JBA long tube header install with y pipe 2015 RAM 1500
HTML-код
- Опубликовано: 28 окт 2024
- Turbo RAM - click link to see more • Lifted turbo Hemi truc...
JBA 1 3/4 long tube header with off road y pipe install and sound clips, fits 4th gen ram trucks 2wd and 4wd. This is a 2015 RAM 1500 4wd crew cab lifted 6 inches, 6 speed.
www.hotdamnrac...
Moe's Performance: www.moes-perfor...
Demon motorsports tuning: / 472961639812743
Hemifever tuning: www.hemifevert...
CORE 4x4 use promo code “Hot Damn” for 5% off! : www.core4x4.com
Facebook group: / 130176127592586
4th Gen RAM electronics use promo code “Hot Damn” for aux panel only and get 5% off: / 4th-gen-ram-electronic...
sounds like one of them peapole you see on tv in a dark room talking with a voice over so they can tell who they are
Monalisa Stuckman ol witness protection sounding ass lol
Abels Caliber 😂😂 I’m fucking dead
Or young guns. We're in the spirit world. 😂😂😂
The reason I haven’t done it yet? Well, you explained it. I am patiently waiting for your long term report... then I think it’s time I pull the trigger. Thanks for this one!!!
I put long tube hooker headers,high performance exhaust manifold,flowmaster 40 mufflers with y pipes,on my torch red 1977 corvette.It added 22 horsepower,and the sound is SICK,for sure.russ.
Badass!
Take a drink every time he says Hot dam. Haha good show.
Haha hot damn!
Thanks for all videos it help me out lot I did true duals with long tube headers
Thank you 🙏 I appreciate you! I hope for the best!
I see my self forced to buy this set up. I really am trying to find a whole headers and exhaust kit with kat though
I'm amazed that the ypipe cleared the kicker bars. That was tight! Nice install.
@@stumplimit they are bolted in place to the lower control arm crossmember and the transmission crossmember, really no adjustment. They don't move at all with the suspension if that's what you were asking. They are stationary. If there was contact, you could probably fab a spacer to go between the upper bracket and the trans crossmember to lower the bar down and get a little extra clearance from the ypipe.
I jB weld a radiator before. I had a hole come through on the top and after I patched it lasted 8 years🤘🏼
Strongest bond! I could never get the coin out at the parts store. I miss that display, should have been able to win a prize.
@@HOTDAMN lol
I jb welded mine during COVID . No auto parts stores had a new one so I jb welded it. To this day it's still holding.
Yo… is that your real voice?! Dude you can narrate scary stories.😂
Lmfao 🤣
The hell with that two pipes into one 3" You got long tubes make that shit a true dual exhaust.
Definitely a good idea, money is my only wall 🤣
Awesome !! Exactly what I wanted to do to my truck. Just got a 2006 2500 4x4 Ram. I am guessing that those headers would fit my Ram ?? I love what you did to your Ram, it looks absolutely amazing, and no rust anywhere. I am up in NY, rust country to be exact. I also like that Demon Program Thing you got on your dash. I did not see any Cats in there. Can you run without cats and just put the O2 sensors in ?? Any engine lights go on ?? Anyways all I can say is you have the Mother of All Rams.
💪 the truck is fully built and turbocharged these days, thank you 🙏
Nice...Hot...Damn Jobby Job!
Hell Yes! Glad to see you didnt have to dent any of the header tubes, or have any major problems.
Your truck Sounds nasty man, nice
Thank you 🙏
I need to do this while I still can, getting hard to get up and down from the floor
Same here, bad back.
your face when you started using the hack saw... LMAO bro i was dying
🤣
Yep. Nuttin better than a uncaged Hemi.
Thanks for the video I am about to install some long tube headers myself and this video was very helpful thank you
Hot damn hell yeah!
The Big Show drives a Ram 👍
Hot damn hell yeah! 😎
36:38
That makes two of us bro!
And it ain't even my Ram.
Sounds bad fuckin ass!
Did this guy use to do commercials I can’t place where I’ve heard his voice
Truck was featured on custom offsets
Did the truck being lifted make it easier ? And how did you do your rear O2 sensors ? Did you use antifoulers ? Just wondering cuz i have an all black 2014 Ram 1500 Express with a 4 inch lift ... And ive been looking at headers for a long time and i was worried about the cats but now im thinking about deleting them cuz it would be cheaper and easier and figure it may even give a little more horses .
Being lifted made it way easier 😁
32:05 Absolutely correct! You can't have anything "dingle-dangling" I know of a guy that got arrested for exactly that!
😂
No this truck sweet. All nice shit. Ya his voice is ok. When he stops that over layin.
