HONDA- How to replace Key Fob Shell Fit for Honda (No Locksmith needed)
HTML-код
- Опубликовано: 11 сен 2024
- This show how to replace a Honda Key fob (remote) broken plastic shell (case) with aftermarket good quality key shell kit. To purchase the key shell the link is below, make sure you choose the right one it comes 3 or 4 buttons. this video is for a 2011 Honda Civic, be aware that older Honda models like 03-07 Accord comes with a transponder chip separated on the side which you have to remove it and glue it in the new shell. .
www.amazon.com...
For anyone that might be struggling to clip the key fob together try standing on its head (opposite end of the key) apply some force downwards and get the top together first then work your way up clipping it together.
Thank you, I been struggling trying to put mine together for like an hour. Definitely helped.
The screw on the key itself has answers! Thank you
Gracias, compré el she’ll y nadie me ha ayudado, tengo que hacerlo yo, gracias por el video, te lo agradezco. Tengo que valerme por si misma, muy bien explicado.👍🙏
Lo mismo aca! ....creo q si uno intenta hacerlo uno mismo, pues hay mucha probabilidad q si se pueda, y asi evitar molestar a nadie, y por hay, pues uno se siente orgullosa de poder valerse por una misma. Ordenè la caratula plastica, y ahora mirando este video, creo q se me harà menos dificil, o quisaz serà algo aun mas facil de lo pensado...hay veremos...pero lo importante es intentarlo. Fue un alivio saver q solo tenia q renplasar la parte plastica, pues en mi ignorancia pense q tendria q comprar toda la llave y programarla la cual supe q esto me costaria mas de $150, pero bendito Dios 🙏 q un señor en el shop donde llevè mi carro a reparar, me dijo q solo tenia q comprar la caratula/parte plastica👍👌. Agradesco mucho este video tambien. Bendiciones donde sea q te encuentres.
Love the music in the background. Unwritten by Natasha Bedingfield!
THANK YOU SO MUCH ...I refuse to give Honda another dollar, I rather take the $100.00 and get an oil change.
Lol, you got it! If you ever need help regarding keys and remotes let me know, i'll help you.
@@mr.torrestv 😉
It's ridiculous just for a small little key
@@mr.torrestv NEED YOUR HELP SIR PLEASE
@@kaypeaceful7885 email me at keyssmartkeysremotes@gmail.com
That's me with the tape right now.😂😂
🤣
😂
My joint just broke, can't even be taped
Same
Great video!
Mine came without the Honda sticker for the back. All you got to do is stick a blade under the old one and it will come right off. It’s attached with some adhesive. On another note it don’t always clicks together that easy. you mite have to fight it a little and slide it into place.
I had to cut some material off mine but very little.
You still need the chip the most important part otherwise it won’t start
OMG!!! 😱 Thank you sooo much for this! A lifesaver! ❤
I ended up breaking in chucks till the key got free takes a while but it works
Funny the case cracks right away but key takes on elephant to remove
Father figure by George Michael is one of my favorite songs
Thanks so much for this! I was struggling and found this video. Very helpful!
So no chip transplant from old FOB to new FOB?
I think the transponder is under the red casing as the fob is different to my one where the transponder sits to the side of it
This is literally what happened to my key this week. Also ready to shell out $200+ until an Amazon link for this kit came up in a Google search. $8. I can only hope I don’t drop that screw!
Could you please update the link this one isn’t available😕 sad to say but I’ve watched way too many videos but this is by far the most direct. I just assume bc I have a 04 I need to play immobilizer inside as well
Is there a transmitter ?
Thank you so much for this. I honestly didn't know where to even begin fixing this. I just hope it's as easy as you made it seem when i get the extra one i ordered.
This helped greatly thank you so much 10/10
Need some help. I have a 2012 Honda Civic.
The plastic housing broke and I ordered a new one, but I don't know if I had a chip that sits on the inside of the plastic housing? It doesn't look like there's even space for one, but the housing broke in the car so I'm worried I dropped the chip if I had one.
The FOB is in perfect condition.
Is the chip in the circuit board for 2012 Honda Civics?
