@@mikemanzo9673 funnily enough, I was handed my brothers savage that has sat in his garage for approx 10 years. Stripped the whole thing down and rebuilt it. Took it out for the first time today for tuning. It went like stink lol.
The Paradox Yahh I’m on the brake in process now to for some reason it idles fine but as soon as I hit the throttle it shuts off , idk maybe it’s running to rich have to tune it still
I agree..,.this is a really good tuning video, Not many will show lean conditions like they did. One thing they glossed ovr was idle settings. 1. Do everything noted up to 17:25 2. What should happen is after some HS runs and letting it go to neutral, you'll hear the engine two-stage. By that do a HS run and let it go to neutral, Count how long it takes before the RPMs DROP. Typically in this state they wil drop pretty quickly. 3. Lean the LSN 1/8 and do a HS run. The time it takes for the RPMs to drop should INCREASE. 4, Repeat #2 above until the engine takes 12-15 seconds before dropping. It wil be a high idle,,.but a consistent one. 5. Once you have a consistent, high idle...simply lower the idle. Give it a try even if you are just re-tuning. I have vids of it for anyone that wants to see it.
I just unearthed one I had in the garage since 2008. It's a wreck but now I'm so excited to get in running again. I think the servo died and I just neglected it.
Dang, I wish youtube was around when I initially went into this hobby. I have since changed over to electric. Good vid! Now I want a nitro kit again, Thanks!
The biggest take away for me displayed in this video is the fact people use gloves to handle all these chemicals. I am screwed, and the air filters are super huge now. I still love the sound and smell of nitro though. So what do you all recommend? I have always ran Traxxas kits, but this thing looks pretty cool. I just got back into RC last year, a lot has changed, the tech especially. Got a MERV last year, just to scratch the itch. I dig it, however, I always want MOAR!
@@jamesandonian7829 I'd say electric is good for starters tbh cause they aren't as powerful and normally aren't as fast but if you want a challenge go for the nitro cars and tuning and maintaining them is fun but also very annoying at times
Glad I found this, I have an old Savage 21 barely used... Just got it back out gave it a good clean and hoping to get some used out of it... Haven't got the dvd with all this on anymore though
Excellent video, very nice section about setting up the carburettor, not shown in many RC videos on RUclips . 2021 and I still the savage is probably the best 1/8th scale monster truck on the market. I have two, 1savage 25 & 1 saavage X 4.6. Just wish part here in the UK where easier to come by.
I keep flooding the engine on first start, not actually got my Savage XL K5.9 going yet. But this tutorial is brilliant, going to try all this again and follow it to the "T" except it is slightly different for the XL... Would be nice to see an XL version of this. Although the principles are the same, the settings are slightly different.... Thanks for this HPI. More please!
You move the high speed needle in 1/8 turns clockwise,to tune the cars top speed will increase once the top speed does not increase you will about have the hsn adjusted then after that do the low speed needle the same,if it does back the needle off
Yup. I have several HPI cars. My Mini Nitro was stored for at least 15 years and after a quick tear down and cleaning of the engine, it fired right up and runs like new. I store my cars with after run oil and I wrap in Saran wrap. Then place in a plastic sealed bin.
Nice! I'm having issues starting mine after few years right now. Can't get fuel from tank through the line with blocking the exhaust and pull start. When I drop some fuel removing the glow plug it did start for few seconds. Still no fuel running through the line. I was never an expert at this. Lol.
Try some fresh fuel tube. It could be blocked with old fuel. The same applies to the needles. Take the carb needles out and clean them with some fresh fuel. Reset to factory settings and start from there.
yes, i read in a mag that the company started in usa, (so the brand is USA), they have smaller outlets all over, europe, japan, china. thats what it said in a rc mag i get anyway.
Im here on 4/20 in 2024 all stoned finally put the engine back in my rig after converting it to drill start, and my drill is too weak hahaha. So close now
i didnot follow any of these instructions when i bought it but its as good as this one i think they did that at the store and also tuned it becuase they said one more hour
For the Savage 25 can we set the low speed and high speed flush with the top for default setting as shown in this video? I’ve had my Savage 25 for 10 plus years and trying to get it going again. It’s been sitting for a few years.
