C1/107/Aygo 1.0 Petrol Throttle body, MAP sensor and PCV cleaning
HTML-код
- Опубликовано: 15 окт 2024
- In this video, I remove, clean and replace the throttle body, Manifold Absolute Pressure (MAP) sensor and Positive Crank case Ventilation (PCV) valve in an attempt to improve throttle responsiveness and to cure a rough running issue. The car is currently suffering from increased fuel consumption, slow throttle response and rough running. I serviced it in the last video, but that didn’t resolve the issue. Link to Chris' channel:
/ bazz07733
Just followed the instructions and my daughters car is running so much better. The acceleration is smooth and linear instead of lumpy. I have a work C1 to do next! Thanks Dave
I’m glad it’s helped you out! I was astounded at what a difference it made to my car.
@@DABDIY Please advise I clean MAP sensor he wasn’t dirty was a little oil on surface on it I clean PCV, replace first up O2 sens. Bosh afternaket so car run nice as before I do all of it. But constatly pop up Check engine?? Have you idea? I preciate answer.
You’d have to scan for codes to see what the cause of the EML is.
@@fest102 could be the other oxygen sensor. It's best to replace both.
@@JC-hu1wd no error code for second O2 sens. OBD Texa show high oscillations up n down from 0.45V whitch is the normal operating value… so yes I’ll replace it
Although my C1 is still running fine I will do this service to her pretty soon. Thanks for explaining and greetings from Germany…
It’s really good preventative maintenance
Mission accomplished! Starting is smoother, idle is better. Although the components weren't that dirty. Thanks again and have a nice trip.
Many thanks. We have an Peugeot 107, 09. This will help us too.
A lot of thanks, man.
I love you.
Daihatsu Sirion 1.0
Hi there and a big thanks done all the above on my daughter's car today, and being a waste of time around cars this is a bit of a big thing for me, i understand that there are people that can do this with there eyes closed but not me, so done step by step in the vid and got it all done, your Throttle body was really clean when i took a look at my daughter's it was black everywhere, and from the first turn of the key the car does not sound half as ticky or as loud got to wait for my daughter to take the car out but a big thanks for your help in keeping the car running tidy also for keeping some money in my pocket instead of the garage.
I really do love it when I get feedback like this. Thank you Daz, I am really glad that it helped you save a bit of money and have fun with the tools in the process.
I was surprised at how clean my throttle body was, especially after doing the same thing to my friend’s 107. They do run a little happier once everything has had a good clean.
Sir @@DABDIY changing coil packs to aftermarket one what are the advantages? I am using vvti
@ELECTROMARINEMANIA if you’re looking for performance, a bigger spark is always advantageous. Visit TSA Performance on Instagram, they provide performance coil packs at a very reasonable price.
I'll definitely be doing this. Plus I'm changing the coil packs, sparks and oil and oil filter. Can't wait to see if there's a difference in performance. Fully expecting tesla-like acceleration.
It’ll certainly make a difference! If you’re changing coil packs, consider visiting TSA Performance and get some of their upgraded coil packs.
@@DABDIY will do. Whilst I have your attention, are there any other fluid changes I can do? I have an automatic aygo 2008. Ta
I’m not fully conversant with the automatic gearbox, so I wouldn’t know if you can do gearbox fluid or not, but I would definitely recommend doing a coolant flush while you’re in the engine bay.
@@DABDIYI gave a 2008 Toyota aygo full tank use to give me 340 and now I only get around 290. I do service every 6 months. The mileage in the car is 123,000. Shall I try cleaning all the parts which you did in this video
@jalaniashraf9064 it won’t do any harm to clean everything. Also consider checking your tyre pressures and take a look at your driving style too.
Did this all cheers mate , great vids for my c1 , was bought as a runaround until i bought another family car now cant sell it, just trying hard to not buy a set of alloys for it !
You’d be surprised how cheaply you can pick a set of alloys up for these things. I found some on eBay local to me for £60. The auction was at £40, I offered £100 to pick them up the same day, the seller said he wants to let the auction run and I won them for £60 😅
Great stuff, big help for my justy.
Thank you so much for this helpful instructions!!!
Thanks got my clean too, daihatsu cuore 2009
This video is actually extriemly helpfull and therapeutic to watch..guess I'm not not free tomorrow after all as I now want to do this..at 00.41am..😂..thanks a bunch dude👍
Question..what is the pcv used for? What's its job?