Thanks for this I was struggling 🤣🤣👍
You never added the old keys chip car isn’t gonna turn on
There is differents key model, some has the chip on the circuit board and some has it apart on the side. If you remove the old chip from the old case and glue it to the new case you should be good to go and start the car.
The key is from 2007 up. Not 2003-2006.
@@Damonhitchens it depend on the car. Honda Civic 2006 and up has the chip on the circuit board not separated by the side.
I wish that the "hilt" of the blade fit as neatly into the black plaster holder, my shell snapped together as neatly as that. I've spent a lot of time trying the hilt at different angles, scraped off some plastic, and it doesnt fit well. Nor does the shell snap together like that. The Mf actually recommend hitting it with a hammer which helped a bit. The blade doesnt fit firmly. And that was with a replacement 4 button case sent me when I complained. Maybe a three button shell , which I have, would fit more firmly. Screw holes of the plastic and key don't line up well either. I'm using string and scotch tape..
There is a chip in the casing that wasn't put in the new one? Correct?
What about the transponder how did you reprogram the new phone??
There is no need to reprogram the transponder chip if you are using the old one. Unless you had a situation that you can explain me and i can help you.
I thought the chip was in the shell that’s what I was worrying about. Because the car won’t start without the being in the shell, and I took off the remote and I put the key back in shell without the remote being in the shell and it started that’s why I thought the chip was in the shell not the remote
Year it won’t work for my 2006 Honda Accord cause the chip is in the shell not on the transponder
Mine is a separate chip which has to be removed and put in the new case probably will break it
Thank you!!
You are welcome
Very helpful thanks you 🔥🔥🔥
Hey the Mr Torres, i see you are seeing cases, do you sell flip key also? For honda city 2011 two button? Or do u have a shopee acc? and does all honda city uses the same metal design?
Done !! Thanks a lot for the video
I'm happy you got it done!
The background music is 🤌
This will not work unless you put the chip from the old key in the new FOB
My replacement case doesn't click together. Been struggling with it for ages and it won't clip together
I bought a honda civic keyshell off ebay for $7 and having same problem. Its just does not work. It wont even snap together without the key stuff inside. Poorly made and a scam.
Would this work for a 2009 honda civic? I've seen videos where the sensor needed to start the car is within the key case... is that the case for a 2009 honda civic or would this do the trick..? I don't want to completely rip mine apart right now and be sh** outta luck!
Hi Kiersten, yes it works for a 2009 Honda Civic. I can also help you. I can mail you a new shell with the key already cutted, when you receive the key all you have to do is to transfer the inside electronic, i can guide you, is very simple. Email me of you want me to help you. keyssmartkeysremotes@gmail.com
Hi, one of my buttons in the key doesn't work (the one that opens the car), is this fixable or do I have to replace the key?
Probably just have to change the buttons part and program to your vehicle
I have 2009 civic , jacked up key fob, key embedded . Dealer wants 130 for valet key and 230 for key with buttons . It's bs.
thank you much!
Doing this tomorrow. Thank you for the video.
You got it! Make sure you move the chip to the new case as well if it come separated from the circuit board, it's a little square by the corner. Some of them has the chip on the circuit board so you don't need to move it. If you need help or have a question just shoot me a message.
@@mr.torrestv Just wanted to come back with good news and some words of encouragement for your viewers. My key was exactly like the one in the video, so no separate chip to worry about (chip on this style is embedded in the button box). Hardest part was separating the key portion from the plastic at the fob side. Ended up CAREFULLY using a dremel/rotary tool to liberate the key from its plastic and glue prison. Got nervous when the new plastic anchor didn't seem to fit in the fob before I realized that the anchor has slots on each side to slide into a rail on the Honda logo side of the fob. Snapped into place, screwed in reasonably easily and works like a charm! My dude, you just saved me somewhere between $110 and $320. Keep up the quality work.
@@Eclectified I'm glad you got it done! You're smart. And thank you for your comment!.
I tried doing this I could not get the chip to stay in place.
@@papimami3 glue it!
lol I have the same black tape on mine! 😂
hello, can you help me? the shell i bought includes a blank key blade, that is already installed onto the front face of the shell and won't move even if there's no screw. Any advice how i can disengage the small plastic bit holding the key from the the shell?
