COMPUSTAR PRO T-13:HOW TO ADJUST YOUR SHOCK SENSORS!
HTML-код
- Опубликовано: 3 окт 2024
- Showing how to adjust your shock sensor through the drone mobile app for the COMPUSTAR PRO T-13
I have my glass break sensor adjust very low in the app and on the brain module. Doing that fixed the false glass break sensor alarms. Check out my other videos and if you enjoy them smash the thumbs 👍🏼
Make sure you Subscribe to the channel if you haven’t and give the video a thumbs up!
Support the channel 👇🏼
cash.app/$alexstv
#alarm #cars #carmods #compustar #shocksensors #dodgedurango #rtdurango #durangort #customrides #mopar #diyvideos
Hey I have the Compustar CS7900-AS-Kit Bundled with Blade-AL and Drone X1 LTE Module and I don’t have that feature I just have the option to switch on and off
That sucks, if you have the whole kit with the premium subscription you should have it. I’m thinking your installer didn’t configure it for that
The LTE module does not have the DASII sensor built in. Only the X1-MAX, they are two different Drone modules. The CS7900as only comes with an analog impact sensor with a thumbwheel adjustment. The CS7900as comes with T9 remotes, not T13.
Mine as well. It only have a on and off option. Would be cool to adjust sensor from app tho@AlexsRTLife
@@ECross.i have the pro t13 and i don’t have the option either
@@phoenixfn9189same here T13 Pro and don’t have this feature, only a activate/deactivate switch
I don’t have the sliders either, just on and off for the shock sensor. T13 system. Compustar needs better documentation.
My drone setting doesn't give me these options. T13 pro
I can't adjust any of this. Compustar T13 Pro with Drone CM900AS, Premium Plan. It's so hard to find any information on the Compustar systems for a DIY. I had my system installed by a professional but I wish I had all the abilities to get into the system like they do.
Thanks
My screen of this doesn't allow the sensitivity settings with the slider adjustment for each feature. Only has the on/green or off/white buttons. ***Update*** Figured out I don't have the upgraded kit for the Drone.
So what did you do? I'm having the same issue.
@Jesus Favela Do you have the Drone X1 or X1 Max?
@@MJCCJC22506 just looked up the kit says drone x1
@@jesusfavela3434 the X1 doesn't allow those features, only the X1 Max
@@MJCCJC22506 ordered the x1 max. I'ma wait till the free month is up and have it swapped out. Thanks for the response and info 😊
Where is the best place to mount the shock sensor? Windshield? Under the dash?
Some experts say in dash area towards the middle of vehicle for a more balanced shock detection
Yeah mines don’t have adjustment just on and off
Is this feature available on the t12?
I just got the system and I have android and I can get that option. I'm still on my 30 day trial but I think the trial is for the premium plan
Yeah, I think so too. I’m the meantime enjoy the benefits!
I got the ultimate package and I had it when I was a premium subscriber and then when I went to ultimate it disappeared
Hello, if they appear to me, but I upload it and it doesn't do anything to me, it doesn't report to my application that they hit the vehicle, they say in drone mobile support that we have to configure it but they don't tell me how to do it ¿¿¿¿ Do you know how to configure them? Cheers
Can you please us what features "pay-walled" behind the premium plan? Is it still worth it to have this without the plan? Thank you.
I did a video on it. It’s worth it for sure, and it’s pretty reasonable price. I couldn’t show all the features because of privacy issues though.
I think people are getting confused by this video. This will work if you have the T13 with the Drone X1-MAX, because the max contains the sensors directly in it. However in most cases when you get a T13 pro install the installer uses the Compustar 9913AS kit which has the standard Drone X1 LTE module and uses the DAS-II security module for the shock, glass break, and tilt sensors. As far as I've found, the Drone has no way of configuring the DAS-II sensor sensitivity levels. The only way to configure it is by removing whatever panels to gain access to the little display on the DAS-II and then following instructions (they can be found online) for programming the sensor sensitivity levels. It's unfortunate that it isn't possible to configure the sensitivity levels on the DAS-II from the Drone considering what a premium product this is. It is possible to turn the shock sensor on and off from it apparently. If someone knows of some way to get the Drone to configure the sensitivity levels on the DAS-II that I'm not aware of, let us know.
so if i have my X1 LTE replaced with the max, i can change the sensitivity
@@phoenixfn9189 you should figure out which security module you currently have. If it's the das-ii there's no point in replacing your drone module with the max because you already have the sensors in the das-ii. Just look up how to change the sensitivity levels on the DAS-II.
@@phoenixfn9189I saw a comment by compustar on one of their official videos that it's apparently possible to configure the DAS-II via the two way remote or drone mobile, but I've yet to find any way to do that. If I figure something out I'll post here again.
@@rawdmonidoes the x1 max makes the alarm go off and sound a siren or horn? does the x1 max replaces the dasII? or they are different one for notificstion and the other for notification? i am confused because I purchased x1 max but did not purchase das II sensor thinking that x1 ax will make the sound (alarm off) and notification as well
I just got it installed and the sensor sliders are gone for android and the guy who installed looked on his iphone and noticed they weren't there either, maybe they just got rid of it for the time being to improve it or is it still there for you?
Yeah I have them. But which Plan do you have. I believe you need the premium plan to get all the features
I have iOS, I’m not sure if that makes a difference either
do you have the DAS-II 4 in 1 security sensor? also do you have the drone X1Max module?
I don’t know the exact model numbers
or could it be that I just have the pure x1-max lte equipment installed and I use the alarm with its digital shock sensor,,, it should be emphasized that the support people tell me that I have to configure the advanced options and I don't know how,, can you help, greetings
It’s for the”COMPUSTAR pro T-13”. And if you have the dual shock sensors along with the drone unit installed and you have the premium drone mobile plan you should be getting all features and defiantly notifications. Did you have a COMPUSTAR certified technician install it?? (That’s important because they’re specifically trained to specialize with the COMPUSTAR units)
Hello, I'll tell you, I installed it myself, it's the pure x1-max lte device with the obd2 harness, and I want to know if you can help me know how to access the advanced functions to be able to program the x1-max lte device, the PIC cables,, POC 1, POC 2,, and the impact sensors... If it is through the idatalink ADS usb,, or by another means, greetings
how much u paid