Franks Little Workshop Tour 2019.
HTML-код
- Опубликовано: 8 сен 2024
- A quick workshop tour of my little workshop.
Shows my basic layout and some of the equipment i use on a daily basis.
If you would like a review of any of the tools shown in the video please let me know and i will do a review if i can.
Did the tour now as i have just had a bit of a makeover and it was still tidy...... that wont last long 🤣🤣🤣
If you have any questions or comments i would love to hear them.
I hope you enjoy the tour.
Thanks for watching.
😃
Dont forget to like and subscribe and hit the notification bell 👍.
Man cave😂😂✌️😎 I love it
Thanks mate 😁. I love it.... but it's freezing cold out there today 😂🤣. Thanks very much for watching. Stay safe 😁👍
NOOICE! Super Organised
😁 Thanks Garviel. I think it needs a bit of a tidy up at the moment... but I can still see the floor.. so life is good 😂🤣. Thanks for watching 😁👍
Nice shop, great use of space!
😁 Thanks Eddie, its a bit more of a mess now (you can see in my more recent videos). But I'm hoping to make some changes this year to give me a bit more usable space 😁. Thanks for watching 😁 👍
The bookcase door is excellent 👌 I want one.....
Nice shop! Subscribed.
Excellent video Frank. Cant believe how much you have fitted in such a small space.
Thanks Stephen 😁. I'm sure if I had a bigger workshop i would just fill it up with more stuff 😂. Thanks for watching 😁👍
Very nice shop. thanks for sharing.
Thanks very much 😁. It hasn't changed much in the last year so I haven't done a 2021 tour... yet. But I have plans for a much larger table saw.. so will need to find some more space ..... if that is even possible 🤔. Thanks for watching 😁👍
@@frankslittleworkshop Fun fun. Mine has not changed much but I did a tour of my Dads who passed away and my brother and I reconfigured it to fit our needs.
@@shanesmaineshop just watching it now 😁... I'm up to your hardware corner.... that shop is massive 😮. Quite a few dusty spider webs though 😂🤣. Thanks again for watching 😁👍
@@frankslittleworkshop Yes it had not been used for two years after my Dad died so we definitely have lots of dusting to do. LOL
@@shanesmaineshop 😁👍
Frank, well thought out workspace. I have built a workshop almost identical in size (long and narrow) due to space constraints. I have similar challenge with sliding mitre saw rear clearance and have mounted it on a 3/4 inch ply sheet (the depth of my workbench) which I slide out when in use and secure with a couple of star knobs into the workbench so the cantilever doesn’t topple it over.
Hi Steve 😃. Sorry for the delay with my reply (it didn't notify me on my phone ☹). That sounds like a good solution to my miter saw problem. I am still balancing it on the edge of my workbench at the moment.... a health and safety disaster waiting to happen I'm sure). I'm hoping to get a new table saw soon, so I imagine the whole bench will need a redesign so I may include your idea in to my build👍. thanks again for watching Steve. stay safe mate 😁👍
Jumped over and found your tour video since you commented on mine. 😎 You have an extremely efficient setup with so many smart ideas and solutions in your relatively small shop! Hands-down the hidden bookshelf door was amazing! I literally said "no way!!" when you pushed and walked through it. LOVE IT!!! I look forward to seeing your other videos on your channel! Thanks for commenting and allowing me to find you Frank!
Thanks Sam 😁👍. Can't wait to get back to some meaningfull projects, but life keeps getting in the way (im sure you know how that feels). And now I have your back catalogue of videos to catch up with as well 🤣😂🤣. Thanks Sam, much appreceated. keep safe 😁👍.
Great use of space! I enjoyed the tour.
Thanks woodworkingdaddy 😁. I still manage to get it in a mess whenever I do any work, but it's nice when it's clear. Thanks for watching 😁👍.