I’m glad you like the video!
The PCV valve, positive crankcase ventilation valve, is responsible for venting the positive pressure generated within the engine when combustion takes place. It contains oil vapour and other such things like that in the expelled gasses, which are then fed back into the air intake for emissions purposes. I did a video on cleaning the Throttle Body Control Valve too. It’s in the Project C1 playlist.
Thank you so much!! Great and useful video! Greetings from Italy!
I’m glad you liked it!
Good video.I will have to do this.Maybe do it today if rain holds off.
Don’t forget to check out the video where I clean the idle control valve too, while you’re in that area.
@@DABDIY I will do.Thankyou.I wonder if theres a upgrade throttle body to give the 107 a bit more oomph.
Some people have upgraded, but I haven’t because I’m going to turbo instead. Whatever it is you go for, please remember that this is based on a Toyota platform, so Peugeot and Citroen parts may not fit.
You are Help me a lot with all those videos, thank you
You’re welcome, I’m glad these videos are helping 👍🏻
Thank you most kindly
Thank you very much for the video, excellent. The part was incredibly dirty, it seems that that car is used for off-road because of the dirt that the entire engine has hahahahahah
It’s not hat it’s been off road, it’s just that it has never been cleaned lol. I’m going to clean it, but it’s certainly not a job for the winter time 🤣
Hey, excellent content and easy to follow instructions.
Just a quick question, is there any way to view the MPG on the vehicle. I have a 2008 automatic Aygo and i cant figure out how to get the little display next to the speedometer to view live MPG figures.
There is no way from the factory to view MPG figures. Personally, I use full yak and mileage figures and do the maths myself, but I heard you can get an OBDII device to show things like MPG, temperatures etc.
@@DABDIY aah i see. So i didnt miss out anything.. thanks for the reply..
Fuelly is great for tracking mpg if you enter details every time you fill up
Thank you
Awesome video , thank you . Doing all those things next week on my Toyota Aygo , have ordered the parts
Don’t forget to take a look at my video regarding cleaning the idle control valve while you’re in and around that area of the engine.
@@DABDIY , will do , thx
Good video, also what is the purpose of the small air hole? (The one pointed with the screwdriver at 10:53)
That’s the vent case breather. It recirculates air from the crank case back through the air intake system to be re-combusted.
Another great video, Thanks David
I’m glad you liked it Colin. Was this the kind of video you were talking about on Facebook?
@@DABDIY Yes mate, I whole heartedly recommend the PCV valve as it has completely corrected my poor oil consumption, I get asked so often to explain where it is and how...your video is perfect mate :-)
Excellent, I’m glad you like it! To be honest, I didn’t even consider it until you mentioned it. By that time, I was half way though filming this video, which is why it watches like the PCV was an afterthought.
I need to do this to mine also my spark plugs are white which I think is air fuel mixture
Top David 🛠️👍 Thanks.
You’re welcome, I’m glad you could make use of it 😁
Like for a cat, great delping video, tnx!
Hi. Do I have to disconnect the battery before? Thank. Good video 👍
It certainly can’t hurt. Best practice to disconnect the supply before unplugging sensors etc.
Carburetor cleaner works better because chemistry. Does all the good stuff contact cleaner does, but better when it comes to oilyness. Try some & thank me later.
Good info!!
Hi dave done the pcv but finding it a bit hard to get to the map sensor with the throttle body on there, would you clean the map sensor and is it as straight forward to take the Throttle body of as you show in the vid because i might give that a go to get to the map sensor thanks for your help ps not the best around cars that is why i am asking the above thanks.
It really is as simple as the video shows it. Three bolts holding the throttle body onto the engine, you dot necessarily even have to remove the throttle cable - it can be pushed to one side and given a quick clean in situ. Then it’s just two screws holding the MAP sensor in and an electrical cable.
@@DABDIY Thank you so much for your help means a lot when somebody is showing you how to do it the right way.
My pleasure, that’s why I started this channel. I hope it helps you out 🤙🏻
You seem to have a lot more
room than me, I can't get to the bolts at the back of the throttle body at all 😅
It’s definitely a fiddly job, I’ll admit that
Good vid. It's a Manifold Absolute Pressure [MAP] sensor... you might want to amend your description above.
Have a read of the description, it’s all in there 👍🏻
@@DABDIY Ya it's the description I was talking about. The device is a MANIFOLD Absolute Pressure sensor [MAP] not a MAXIMUM Absolute Pressure sensor as you have.
