Dustin Evans Well Equipped Garage Shop Tour
HTML-код
- Опубликовано: 30 июн 2024
- While in Dallas I was welcomed into Dustin's shop to record a shop tour video. Dustin has a well equipped shop in a standard 2 car garage. To see more of Dustin's work follow him on Instagram: / evans_woodcrafts
Rockler shop stand: shrsl.com/1mxb1
Rockler dust right: shrsl.com/1mxbd
SawStop table saw: amzn.to/2Wpcck9
Dewalt planer: amzn.to/2EQBexs
Powermatic 8" jointer: shrsl.com/1mxbh
Jet drum sander: shrsl.com/1mxbj
Jet bandsaw: shrsl.com/1mxbn
Rockler router table: shrsl.com/1mxbq
"Well equipped" is putting it mildly! That's a lot of money in that shop! Good on him for building it up to this point!
Have always admired Dustin’s shop. Glad to finally get a tour. Great job boys!
Congrats on a great shop Dustin. Thank you for sharing Jay. Dustin, you do beautiful work.
Puts a smile on my face seeing my babies out there :). Great setup
Dema, good to hear from you...haven't seen you on RUclips for awhile
Thanks for the tour guys. Looks like Dustin does some nice work!
Great shop tour. It is always nice to see how other people build their shop and learn from them. Thank you so much!
Thanks Dustin for the tour and Jay for taking the time to introduce us to Dustin !
Shop videos are the best! Great way to use this second channel.
Really like these shop tours to look how others have layout of their shops for ideas and information. And hat’s off Dustin incredible craftsmanship.
Great tour and lots of good idea. Thanks to you both!.
Great looking shop, so many fun ideas! Thanks!
Man, this the kind of shop layout for a 2 car garage I've been looking for. I think this works very well and I might be able to pull off some re-laying out my tools for a better flow based on this. Thanks for this great tour!
Very inspiring, I picked up some great ideas and you convinced me on skipping the floor sweep ;) Nice shop Dustin !
I've been playing around with the idea of reorganizing my shop lately so this is perfect timing. I have a 2-car garage as my shop as well so this really was helpful. I got extremely frustrated this weekend when I was tripping over crap and it started to put doubt in my head about what I was doing with all the equipment. I had to take a break and realize that's not the problem, organization was. I'm a fairly organized person but having a few projects going on at the same time caused a mess in the shop and thus caused the frustration.
Great shop tour and some great ideas on what I can do with my shop.
Thanks for sharing! Lots of great ideas.
Exceptional video, Jay. I love how you take the time to video other woodworker's shop.
Great looking and functional shop.
Beautiful shop with a nice selection of tools. I am very impressed by the projects that he has made!
Seeing this video give me hope that one day my little garage can support my hobby. My garage is about the same size. Thank you for doing this!
Glad you have been sharing all these awesome folks shops with us! There’s always an idea or two from each craftsman.
Great shop, lots of ideas if I can ever get my wife to agree to park outside!
One note on those air compressors: the aluminum tube that goes to the tank from the motor has rubber orings that don’t like the heat very well. We have one at one of our gas stations that we have replaced about 4 times now due to that failure. Luckily, Home Depot is great about just swapping it out with another one.
Love the rockler carts, definitely going to look into those!
Thanks for sharing your shop with us!
@Jay Bates, very nice video ..... @Dustin Evans, great shop, your work looks great too.
Wow, as the SmallWorkshopGuy, I can tell you that is my dream workshop. Now if I can just figure out how to double my garage - not going to happen, so this will continue to have to be my “dream” workshop!
Thank you !!!!!!! After struggling for months on a way to set up my garage shop, this video put it all together for me. I have a 2 car garage and I have been trying to find a way to set up half of it for my woodworking because the other half is boat storage. I set up just like this layout on the table saw half the day after watching this video. I've been working in it for a month and it is awesome. Thank you !!!!!!!!!!!!!!!!!!!!!
Great shop layout exactly the same size as mine and this is what I am modeling my current shop build from well that and yours jay keep the great content coming sir
I went to school with this guy. Pretty cool to see him so big into this. Hopefully one day I can do this as well.
Justin Blanchard hey Justin! Small world man. Anytime you’re up this way give me a shout.
Awesome space utilization, I have a 24x30 2 1/2 bay garage detached, and I think this is how I will set mine up
very nice shop be proud very proud
Word of advice on the bandsaw carbide blade. I have the exact same bandsaw and the first carbide blade I bought was a 1” x 133” I assume that one is 133”. Anyway I found that the one inch blade didn’t give me enough adjustment. I dropped down to a 3/4” carbide blade and got way better results. Being able to rock the blade back on the tire makes a difference. Have a good one
Hey thanks for the video guys. learnt a lot from this tour
Limited "Right On" s from Jay... I'm proud of you buddy. In all seriousness these are some of my favorite videos. Love seeing other shop layouts and grabbing ideas. Keep em coming brother.
Well equipped it certainly is. I liked the matching front of cabinets etc. If I had anything like this setup, would probably spend time just admiring and not making anything else. Thanks for the tour guys.
Love finding more guys from Texas 👍🏼
Brads Workbench I’m in Mission Texas
I am Dustin’s sun I am so proud to see him out there I love him so much!
you are so sweet Tyler Dean. He is lucky to have you. I love you. GG
Love you too buddy
Laura Evans I love you so much GG
Dustin Evans love you more than you can imagine
Great video! Love seeing these shop tours, lots of good ideas and inspirations for my own shop. I really appreciate the advice about what is really liked, and what you'd suggest doing differently--this is really valuable wisdom. But how in the world is that shop so clean! :)
Awesome video! Cheers
Love the shop ....thanks for the tour :)
He may want to look into TMAX ROLL UPS for the garage door, they’re out of Houston. Basically removes all the upper tracks and gives you more wall and ceiling room. I had mine installed today and wow what a difference. Great doors!!!
