Think you’ll find your main beam control won’t work. The small white plastic bit that popped out needs to ride over the little white stud sticking up it then flicks the plastic sled back and forth to operate the main beam contacts. Don’t ask me how I know 😃😃
Surprisingly serviceable nothing like the one on my ford fiesta which was impossible. I noticed you didn't put any grease back in,. I think it's just the years of moisture that build up and cause it to go green
I didn’t re-grease it because I intend to get myself one of those liquid copper pens for PCB track repairs to see if it helps out any. More of an experiment than anything really.
That’ll be one of the surface mounted diodes on the dash that’ll have failed. You need to strip the clocks down, de-solder the failed SMD, solder in a new one and re-assemble the clocks, they’re a common failure point. I have a video on the channel where I do exactly that, but to change the back lighting colour. It’s the exact same principle.
No, I’m not a commercial business and I’m not insured. You’d be better off replacing it with an after market part of you’re struggling to clean yours up.
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Thanks so much for the video, it worked wonders to repair my misses motor
Excellent news! Glad you could save yourself some cash 👍🏻
Great vid.
Thank you. Perfect fix
Think you’ll find your main beam control won’t work. The small white plastic bit that popped out needs to ride over the little white stud sticking up it then flicks the plastic sled back and forth to operate the main beam contacts. Don’t ask me how I know 😃😃
Thanks for the heads up, I’ll take a look before I reinstall it. Thank you 👍🏻
Absolutely correct as I put it back wrong and the main beam was permanently on. Lol! All ok now.. Thanks
Thank you this video proved very successful my hubby fixed the stalk after obviously I found your video
Thanks once again
I’m glad the video helped!
Good work thank you.
not completely free though, but definitely worth a shot instead of throwing in twenty for a used 1.
Great stuff 👏 👍
Surprisingly serviceable nothing like the one on my ford fiesta which was impossible. I noticed you didn't put any grease back in,. I think it's just the years of moisture that build up and cause it to go green
I didn’t re-grease it because I intend to get myself one of those liquid copper pens for PCB track repairs to see if it helps out any. More of an experiment than anything really.
Thank you so much
did this to mine and its working. but mine had a problem with the Left indicater in the dashboard not working. and it is still not. any fix for that?
That’ll be one of the surface mounted diodes on the dash that’ll have failed. You need to strip the clocks down, de-solder the failed SMD, solder in a new one and re-assemble the clocks, they’re a common failure point. I have a video on the channel where I do exactly that, but to change the back lighting colour. It’s the exact same principle.
thanks! I will do that. Luckely I have the gear and mekanik skills. Thanks for the info@@DABDIY
will disconecting the air bag cause a warning light to come up on the dash?
No, the battery was disconnected. Everything gets reassembled and plugged back in as normal before the battery gets reconnected.
Only if you turn the ignition on - so best to disconnect battery.
What sort of grease is suitable to apply on to contacts after cleaning them? Is silicon grease suitable?
Electrical contact grease
@@DABDIY Thanks for the quick reply. It was well worth subscribing to your channel. Cheers mate
You’re welcome, I do try to reply as soon as I can! Thanks for subscribing 😁
Excellent. Would you please give me a hand for my Citroen C1 car indicator? Thanks a lot
How do you mean?
@@DABDIY would you repair my indicator stalk please? I will pay you
No, I’m not a commercial business and I’m not insured. You’d be better off replacing it with an after market part of you’re struggling to clean yours up.
@@DABDIY don't worry brother please help me.
I’m sorry, I can’t. I’m not insured to undertake work for others.