@David Neilson Ah, I misread what you were describing, I understand now. I have edited the description, but unfortunately, there’s nothing I can do about the video now.
@@DABDIY No problem :)
Thanks for sharing. Very useful.
I’m glad you found it useful 😊
Hi there, when trying to remove the front bolt that holds the throttle body I think it snapped. It just keeps spinning but won’t come out. Do you think there’s anything I can do?
The threaded insert has most likely come loose from inside the intake. Worst case scenario, you’ll need a new intake. Best case, see if you can hold it with a pair of pliers as you undo the bolt
Great video! Would you know where to find a replacement for the pcv valve? I had no luck in finding the part number
I don’t have a part number, but I should imagine that any Citroen/Peugeot/Toyota dealer should be able to help out with that. I can’t imagine they’re too expensive either.
Looks like it's Toyota 12204-40030
Toyota part catalogues are fairly easy to find online, e.g. toyota-europe.epc-data.com/aygo/kgb10r/4/engine/1201/12204/
@@74HC04 That's awesome, thank you for that!
@@DABDIY You're welcome. I use Toyota catalogues to get part numbers for parts for my C1. I then either ring up the Toyota dealership and quote the part number (have a numberplate from the same year of Aygo to hand in case they ask), or find them on Amazon / eBay.
It's a lot easier than getting either a Citroen or Peugeot dealer to go though their parts catalogue. That said, when I lived in the UK, I used to get prices from all 3 dealerships - Toyota were often the cheapest.
That’s a damn fine idea! Do you happen to have a link to an online parts catalogue or a PDF or something like that? That would come in handy for some work I’ve got planned.
Do you know what else to check, i've done what you showed in video om my ab40 1.0 toyota aygo but not much changed.
It might be worth taking a look at things like spark plugs too
@@DABDIY Brand new genuine ones.
It’s not misfiring, is it?
@@DABDIY no, but it sounds rough till 1200rpm.
Assuming it smoothes out after 1200 rpm, I can only assume that maybe it’s air flow or fuel injection related. Not sure after that, I’m sorry.
Great content. You got a new subscriber.
I’m so glad you like the channel! Thank you so much for subscribing 🤙🏻
What did you use to clean the throttle body and maf sensor with sir.
You could use anything really. Brake cleaner, carb cleaner etc. carb cleaner would work best imo.
My Aygo 2007 throttle body doesn't have a throttle! I can only see the body.
Why?
Am I looking in the wrong place?
Please advise.
Thanks
It definitely has a throttle. The throttle body houses the throttle, which is essentially a brass butterfly valve. When you put your foot down, the cable rotates the housing crank, which turns the butterfly valve, changing the fuel:air mixture.
@@DABDIY Thank you so much for your prompt reply, but I have to tell ya, I just couldn't see any throttle, throttle line or butterfly.
I will try to make a little video of it, and upload it to my channel.
It could be because it has a VSC system???
I don't know.
I will notify you when the video is uploaded.
Thanks again for your concern.
Nice job. This is great. I just shared on WhatsApp
Thank you 😁
Thank you 😁
what to do for better pedal response ? i feel the best response is in 50km but 20-50 is lazy
The only thing I could suggest is to take up the slack in the throttle cable.
@DABDIY Please advise 4 my C1 I clean MAP sensor he wasn’t dirty was a little oil on surface on it also I clean PCV, replace first up O2 sens. Bosh afternaket so car run nice as before I do all of it. But constatly pop up Check engine?? Have you idea? I preciate answer.
You’d have to scan the car and check for codes first before throwing parts at the problem. Go around and make sure all of the electrical connectors are secure too.
@@DABDIY I do most of that but not check ec. connector. I do scan via OBD (Launch) error code repeat P0171 poor mixture but engine idlle is calm as acceleration is good without cut or twitching. That confuse me a lot! I’ll change spark plug maybe is poor spark fire?
@fest102 changing spark plugs is definitely worth trying
@@DABDIY Thx. on ansewer I’ll do it tomorow. What you think about aftermarket Bosh sensor O2 first up is it good replacement?
@fest102 I’ve not replaced any O2 sensors, but in my experience, Bosch in general is a trustworthy brand.
Hi, could you please give me a part code for the PCV valve?
I haven’t got a part number for it, sorry. Best bet is to visit your local dealer’s parts department for a part number.
Did you do a decat after 9:40? We’re there any noticeable performance increases?