Hi, I bought the Savage XL a few weeks ago. It happens, I can not lower the temperature of 138 C (280F). I have enriched the HSN but not that low temperature. I've gotten in forums and apparently is normal is 5.9 cc. You have knowledge? What temperstura works his Savage 4.6
The manual for my HPI savage XL 5.9 says to tune the HS needle until performance no longer increases AND temps don't reach above 250F. then adjust LS for better throttle response. I did that, car runs great and I have no complaints. Temps stay at a safe 235-245F. BUT I feel like it can have alot more power. No wheelies can be achieved like they showed in this video. I KNOW its a different, larger truck.. canI lean it out more safely?
+Mark Meinert yea.. idk how expensive your temp meter was... but it might be inaccurate, and showing you too high temps.. Maybe it is only running 210-220? As long as the engine NEVER stalls... Not even just once during an entire tank!! You will be fine! But as they say many times in the video, do SMALL adjustments =) good luck! btw I own a "Savage 3.5" (an old model from around 2009-2010) and just got myself an XL like you =) I can keep you updated how my break in, and tuning is going if you like? =)
+Mark Meinert And btw. this is really important The thing that makes your car able to wheelie is not high-speed needle.... It's low-speed needle adjustments =) My savage XL had VERY poor acceleration, and even quit sometimes if given full throttle from idle... Simply because it got too much fuel... That again is fixed by leaning low-speed =) Just keep tuning low-speed (little at a time) until your idle begins to raise... Then you should stop or even turn it a bit out again... Now yours might be different... But I had to screw my low-speed in about 2-3 times!! Which is ALOT.. Never seen that before.. ALSO!!! Your slipper clutch might be a tiny bit too loose to allow the car to wheelie.. But DON'T just tighten it in all the way, that will for dore fuck your gears and differentials up very quickly!! But good luck mate! =)
+FreakyFox Thank you! Since the posting of my comment I have replaced the motor since I was having basic 5.9 problems. I will hopefully having this truck running again Thursday. I got an Picco .28 and ERCM big bore end bleed pipe. And robinson racing slipper clutch spur, and clutchbell gear. When I was removing my stock clutch I noticed it was 3 full turns from full tight. I'm thinking it backed off after the 2 gal i put though the 5.9, lock tight will be my friend haha. As for tuning i know what to listen for and get a basic tune going using HS needle. I have yet to mess with low speed.
+FreakyFox Yes I would like that please do! And funny as it is I use a emissivity adjustable IR temp gun that's calibrated with a black body. (My job is actually inspection) I specialize in thermography in power plants and petrochemical haha. SO I hope its accurate!
Dont use temps to tune, Use sound and performance. Temps can be affected by anything and running the engine at 250 wil not harm it. Lack of lubcrication will hurt an engine not temps.
Im desperately truing to help my nephew set up his savage x but i cant find the battery and receiver set up video anywhere I cant set it up help please
my nitro rustler when started the wheels spin when off the ground. when i place it on the ground they stop of course. my car rolls forward when i put on breaks and i haven't even touched throttle. slightly forward not a runaway. how can i stop this?
A I have the savage x 4.6 big block truck can u tell me Were 2 find the one way bearing kit or bearings at? Thanks if u can help me or the part number it will be greatly appreciated
sounds like the idle is to high. Adjust the idle speed turn the idle screw which is located on the right side of the carb and turn in counter clockwise
Hello name's nitro I do a lot of tuning but it seems it gets different every time well I am on my third one now savage 25 complete ready to run but lol I Start it it starts I let it run for a little bit because I don't no the car so basically doing a te break in on the truck I take out the igniter then Rev a bit still running then it cuts off restart same thing happened have not touched the low or high speed needle yet should I ??
Your mixture is too rich, try lean out the high speed needle 1/8th of a turn until you can get it to run in a circle. But! Do not lean it out as if you were tuning it. lean it out just enough to keep the car running, even if it is rough, it is normal for the engine to run rough during the break-in period.
I need help by you doing the setting on the low or high nidle. The would use less nnitro gas or is gona make use better performance for the engine? I have a hpi rs4 n I just did the brake in but I didnt touch the nkne of the lower or high speed
I just got my hands on a nice savage x 4.6 and messed with it a little and got it to fire up. But my roto start doesn't always engage the engine... Any idea what is causing that? I've not taken it apart but if I roll it back a bit it will usually catch to where the roto start will crank the engine again. I wonder if it's worn out or missing some teeth?
