full on the roof before it died.. dad got home, fished it off roof and we sold it for 50 bucks..lmao
Merry Christmas Kev! Love this and im a massive nitro fan but cant help wondering how long nitro will still be around :( Brushless has taken over in recent times! Less maintenance, no engine tuning and ease of use make electric the go to these days which is a shame as nitro is special! Shame but its the truth. Nitro is dying! Enjoy it while we can! Cheers mate! 👍
Hi Kevin Talbot how it going great video like the traxxas good run too look out for my new unboxing coming soon 😀😊
The doctor will see you now 🔥
You gotta love Kev's - 'un-boxing' - nitro cars. Up-the-chuff with his - 'power tool' improvised starter. No oil-or-fuel - dry from the - 'get go' - and - 'give it the beans'. 😜
God bless you Kev. 🙏
Love my old savage. Just got it out of storage and may have to see if I can do some of the new upgrades. It was beefed up big time with carbon side plates and loads of alloy.