Good clear video, I was gonna show the PCV, map and throttle body with my next oil change, but might not bother now cos you’ve covered it better than I would have lol.
The decat only lasted until the end of the video, the cat showed up again lol. Cover it anyway dude! you'll cover it funnier than I ever could lol
@@DABDIY I might just throw it in with another video, cos I’m gonna do it anyway so why not I suppose lol.
@@StupidBlokeStupidVideos Exactly, why not?! I'm sure someone will get some use out of it.
KGB vvti model is this is same bro?
This is a VVTI engine, the solenoid is on the upper left corner as you look at the engine from the front.
@@DABDIY thank you sir for the reply
When should change the throttle body and due to what fault?
The throttle body doesn’t really go wrong, I’d only change it on defect.
great video good work 👍
Did we find out why the MAP was covered in Oil ?
I didn’t. To be honest Garry, I didn’t check.
Hello,why didn't clean the idle valve?
Because I made that as a separate video. It’s due to be released in the next few weeks.
In germany Toyota aygo very high market
I can see why
@@DABDIY 3 months before , for my friend, we went to look some seven seater , I saw an Aygo 2008 model. price asking 75000euro, I also planning to sale my 2021 model vvti kgb 40 .even my km not run up to 25000 km.
I was about to sale my car , but at the end I make a disition,that I will or I cannot buy a city car like this . I went to Switzerland and Austria and chezh in this car. Budget friendly.
Now mileage dropped take over time mileage was 26kmpl. I was changing oil 0w16 . But this dealer changing 0w20 every time. from next I planning to buy out side and hand over to them . 8500-9000 km I change engine oil
Next summer I want to follow this procedure. Last time cleaned spark plug, just I avoid tip due to irridium coating. But the map and pvc I not touched bro. But VVTI solenoid I clean some time
Can you use brake and clutch cleaning on the the throttle body and map sensor.
I suppose you could. There must be a reason why brake cleaner has been formulated differently though, perhaps it’s more volatile?
@@DABDIY wasn't sure if it would be too strong
@JJ-bo4ir I’d have thought it might be too strong, yes
Ah okay, what did you use?
Carb and intake cleaner
Any useful alternatives to clean with as i dont have electrical cleaner?
Anything solvent based really. Maybe a little brake cleaner or something like that.
@@DABDIY vodka? I used vodka to clean my car after sanding and before painting as it removes oil and evaporated quick lol
If that works for you, carry on with it... though I’d rather drink the vodka than use it as a cleaning agent lol
@@DABDIY that's what all my friends said lol but honestly mate it's knock off Smirnoff and it's rank. Don't know how I acquired it.
That’s fair enough then! Smirnoff is only really any good for cocktails 🍹 and engine degreasing 🤣
Sorry to ask how often would you do this thanks.
I’d say given how easy it is, it might as well be done at every service.
@@DABDIY Thanks for that
Hello there, I also have a Toyota Yaris with the same engine, it only cranks but sometimes starts and immediately stops. What do you think might be the cause/problem?
Thanks
I’m not entirely sure to be honest with you. If it didn’t start at all, I’d say immobiliser. Maybe fuel supply?
Would carb cleaner be OK?
I would imagine so, yes.
My Toyota aygo has done 133k and for 1000 miles it's consuming 3.1 litres before it was 1700 miles for 3.1 litres any idea
Have you done what’s in the video?
@@DABDIY replaced all new parts
Might be worth changing to a thicker oil and see if that helps the problem.
On the subject of the PCV system, it's worth watching out for this split airbox problem: ruclips.net/video/elMzFOjbKdA/видео.html
The author of the above has a few videos on the subject. I'm keeping an eye out - the issue seems to be quite endemic.
I used carb cleaner for pcv valve
I tried that at first. It needed something a little more aggressive than carb & electrical cleaner, so I decided that brake cleaner was the way forward. It doesn’t look like it’s ever been cleaned, but now that it has, I’m confident that arb cleaner will do the job when I come to service the car next year 👍🏻
To be totally honest the video is good but throttle body didn't need cleaning in my opinion
Thanks for your opinion 👍🏻
good job
Thank you 😊
i follow your instrucitons, and i must say that the engine work much better. Thank you again and BRAVO FOR ALL VIDEOS
Be sure to check out a more recent video where I clean the idle control valve too. It’s also worth cleaning the VVT solenoid, but I haven’t done a video on that.