It sounds like it could be one of a few things: Take out and clean the One-Way bearing. This can help, but is probably only temporary. It could also be at the point that wear on the bearing rollers and shaft means it will not reliably engage anymore. Replacing both will ensure that you have good engagement.
@@OfficialHPI thanks it turned out to be caked full of greasy mud stuff. It was super caked and slick. I sprayed it out real good with some cleaner fluid and put a thin coat of grease on the shaft before reassembly and it never missed now. So much easier to start it. Got it running like a raped ape but no gear shiftage now 😒
HRP....attention HRP..... We need nitro Savages to start coming out here in the USA Our sons are grown up and are ready to bash and run with us....but WE NEED SAVAGES! Did you hear me? Are you listening to me!?
Hello! I have a k4.6 big block savage Im having Issues with. At idle the wheels keep spining so the clutch is engaging at idle. Does any one know how to fix this issue???
As a Savage XL user, i would say no if you are an average joe and want great performance. Brushless is the way to go for you if you don't care about the noise and feels and whatnot.
in 2020 in Coronavirus times I still believe this savage 4.6 or XL or 21 was one of the best nitro trucks of all times
Just picked up a savage! Put a 21 engine in it. take your front drive axle out and let me know how much fun you have LOL.
I actually just rebuilt my savage 25 , haven’t ran it in over 8 years, had no compression, it’s running great now 👌🏻
@@mikemanzo9673 funnily enough, I was handed my brothers savage that has sat in his garage for approx 10 years. Stripped the whole thing down and rebuilt it. Took it out for the first time today for tuning. It went like stink lol.
The Paradox Yahh I’m on the brake in process now to for some reason it idles fine but as soon as I hit the throttle it shuts off , idk maybe it’s running to rich have to tune it still
@@mikemanzo9673 was having the same problem. It cleared after leaning the mixture.
this was by far the BEST tutorial ever made back in the ol days!
I agree..,.this is a really good tuning video, Not many will show lean conditions like they did. One thing they glossed ovr was idle settings.
1. Do everything noted up to 17:25
2. What should happen is after some HS runs and letting it go to neutral, you'll hear the engine two-stage. By that do a HS run and let it go to neutral, Count how long it takes before the RPMs DROP. Typically in this state they wil drop pretty quickly.
3. Lean the LSN 1/8 and do a HS run. The time it takes for the RPMs to drop should INCREASE.
4, Repeat #2 above until the engine takes 12-15 seconds before dropping. It wil be a high idle,,.but a consistent one.
5. Once you have a consistent, high idle...simply lower the idle.
Give it a try even if you are just re-tuning. I have vids of it for anyone that wants to see it.
Nitro RCNerds vclly
Nitro RCNerds ข
Wow. Brings back memories. Had one of these back in 2008. 2speed. Sick.
I just unearthed one I had in the garage since 2008. It's a wreck but now I'm so excited to get in running again. I think the servo died and I just neglected it.
Dang, I wish youtube was around when I initially went into this hobby. I have since changed over to electric. Good vid! Now I want a nitro kit again, Thanks!
The biggest take away for me displayed in this video is the fact people use gloves to handle all these chemicals. I am screwed, and the air filters are super huge now. I still love the sound and smell of nitro though. So what do you all recommend? I have always ran Traxxas kits, but this thing looks pretty cool. I just got back into RC last year, a lot has changed, the tech especially. Got a MERV last year, just to scratch the itch. I dig it, however, I always want MOAR!
Shane Munoz I have never had a nitro car before, but I have to say it looks like alot of fun just breaking in, tuning and maintaining the machine
Shane Munoz electric is the way to go imo
@@jamesandonian7829 I'd say electric is good for starters tbh cause they aren't as powerful and normally aren't as fast but if you want a challenge go for the nitro cars and tuning and maintaining them is fun but also very annoying at times
Glad I found this, I have an old Savage 21 barely used... Just got it back out gave it a good clean and hoping to get some used out of it... Haven't got the dvd with all this on anymore though
i just found a hpi savage today in peices, i have most parts, such as the remote,... looking forward to having fun... nice stuff yall
Excellent video for us beginners that covers all needles. Thanks.