Awesome shop tour! What I can’t figure out is where everybody keeps their finishing supplies!
Very cool shop. I got some great ideas for my next shop. Thanks you.
Nice workshop and equipment 👌
Awesome shop!
Love these shop tour videos. Nice to see how different people's setups work.
Great video, good looking shop.
Nice shop and good tools.
Nice shop must be nice to work in there. Grats.
NICE SET UP REALY LIKE IT ,DOUG
Love the Arts and Craft... My fave is Green and Green...
At first I was like Dustin Evans, how does Jay know him. Different Dustin Evans. The one I know is here in Denver and is a factory driver for Team Associated RC cars. Nice shop.
Great tour! 😃👍🏻👊🏻 #teamspindlesander
Great use of space, well organized! A little too clean for a lot of work to be going on...lol
Joking, nice shop!!
It would be nice to see an overhead plan of his great shop in SketchUp!
Great shop brother as some beautiful work as well.
I noticed a couple of thumbs down and I am going to believe that they are the electrical police lol
Really appreciate the shop tours. Great to see how others arrange things. Dustin I am really anal and try to stay very organized but you may be my match. Beautiful shop. How do you keep the cast tops looking so brand new?
Nice shop.
Great shop tour Jay. I picked up a few ideas.
Lovely setup. 👌🏻
He's like a guy that was in the military or police force.
Nice tour. Man hit me up next time you are in Dallas. You are welcome at our shop anytime.
Getting ideas!
Great walk-through. Oh, the envy :-) Obviously a lot og JET there. Thinking about going JET myself - should I ?
Hey, Jay great shop tour. Just wanted to let you know that I am noticing some banding on the video really notice it on the white walls, might want to bump up/down your shutter speed to correct that.
Great presentation, Jay...and thank you, Dustin, for sharing your shop with us.
I couldn't figure out what the Festool under the woodworker's bench is. Can anyone tell me? Thanks....
dust extractor....fancy shop vac
John Manning the systainers under the workbench are for sandpaper
Great shop! Do you have links to the outfeed/assembly table and miter saw station?
Dustin, I really like the box that was shown at the end of the video. You wouldn't happen to have plans for that would you? I am very new to woodworking so I need plans in order to make anything. Thanks. Nice shop by the way.
befmx31 I did use plans for that. I’m fairly certain I got them from woodsmithplans but I’m not seeing it in their catalogue?
Jay, Does Dustin have plans for his outfield table? Thanks.
Super clean. cut the bottom of the rack off and use the space for plywood.
Great shop tour! Question - on the outfield slash work table, how is the hardboard attached and what is underneath? How do people typically attach? I made one with hardboard on top plywood and the hardboard isn't flat but wavy
WorksInTheory the hardboard is just screwed into the MDF torsion box, allowing it to be replaced. It was a little wavy in the beginning but has flattened out well.
@@DustinE610 thanks. I found screwing in mushroomed the hardboard and no longer making it smooth and flat rougher.
just realize you live not too far from me! Haven't seen much on the instagram lately
Nice
Dustin should ask garage door guys if they can raise the track, i have 9foot ceiling, 8foot door and the track is at the drywall by the end
Great shop, Dustin. I noticed you had a carbine clip around your bandsaw's blade; is there a reason for that?
That guy has great eyebrows!!
52" guides would be great if you used one side as a router table.
With your router table on wheels, do you find it to move? I have locking casters too but I am considering going back to static feet.
Eric Dommer I’ve never noticed it move. The casters lock both swivel and wheel.
hey who did that bronze mallet? i couldnt understand when you mentioned it!
I was gifted a very similar morticing machine, but mine was missing all of the bit attachments and I have no clue where to get them.
- Tim
Okay I’m moving in
Summers Woodworking we’re selling the house so come on with it! Lol
where do I buy the quick connect for the planer you have ?
At first glance, I thought this was Jay's garage shop. It must have been the miter saw and working table placement.
Nice shop setup. Same size as mine but good lord I've got too much tools. Lol
No such thing boss. Go buy more!
@@joeymerrell8585 I would love to but no more room. My enclosed car hauler houses some of it. I call it my overflow.
Wow. A lot of money has been spent on that shop! Very impressive though. I have a 1 car garage but trying to fit the same kid of tools in it (But smaller and cheaper ones). Lol
What size is your Table ,one with the wood vise
What type of mobile base is on that jointer?
You need to part ways with the old stuff if you’re not using them. I’ll gladly take any of them off your hands :)
What size is your garage?
I subbed for the Mickey picture, not the frame.
Size garage in m2?
Miter saw lazer was on......
I regognize the ply board on the mitre saw station , is it the one where it don’t need sanding
Where may I find that Mickey Mouse canvas in 0:05?
Does Dustin have a RUclips channel?
Papa Steve I do not! There’s just not enough time!
Dustin Evans Yes sir, I certainly understand not having enough time
You’re making some nice things and I really like your set up in your shop.
I uh..... um..... uhhhh ....ummmm.....like it.
Six figure shop?
I meant son
toys, toys, toys. lots of wasted money here.
(i mean it as a compliment)
how do you spell M O N E Y, better yet B I G A$$ ΜΟ ΝΕ Y?
wd sir, very nice machinery and great layout :)
Where may I find that Mickey Mouse canvas in 0:05?