@@roddelfernando waiting for your z2101ax videos I'm planning on getting one but I'm scared that my 5g modem will not work it is fm-350gl as it is so troublesome
@@seanrodgbelmonte9882yes would be great. However MT7621 processors are known to limit speed to 250mbps, bottleneck 5G modems in wg3526 wg1608 z2101ax. Have been experiencing same problem. I would test soon using powerful routers.
Do you still use your em12g often? Mine is starting to randomly restart itself inside my wg1608. Sometimes can be fine for multiple hours at a time. Power supply replaced, temperatures good and nothing sticking out in the sys/kernel log.
I'm using dell wyse 5070 with RM520N. I had disconnect issues before. I switched to ECM mode which is much stable i guess. ECM let's the module work like router. Here's how to use ECM. openwrt.org/docs/guide-user/network/wan/wwan/ethernetoverusb_cdc Also install usb drivers like usb3. Try update em12g firmware
Hey i need some help, i finally got it to where in the putty i can run opkg update but when i install modem manager or anything else, it tells me to check network but i think i have everything set on, no idea what to do even gives error code 1 or 225
@@roddelfernando i have a ethernet from main modem for wifi into my pc ethernet from mains lan, and then from lan of wg1608 to wan on main modem, its the only way i can keep my pc connected to be able to install anything and only lan had an IP address nothing else did i think
i ended up resetting it and did the ip change to the 2.1 and then ran opkg update and it tells me operation not permitted or check network connectivity @@roddelfernando
no i have it from a gl inet i have from a provider but it's as if the wg1608 is connected but it tells me wget 4 or cant intall opkg update because of connection not permitted, i've even reset it it and followed the steps to the t it just doesnt want to connect@@roddelfernando
WG3526 s.click.aliexpress.com/e/_Dm406CP
EP06-E s.click.aliexpress.com/e/_DBCJ0GJ
WG1608 s.click.aliexpress.com/e/_Dm3agw7
EM160R-GL s.click.aliexpress.com/e/_DdweXH5
RM520N-GL s.click.aliexpress.com/e/_DCeGZuT
EM12-G s.click.aliexpress.com/e/_DdweXH5
Is the ethernet (internet) connection a must to accomplish this task? (I only have a sim as means of internet access.)
@@HucklberyTaz it depends on your preference on firmware
@@roddelfernando can not connect to internet to dl packages ... ?
@@HucklberyTaz ruclips.net/video/aBcUDsVD4KA/видео.htmlsi=cf3Y6C9O1m6hcJR8 faster method
ZBT router
Yes i love zbt routers, you can check my videos. Wg3526 my favorite. I would love to try wifi 6 routers like z2101ax but i have limited resources.
@@roddelfernando waiting for your z2101ax videos I'm planning on getting one but I'm scared that my 5g modem will not work it is fm-350gl as it is so troublesome
@@seanrodgbelmonte9882yes would be great. However MT7621 processors are known to limit speed to 250mbps, bottleneck 5G modems in wg3526 wg1608 z2101ax. Have been experiencing same problem. I would test soon using powerful routers.
@@roddelfernando oh that's a nice info thank god i haven't bought one yet
is it possible to have load balancing or failover? like primary internet is wwan and have another port configured as wan port?
Yes. Install mwan3 from software. It will load balance or failover.
Do you still use your em12g often? Mine is starting to randomly restart itself inside my wg1608. Sometimes can be fine for multiple hours at a time. Power supply replaced, temperatures good and nothing sticking out in the sys/kernel log.
I'm using dell wyse 5070 with RM520N. I had disconnect issues before. I switched to ECM mode which is much stable i guess. ECM let's the module work like router. Here's how to use ECM. openwrt.org/docs/guide-user/network/wan/wwan/ethernetoverusb_cdc
Also install usb drivers like usb3.
Try update em12g firmware
Hey i need some help, i finally got it to where in the putty i can run opkg update but when i install modem manager or anything else, it tells me to check network but i think i have everything set on, no idea what to do even gives error code 1 or 225
did u plug internet at wan port? ip address from wan and lan must be different or else no internet will show up (conflict if the same).
@@roddelfernando i have a ethernet from main modem for wifi into my pc ethernet from mains lan, and then from lan of wg1608 to wan on main modem, its the only way i can keep my pc connected to be able to install anything and only lan had an IP address nothing else did i think
i ended up resetting it and did the ip change to the 2.1 and then ran opkg update and it tells me operation not permitted or check network connectivity @@roddelfernando
@@goshdang2924 so your only internet is from wg1608?
no i have it from a gl inet i have from a provider but it's as if the wg1608 is connected but it tells me wget 4 or cant intall opkg update because of connection not permitted, i've even reset it it and followed the steps to the t it just doesnt want to connect@@roddelfernando
What is the price of doing a new installation on my WG3526 CAN YOU SEND YOUR DATA I WILL SEND YOU MY ROUTER
This is short method ruclips.net/video/aBcUDsVD4KA/видео.htmlsi=ucTCGVl8kv8cMP5K