That is not the shell in the video. The shell you got they are permanently attached to the case. You would have to have a locksmith to cut the blade and then transfer the electronics. If you need help contact me keyssmartkeysremotes@gmail.com
My icons on buttons are faded any way to fix them ?
yeah I did this but the key won't start the car
I have a 2012 civic
My key has a plastic housing how do I remove that piece to just get the key itself into the new sleeve ??
I have the same question. My key did not break out of the little black piece that holds it. How do you get it out???
thanks bro
Can i conversion a 03 honda crv key into a key like this model in the video?
How do you take the metal key out mine doenst open
I don’t get it this seems simple enough, 8min job but people charge $40-100 to get it done. Why so expensive to get done through a 3rd party
Lol tell me why the second the video started and I seen the key I was like how the hell does he key look exactly like mine I just happened to use electrical tape as well to hold mine together it’s been that way for about a year and half now. I just got the lean paid off at the dealership so I got the spare key but it doesn’t have a fob and my key hole for my door is jammed so they key is useless unless I can figure out how to remove it from the holder so I can put it in a case like In the video I am just not sure if since the chip is at the end of the key toward the tip if I would have to still have the remote programmed to my car before being able to use it
What year is your car? Probably your lock is not jammed and its just the key wornout, but email me at keyssmartkeysremotes@gmail.com, i'll help you out, and send you a new case with a new blade already cutted.
Which tools do I need for this ?
helpful, thanks!
Can u do a video this for a 2008 ford edge please.
Wish radio was turned off and parts flying out of old and new covers were described.
where is the chip transfer?
What model and year is your car?
@@mr.torrestv 2004 Honda Accord.
He never transferred the chip that was glued inside the other shell which means the vehicle want start. I'm guessing he figured it out after the video.
Where can I purchase this new case?
Here is 2 links, see which one fit your key:
www.amazon.com/dp/B07HMPHS2S/ref=cm_sw_r_cp_apa_i_GLojEbVKK978N
www.amazon.com/dp/B07HMT1TN7/ref=cm_sw_r_cp_apa_i_HNojEbTFMEQ8H
excellent narration :/
Is there any separate immobilizer chip?
Depend which model & and year. Let me know which one.
@@mr.torrestv i think no had a look this morning but maybe you can confirm. Its a crv 2007
Is it worth buying those flip keys from Amazon
Can i do this with a 04 honda accord ??
Yea
Why you’re wearing gloves? Are you afraid of electrical shock or something?
The key body slides together you don't push down on it like you see here
Turn the TV off in the background dammit man
I'll consider it for the next one.
why using gloves?
Hey My honda key doesnt have the wide at the end to hold. so which one of your product should i buy ? Here is the image of my key. .. www.dropbox.com/s/xtjlzi2xz83nfpi/From%20Skitch.jpg?dl=0
For that blade, you would have to buy the new shell with a Blank key blade on it and have it cutted by a Dealer or locksmith. I have those shells, i can help you if you want, you can send me your key code and i'll send you the key shell already Cutted, or you can ship the broken key blade to me and i'll duplicate it and send you the new key shell with the blade already cutted.
Man you are dangerous for yourself, the way you used knife blade. When you stick this 3M sticker for honda sign was the faniest bit 😂.
Thanks GOD you are not a surgeon.
Lol
You're lying in this video.... Show that there is a RF chip on the side of the Key Fob that is needed to be transferred as well in order for the key to fully turn on.
WHY HALF ASS, DO IT RIGHT 1000% THE 1ST TIME.
Noone is lying Sr. I can recommend you to look at the description of the video. It says 2011 Honda Civic Not all the models come with the chip on the side. Only older model like 03-07 accord, 03-08 Pilot come with the chip on the side. 06-13 Civic, 08-12 accord, 09-15 pilot comes with the chip integrated on the circuit board of the remote. Do some research.
@@mr.torrestv Daaaaaaaaaamn
@@mr.torrestv hi mr. Torres im sorry if my question sounds dumb. I have 06 honda civic. And was wondering if the rf chip is in the circuit board cause i couldn't find one.. my key just broke off the key fob. Now my car only cranks but doesn't wanna start. It cranka but that's it. Could you help me with some advice before i have to pay for a tow