I really dig going over what happens if something happens, like filling the holes after putting on the moisture seal. Sometimes YT videos are so perfect, that when stuff happens like that, DIYers start to freak out! Well done, Mitch!!!
Great work. I have seen enough to now tackle my own project. Im planning to do my garage which is 6mt x 5.5mts which is around 360 sq ft. in a decorative pour. Not a big job but I am looking forward to getting into it. Do you have a vid that shows how to finish off at the roller door? I have the bottom of my door that sits in a drop off from the main part of the garage floor. About a half inch drop. The concrete then ends at an expansion joint. Not sure how to get this part finished.Would like to see how you do it. Cheers buddy!
Damn I really love what’s you and your company done for this floor. I want try to turn out my salon floor to be it. But can’t find any company cannot do like it in swfl.
Do you guys have a contractor on Long Island NY? unfortunately the guy that did my floor scammed me and I was his crash, test dummy, and I’m pissed. It needs to be redone.
I did my entire house using the old method. I gotta wonder why you changed it. Is the old method that bad? Are my floors going to peel? The first room did not come out as well, this video has me worried.
You will have to scruff up the tiles first, get that top lay off the tiles. Then put down the paste prime to remove the tile lines. Then you would be ready to go. Mike have a video on it.
Depending on the traffic, it may need to be polished once a year, but other that that similar maintenance and cleaning compared with tile or laminate floors. To keep it pristine, I'd give to a light sanding and new top coat every 5 yrs. But again that all depends on traffic and amount of direct sunlight and extreme weather (temperature) changes
@tylerskelton9339 Could you tell me how to buff an epoxy floor plz. I did not do it a contractor did. It's been a year and it's not glossy like it was. Plz help and thank you
I really dig going over what happens if something happens, like filling the holes after putting on the moisture seal. Sometimes YT videos are so perfect, that when stuff happens like that, DIYers start to freak out! Well done, Mitch!!!
😊😊😊
😊😊
😊
This was the best floor I've seen. None have ever come out like the countertops which had made me apprehensive of doing it
Hey Mitch, and crew! Another great video! 🙌🏼
That’s awesome!! Looks beautiful!!!
Great teaching video!!!
Thank you 🙏
That is beautiful
Great work. I have seen enough to now tackle my own project. Im planning to do my garage which is 6mt x 5.5mts which is around 360 sq ft. in a decorative pour. Not a big job but I am looking forward to getting into it. Do you have a vid that shows how to finish off at the roller door? I have the bottom of my door that sits in a drop off from the main part of the garage floor. About a half inch drop. The concrete then ends at an expansion joint. Not sure how to get this part finished.Would like to see how you do it. Cheers buddy!
Can you use this o press wood or plywood? Trying to find a good looking, durable, low cost flooring option for a rental property.
Can this be done in a garage and take the weight of a truck
Yes . I actually do garages all the time
for a large room like that, can you use the propane cylinder with the torch attachment like they use for weeds?
How bout exterior marble floor can you put clear epoxy ?
So gorgeous!! 😍🤗 Would you do this in a kitchen with windows? How slippery is it? I got a chuckle out of you being interrupted by the outro!! 🤣😂
Perfect for kitchen floor or countertop. Its not slippery once you put on that top coat.
@@shenikofrett8981 Thank you!
How to do it on old very used tiles ?
How do you fix major pitting and spalling everywhere?
Damn I really love what’s you and your company done for this floor. I want try to turn out my salon floor to be it. But can’t find any company cannot do like it in swfl.
How can I learn to do this.
I'm 35 and considering a small business working for myself.
How long until it yellows
Need Help I have a soft spot in the middle of my floor what can I do to fix it.
I'm about to do this for my game room. Its only 186 sq ft
Do you guys have a contractor on Long Island NY? unfortunately the guy that did my floor scammed me and I was his crash, test dummy, and I’m pissed. It needs to be redone.
Can you mop and clean the floor as regularly as a tile flooring once this is done?
Yes you can but be sure not to ever use abrasive cleaners.
Does that last and final coat self level? This is so beautiful….I am envious of the hi e that has it. Thank you.
It last for a very long time.
What were you doing with the roller on the blue painters tape?
I did my entire house using the old method. I gotta wonder why you changed it. Is the old method that bad? Are my floors going to peel? The first room did not come out as well, this video has me worried.
Is there anyway of putting epoxy over slate tiles where they still show but are sealed and shiny..how would it adhere?
You will have to scruff up the tiles first, get that top lay off the tiles. Then put down the paste prime to remove the tile lines. Then you would be ready to go. Mike have a video on it.
Fabulous
Aren't you supposed to wear a respirator when working with epoxy?
What grit sand paper was used?
Where do I get those spike shoes from ?
Price
Doea this cover up odors
What is the required maintenance on this floor?
Depending on the traffic, it may need to be polished once a year, but other that that similar maintenance and cleaning compared with tile or laminate floors. To keep it pristine, I'd give to a light sanding and new top coat every 5 yrs. But again that all depends on traffic and amount of direct sunlight and extreme weather (temperature) changes
@tylerskelton9339
Could you tell me how to buff an epoxy floor plz. I did not do it a contractor did. It's been a year and it's not glossy like it was. Plz help and thank you
How much materials is used per square meter?
How much primer
How much expoxy
How much marble coloring
How much coating
Thank you for your reply
Taking legal action as they refuse to take accountability for over charge.
What are you talking about?