Что ж мы не показали, как нитка из шпульки лежит на поверхности перед началом работы? Машинка при такой разнице в толщине нити будет тормозить. Что то тут не так.
Can I do this with any sewing machine? I love watching you. I'm a very very big beginner. I have only sewn purse covers. Straight stitches. Please make more video with this type of content. I'm having my first grandchild in August. My dream is to make a quilt out of linen with a embroidery stitch and a possible picture of a 🐘. If you could have any ideas and have time. Please see if you can show me some tricks. ❤
Такая толщина нити не пройдёт. Угробите машинку. Если уж делать нитью, то нитками в тон пряжи строчкой зиг-зиг пришить пряжу. В этом случае выкладываете толстую нить под лапку как тесьму. Только следите, чтобы нитка шла ровно по ценру. Тогда при зиг-заге игла делает проколы то с одной стороны пряжи, то с другой. Так пришивается толстая нить к ткани. Надеюсь, что понятно. Если шьёте, то поймёте.😊
A safer method would be just to zigzag topstitch over the yarn. That bobbin won't hold much. You'll have to re-wind every 18". Plus it's not good for your machine.
Ce qu’il ne disent pas c’est qu’il ajuster la tension de la cannette avec la vis et qu’il a un fil de nylon comme fil de dessus. Il faut beaucoup de pratique et d ‘ ajustement pour bien réussir mais c’est faisable
I don't know. I don't think I would put my sewing machine through this. I never ever comment negatively on a craft video but this one is concerning. No spoken directions and not responding to questions is a big red flag. Reminds me of those disastrous Five Minute Craft videos. Do yourselves a favor and learn actual embroidery and save your sewing machine from expensive repairs.
Totally agree. Sewing machines aren't meant to work like this. At minimum the bobbin casing would likely never be the same after all that friction and the shredded yarn fibers that would definitely get into the workings of the machine.
I think it is not possible to put that bobin which is having that colour thread which is bigger in normal bobin case. If we stitch like this definitely machine will get to repaired
Итоговая вышивка не машинная. Не показали как такая нитка пойдёт со шпульки. Она не пойдёт. Челночное устройство не рассчитано на такую толщину. Да и как-то интересно у вас получается после очистки от бумаги пропала зелень, а после переворота опять появилась. Вот на фига держать всех за лохов? Вы действуете по принципу " дура не дура, а сто рублей наполоскала." Был такой анекдот.
Что ж мы не показали, как нитка из шпульки лежит на поверхности перед началом работы? Машинка при такой разнице в толщине нити будет тормозить. Что то тут не так.
Thank you for sharing this with me today
Wowwwwww. That turned out very beautiful. I love the technique that you used.
Olá, aqui Brasil ! Simplesmente amei, amei amei ! 😍🥰😍😍👏👏👏
Amei ❤
Can I do this with any sewing machine? I love watching you. I'm a very very big beginner. I have only sewn purse covers. Straight stitches. Please make more video with this type of content.
I'm having my first grandchild in August. My dream is to make a quilt out of linen with a embroidery stitch and a possible picture of a 🐘. If you could have any ideas and have time. Please see if you can show me some tricks. ❤
На курсах кройки и шитья в 1985 году нас учили так делать 🫶
👌 super
Very beautiful ❤❤
Круто!
А на состояние механизмов машинки это как влияет!?
Ворсинками не забиваются подвижные части!?
Челнок придется заменить
Такая толщина нити не пройдёт. Угробите машинку. Если уж делать нитью, то нитками в тон пряжи строчкой зиг-зиг пришить пряжу. В этом случае выкладываете толстую нить под лапку как тесьму. Только следите, чтобы нитка шла ровно по ценру. Тогда при зиг-заге игла делает проколы то с одной стороны пряжи, то с другой. Так пришивается толстая нить к ткани.
Надеюсь, что понятно. Если шьёте, то поймёте.😊
Nice one can I use the thin yarn
Прекрасная работа.Большое спасибо.
So cool, nice.
Идея замечательная. Умница ❤
A safer method would be just to zigzag topstitch over the yarn. That bobbin won't hold much. You'll have to re-wind every 18". Plus it's not good for your machine.
Ce qu’il ne disent pas c’est qu’il ajuster la tension de la cannette avec la vis et qu’il a un fil de nylon comme fil de dessus. Il faut beaucoup de pratique et d ‘ ajustement pour bien réussir mais c’est faisable
Ap apni voice Lago zeada bhtar rahy ga❤❤❤❤
أحببت ذلك شكرا جزيلا أتمنى ان تنشرو طرق أخرى للطرز 🇩🇿♥️🌹
Very nice work thanks for you
Thank you it is good and nice job. ❤❤
Wonderful
Nice 👍👍👍
Best👍💯
What stitch speed w yarn? Faster or slower than regular thread?
Super super❤ très original je vais essayer
No muestra como pone el porta hilo en la maquina...
Thank you,. may I know what kind of machine you use and also the feet. Thank you
You're such creative Friend. Thank you for your video. God bless 🙏✅. Done Subscribe 🙂
Tank you you give me very nice idaels
Hii normal small pedal machine la podalama
❤❤❤❤❤Super🌹🥀🌷🌺🏵️
❤❤❤❤❤❤❤
👏👏👏👏👏👏👏👏
Genial
Спасибо за идею
روعة عجبتني الطريقة
Think you so much indeed
واوووو جميل جداً جدأ
Nice
💖💖💖💖Nice💖💖💖💖
I don't know. I don't think I would put my sewing machine through this. I never ever comment negatively on a craft video but this one is concerning. No spoken directions and not responding to questions is a big red flag. Reminds me of those disastrous Five Minute Craft videos. Do yourselves a favor and learn actual embroidery and save your sewing machine from expensive repairs.
Totally agree. Sewing machines aren't meant to work like this. At minimum the bobbin casing would likely never be the same after all that friction and the shredded yarn fibers that would definitely get into the workings of the machine.
I think it is not possible to put that bobin which is having that colour thread which is bigger in normal bobin case. If we stitch like this definitely machine will get to repaired
❤❤
Top top 👍🏽 waw 👏🏽
❤❤❤👏👏👏💋❤️🇹🇷
👍👍👍👍
I like
❤❤❤
Super
I love it thank you so much🙏❤
😊😊😊
Having hard time with bobbin
👍👍😱😱😱😱👏👏
Mom cut you don amazing
Враньё
Итоговая вышивка не машинная. Не показали как такая нитка пойдёт со шпульки. Она не пойдёт. Челночное устройство не рассчитано на такую толщину. Да и как-то интересно у вас получается после очистки от бумаги пропала зелень, а после переворота опять появилась. Вот на фига держать всех за лохов? Вы действуете по принципу " дура не дура, а сто рублей наполоскала." Был такой анекдот.
👏👏👏👏💚💛🤍💙
++++!!!!!
😊
Bakwas.
Super