Purchasing a new 4.6 since I have to retire the 5.9 due to parts being hard to find. These are great rc trucks.
Mine still runs sweet after all these years, upgraded the TX to digital and 25Kg servos, never gonna sell it
Cant wait to get mine this summer. Great video too!
Ive got a Bullet 3.0 the Savage is next on my list and only my second ever Niro. HPI Rule!
Excellent video, very nice section about setting up the carburettor, not shown in many RC videos on RUclips . 2021 and I still the savage is probably the best 1/8th scale monster truck on the market. I have two, 1savage 25 & 1 saavage X 4.6. Just wish part here in the UK where easier to come by.
I keep flooding the engine on first start, not actually got my Savage XL K5.9 going yet. But this tutorial is brilliant, going to try all this again and follow it to the "T" except it is slightly different for the XL... Would be nice to see an XL version of this. Although the principles are the same, the settings are slightly different.... Thanks for this HPI. More please!
Nice video! Best vid for tuning your savage! Thanks
You move the high speed needle in 1/8 turns clockwise,to tune the cars top speed will increase once the top speed does not increase you will about have the hsn adjusted then after that do the low speed needle the same,if it does back the needle off
just what i need to do for my 5.9 big block transplant in my savage x 4.1
2k19 still nice to watch
Yup. I have several HPI cars. My Mini Nitro was stored for at least 15 years and after a quick tear down and cleaning of the engine, it fired right up and runs like new. I store my cars with after run oil and I wrap in Saran wrap. Then place in a plastic sealed bin.
Yeah I built a custom bmw m3 nitro and I do the same tune that was shown here and the car is pretty fast
Haha just got mine last week.. Awesome!! They said its so much better using electric ive got them both i preffered still nitro.. The bomb!!!
This video gave me alot of help even though i have a inferno st
Yes, the same implies for the xl. The break in is the most important step though.
Love This! Thanks Guys!
i did 90 off a cliff and was wondering if my warranty covered it
Did you still have the receipt
be sure to save your old glow plug 'seal washer' and reuse it with the same orientation.
Nice! I'm having issues starting mine after few years right now. Can't get fuel from tank through the line with blocking the exhaust and pull start. When I drop some fuel removing the glow plug it did start for few seconds. Still no fuel running through the line. I was never an expert at this. Lol.
Try some fresh fuel tube. It could be blocked with old fuel. The same applies to the needles. Take the carb needles out and clean them with some fresh fuel. Reset to factory settings and start from there.
Great video! Many thanks for sharing.
yes, i read in a mag that the company started in usa, (so the brand is USA),
they have smaller outlets all over, europe, japan, china. thats what it said in a rc mag i get anyway.
as soon as i can im buying one of these!!!!!!
Thanks for the guide 😊 helpfull
Im here on 4/20 in 2024 all stoned finally put the engine back in my rig after converting it to drill start, and my drill is too weak hahaha. So close now
i didnot follow any of these instructions when i bought it but its as good as this one
i think they did that at the store and also tuned it becuase they said one more hour
when I put in the rotor, then the car itself roll forward a little.. what does it mean? What should I adjust
For the Savage 25 can we set the low speed and high speed flush with the top for default setting as shown in this video? I’ve had my Savage 25 for 10 plus years and trying to get it going again. It’s been sitting for a few years.
This is what I did just in the last couple days. Definitely rich but easily tunable from there! Hope that helps.
Hi, I bought the Savage XL a few weeks ago. It happens, I can not lower the temperature of 138 C (280F). I have enriched the HSN but not that low temperature. I've gotten in forums and apparently is normal is 5.9 cc. You have knowledge? What temperstura works his Savage 4.6
I have a xl 5.9 hard to keep a tune but can take a bashing!
The manual for my HPI savage XL 5.9 says to tune the HS needle until performance no longer increases AND temps don't reach above 250F. then adjust LS for better throttle response. I did that, car runs great and I have no complaints. Temps stay at a safe 235-245F. BUT I feel like it can have alot more power. No wheelies can be achieved like they showed in this video. I KNOW its a different, larger truck.. canI lean it out more safely?