I love how organized your shop is, Great video. Have a great day xoxo Sandy
Thanks Sandy 😁. I have to keep it organized, it's so small that if I don't put things away I end up falling over them... which is never a good idea when there are power tools involved 🤣😂. Thanks for watching Sandy 😁👍🇬🇧
I’m with you with the wheels. Having a small shop you have to move stuff. Great👍
Thanks Mark 😁. Yep, if it isn't on wheels then it's guaranteed that it will be in the way 😂. Thanks for watching Mark 😁👍
@@frankslittleworkshop absolutely correct frank. I’m much the same trying to fit it all in and more. Keep them coming mate👍
Loved the tour, I love my workshop and like you I had to really think of space and the best way for machine placement but I have picked up some good ideas from your shop pal. Thankyou regards Louie.
Thanks Louie 😁. Glad you liked the tour. I really need a bigger tablesaw now but really can't find any more space. I will need to get super creative 🤔. Thanks again for watching 😁👍
There's some pretty clever stuff in there Frank, very well thought out. I'm forever chopping and changing, trying things and was looking for some inspiration. I like the idea of just using a cheap router table and sinking it into the saw bench. When I built my table saw I'd always planned on adding a router part to it, but hasn't eventuated. I'm still clamping it to a vice with a table on top.
I'm not too sure about the sliding doors, I think that would annoy me. I'd put two smaller opening doors instead. But, whatever works for you!
Thanks for sharing.
Thanks Peter 😁. The cheap router table as an insert has worked well so far 👍. But I now have a new router (a Triton), when that is mounted in a table it has an adjuster that you can access from above. This means I will need to start drilling holes.... or I may just get a posh insert 😁. Thanks for watching Peter 😁👍
G’day Frank, you’ve set your workshop up really well mate & it reminds me of a Dutch fella I used to watch Rob Appelman channel but he unfortunately doesn’t have a channel anymore, the table saw has a cast iron top, wow not that common on one that size.
Great tour 🍻🍻👍👍👍
Thanks Dirk 😁. It's such a shame when chanells disappear 🙁. But we all know how committed you need to be to maintain a youtube channel. The tablesaw is an Axminster (yes with a cast top) 😁. But it's getting a bit under powered for some of my projects... so I want to get a 254mm Trade version.... but it's so expensive 🙁. I'll have to wait. Thanks for watching mate 😁👍🇬🇧
CNC demonstration please Frank ⚙️
Fantastic tour... I'm just starting my cnc journey..
Hi Jigsey😁. It's a fun trip and so much you can do. I've just successfully carved in to some slate to make a house number... but it did result in a blown fuse in my cheap China power supply 🙁. But I soon fixed that 😁. Sláinte mhaith mate and thanks for watching 😁👍
Just subscribed Frank, nice shop and really well thought. 👏🏻👍🏻🇬🇧
Thanks Wayne 😁. It's currently about 3" deep in sawdust because of my latest project... I better get the shop vac out 😂. Thanks for watching 😁👍
Everyone needs a secret passage way to a man cave.... you should make one 😁. Will be using the CNC on my next project.... stay tuned...lol
Great video Frank, wow your workshop is super organized. Great idea with the sliding doors, now I've subscribed I'll be able to work my way through your video's. Keep up the great work 👍👍👍
David
Thanks David, it's not always that organized. It's normally trashed after each project but it's almost a pleasure to tidy up 😁. Some of my videos are a bit "random" i hope you like them. Thanks very much for the sub. 😁👍
You can never have enough stools 😂😂😂😂😂
😂🤣 And I've just made another one as my latest video 😂🤣. Thanks very much for watching Steve 😁👍
i have those LED lights, they are great
Thanks Kevin 😁. They have been up for over a year now and are still going strong. I did have to replace one of them, but just ordered a new one (£20) and swapped it over. I am super happy with them. Thanks for watching Kevin 😁👍
Hi Frank
Where did you get the 4 inch flexible hose from?
Cheers Andy
Hi Andy 😁. I got it from Amazon, it's the anti static hose and is still great. This is the link. www.amazon.co.uk/gp/aw/d/B00EV14BMM?psc=1&ref=ppx_pop_mob_b_asin_title.
Hope it works. Thanks for watching Andy 😁👍
@@frankslittleworkshop cheers Frank
Keep up with the good videos