+Mark Meinert yea.. idk how expensive your temp meter was... but it might be inaccurate, and showing you too high temps.. Maybe it is only running 210-220? As long as the engine NEVER stalls... Not even just once during an entire tank!! You will be fine! But as they say many times in the video, do SMALL adjustments =) good luck! btw I own a "Savage 3.5" (an old model from around 2009-2010) and just got myself an XL like you =)
I can keep you updated how my break in, and tuning is going if you like? =)
+Mark Meinert And btw. this is really important
The thing that makes your car able to wheelie is not high-speed needle....
It's low-speed needle adjustments =) My savage XL had VERY poor acceleration, and even quit sometimes if given full throttle from idle... Simply because it got too much fuel... That again is fixed by leaning low-speed =)
Just keep tuning low-speed (little at a time) until your idle begins to raise... Then you should stop or even turn it a bit out again... Now yours might be different... But I had to screw my low-speed in about 2-3 times!! Which is ALOT.. Never seen that before..
ALSO!!! Your slipper clutch might be a tiny bit too loose to allow the car to wheelie.. But DON'T just tighten it in all the way, that will for dore fuck your gears and differentials up very quickly!! But good luck mate! =)
+FreakyFox Thank you! Since the posting of my comment I have replaced the motor since I was having basic 5.9 problems. I will hopefully having this truck running again Thursday. I got an Picco .28 and ERCM big bore end bleed pipe. And robinson racing slipper clutch spur, and clutchbell gear. When I was removing my stock clutch I noticed it was 3 full turns from full tight. I'm thinking it backed off after the 2 gal i put though the 5.9, lock tight will be my friend haha. As for tuning i know what to listen for and get a basic tune going using HS needle. I have yet to mess with low speed.
+FreakyFox Yes I would like that please do! And funny as it is I use a emissivity adjustable IR temp gun that's calibrated with a black body. (My job is actually inspection) I specialize in thermography in power plants and petrochemical haha. SO I hope its accurate!
Dont use temps to tune, Use sound and performance. Temps can be affected by anything and running the engine at 250 wil not harm it. Lack of lubcrication will hurt an engine not temps.
The Idle is too low or your mixture is too rich and make sure to have a fully charged glow plug that it works correctly.
Y’all dnt have a video for the savage xl 5.9 gt6
Suggestions where to get replacements parts online ?
eBay is your best bet. I'm about to rebuild one.
i literally have the exact physical copy of this: hpi rc cars DVD version 3
Still hanging out for extreme gas engine...
Would be great for HPI to do new videos.
Im desperately truing to help my nephew set up his savage x but i cant find the battery and receiver set up video anywhere I cant set it up help please
The savage 21 n the 25 n the original ss
have a look on wikipedia they have info on there about hpi.
how do i set the carb, rev screw and throttle screw?
Good Video Thanx Guys
Still rocking the SAVAGE.21 WITH A K4.6
No way I have a savage 21 with a 5.9 big block in it what a beast it is
my nitro rustler when started the wheels spin when off the ground. when i place it on the ground they stop of course. my car rolls forward when i put on breaks and i haven't even touched throttle. slightly forward not a runaway. how can i stop this?
My savage doesn't sound when it is changing the shift it takes it really fast and it has the stock motor but a different hpi exhaust
great video thank you!!
I have one of the Savage 21
What causes the engine to not even rotate with the rotostart, like a locked flywheel ? How to fix that ? Thanks.
A I have the savage x 4.6 big block truck can u tell me Were 2 find the one way bearing kit or bearings at? Thanks if u can help me or the part number it will be greatly appreciated
sounds like the idle is to high. Adjust the idle speed turn the idle screw which is located on the right side of the carb and turn in counter clockwise
nope it changes between where you are like the altitude and the weather and what season it is
Hello name's nitro I do a lot of tuning but it seems it gets different every time well I am on my third one now savage 25 complete ready to run but lol I Start it it starts I let it run for a little bit because I don't no the car so basically doing a te break in on the truck I take out the igniter then Rev a bit still running then it cuts off restart same thing happened have not touched the low or high speed needle yet should I ??
I see they said nothing about checking the temp during break in. What's the proper temp to run the 4.6?
Okay on a Savage 4.6 how do you plan the wires to the remote control
Or should I Start and let it idle for a tank then refuel while truck is still running lmk
Your mixture is too rich, try lean out the high speed needle 1/8th of a turn until you can get it to run in a circle. But! Do not lean it out as if you were tuning it. lean it out just enough to keep the car running, even if it is rough, it is normal for the engine to run rough during the break-in period.
..nice guide !
I need help by you doing the setting on the low or high nidle. The would use less nnitro gas or is gona make use better performance for the engine? I have a hpi rs4 n I just did the brake in but I didnt touch the nkne of the lower or high speed
I have a savage 21 that hasn’t been used since 2009
about 45 mph
hpi trophy 3.5 is big block or small block?
How fast dose it go
Can i use engine big block to hpi savage 25....
Hi I new with that hobbies and I have one like that my question how come stop and you now please.
I just got my hands on a nice savage x 4.6 and messed with it a little and got it to fire up. But my roto start doesn't always engage the engine... Any idea what is causing that? I've not taken it apart but if I roll it back a bit it will usually catch to where the roto start will crank the engine again. I wonder if it's worn out or missing some teeth?
It sounds like it could be one of a few things:
Take out and clean the One-Way bearing.
This can help, but is probably only temporary.
It could also be at the point that wear on the bearing rollers and shaft means it will not reliably engage anymore. Replacing both will ensure that you have good engagement.
@@OfficialHPI thanks it turned out to be caked full of greasy mud stuff. It was super caked and slick. I sprayed it out real good with some cleaner fluid and put a thin coat of grease on the shaft before reassembly and it never missed now. So much easier to start it. Got it running like a raped ape but no gear shiftage now 😒
@@OfficialHPI kudos for responding after all these years!
you dont have to do anything to break in the savage flux 2350 do you?
Mine has a pull start and it flooded and the pull start just let go now it can’t start how do I fix? My father will be pissed at me
need parts for my old savage .25
is the f4.6 a pull start as well ?
HPI Bullet ST Getting Started Guide is where?
Hpi small block getting started guide
my first rc car
?
My hi speed needle in the savage xl 5.9 nitro is turning the black plastic piece as well should it do that or not
+Aeshan Perera that is what it's ment to do =) It's so you can adjust it with your fingers as well =) Good luck with your car =)
+FreakyFox when I accelerate the truck at around medium throttle it stops Wat should I do?
how old is trhe truck?? Almost new??
And does it stall? or just shut off??
+FreakyFox ya it's brand new
HRP....attention HRP..... We need nitro Savages to start coming out here in the USA
Our sons are grown up and are ready to bash and run with us....but WE NEED SAVAGES!
Did you hear me? Are you listening to me!?
its got hpi europe on the poster behind him at 2:37
From which country is the brand HPI from? England are USA?
but once you got it tuned, shouldn't it be okay?
How many tanks of fuel do you use for the break in?
About three or so...
how long does it take for Savage x 4.6 to finish one tank while idling?
to much :D
help! My savage x is only making one lap the it shuts down ,why does that happen?
It helps thanks
Be ok if hpi ever messaged back to emails. Spend all money but no help after..
tell me how to carburate (tune) the engine of a savage x 4.6 big block. XD
Hello! I have a k4.6 big block savage Im having Issues with. At idle the wheels keep spining so the clutch is engaging at idle. Does any one know how to fix this issue???
Lower the idle speed with the set screw.
mii nitro rc is like a 5.99cc it gos over a 100 mph
how big is the tank
Would this engine fit a 1/8 nitro buggy?
Yep any big block engine will fit any 1/8 car
Thanks
should i buy 1?
Its awesome!
As a Savage XL user, i would say no if you are an average joe and want great performance. Brushless is the way to go for you if you don't care about the noise and feels and whatnot.
Anything nitro and, or gas related all have the same break in step by step procedre. Regardless of the motor that is being ran in the R/C...
❤😂🎉😢😮😅😊. ไฟแอดพ์. ???
Why do people put rubber tubes on the exhaust
cause the exhaust doesn't really get hot enough to melt it and I'm pretty sure it's made of silicone which has a higher melting point
to stop oil getting on the rear tyres
Okay im sure you don't have to do EVERY SINGLE step .. But just running it idle and tunning
watch the video..
The only problem is my car always cuts out when I start it :(
So turn up idle
i like wacing this even tho im a pro
zombieqtr *watching *