You the man!
SOAB i was excited that no cutting would be involved. I'm glad i am watching this video because I don't have a grinder to cut off that damn "Dilly Dally"
So how loud is it just idling? This is a little specific but does it exceed 60 decibels at 50ft? Trying to get approved for a off road vehicle pass to access trails at national parks. Lol
It’s loud, to loud
With the jba short headers mate up to the stock exhaust
I think they do, but I’d double check.
KUSTOMBLACK MOTORSPORTS I definitely will I’ve got a broken bolt and thought I’d just replace them while I’m at it . Thanks for the reply and doing a killer build on a ram man
Did you have any problems with the intermediate steering column rubbing the headers on the driver side
No problem
Just put AMR long tubes on my nineteen ram new style with a catback. Sounds ignorant as does yours! Good video!
Hell yeah!
I share the garage with my daughter, I'm not rich. Hot damn that had me rolling!
Can you tell me the difference of a 1 3/4 and 1 7/8 longtube header please and thank you
One is bigger than the other
I see the resonators are still installed, is the muffler still there? Cuz hot damn, she sounds mean.. looking to do the same thing with my 2014
Haha the end right on sounds sick I watched this video to see how to install this is my next uograde,lol I see I’m on my wife’s google account
So I just did the same installation on my truck. Question does your valve train sound louder with the headers compared to stock manifolds?
Yes it will sound a bit louder
“Oh hell no they put a dilly dally on here!” Lmao
🤣
Dumb question but here goes...so I'm replacing shorty headers with long headers and the problem I'm having is that the oem bolts are to long due to the mounting flange is not as thick as it was on the Mopar headers....what is the resolution to this?
Don’t use oem, use ARP or equivalent.
OK sounds good...next question is... heat shields are not used for aftermarket headers? And Is a tune necessary and needed?
No but u have a garage bonus. No problem at all dog!!!
Trying to install my shorty headers on my truck as well but can't seem to get to those bolts on the bottom and on the corners with the clearance. Is there any tools that helped you out or anything you can reccomend? Thanks
Swivel joint 😁 and gloves to save the knuckles.
Wait till you get a cam. KRC 210x advanced 4 degrees, or sidewinder would be your best bet for torque, with the sidewinder being more plug and play than the KRC. This is only information that I've read, so do your own research.
What did you do with dipstick? I had to cut the mounting tab at bottom. Then bent a little bit and went between the primaries
Lokar ED-5015 flexible dipstick tube.
I might sound kind of dumb, is that a nos blow out that comes out your hood? I want to do it to my hemi
If so best place to get it
I got my kit from moes performance, it is nitrous.
Man this was hot damn funny. Also made me just pay for someone else to do my new exhaust 🤣🤣🤣
I don’t blame you 🤣
Hot dam...... That's one hell of a ram.....
His voice sounds like he’s possessed lol!
Do you edit your voice separately or is the whole audio tone shifted? Asking because I'm curious if the exhaust sound is shifted or not in the video
Not edited unless I’m talking, you may like this other channel better. I’ve changed the exhaust even more ruclips.net/user/HotDamnRacingTeam
Little chop 😁 ruclips.net/video/yTqRLsupGz4/видео.html
What's your opinion on installing longtube headers on with current dualed out super 10's (outlaw) + resonator delete? Any changes in sound possibly
Definitely louder, gotta try it to see if you like it. It will probably sound great.
@@HOTDAMN will do.thx
the sawing face: bravo!
Is your voice powered by a v8 because it’s the deepest sound I’ve ever heard.
V8 cammed HEMI 😎
KUSTOMBLACK MOTORSPORTS lol awesome
Wants some new headers for my 5th gen . I’m thinking AFE or the ARH in moes sight. Or you thinking something else. Respect what you’re doing and that’s why I’m asking. Thanks from the North!
Both of those choices are fantastic. Choose one of those. Thank you sir!
Sounds awesome Hemi brother !!
Hot damn hell yeah 😎
where did you get that diff girdle please?
purplecranium.com
No header wrap?
Sounds bad ass what type of exhaust mufflers do you have?
Yeah boi
Take dem resonators off, slap a 40 series single in dual out Flowmaster on
im looking at getting the jba longtubes but they dont show the y pipe on the website?
I’m usin my headphones 🎧 Damn it sounds super sick 😍.. holy fuck 😍😍
Oh hot damn hell yes!
HotDamn man you got me laughing!
Hot damn hell yeah! 😁
Damn that's sweet soundin. Good job.
Well hot damn bud
Hell yeah 💪
Hey did you have to put a transmission cooler in and a larger pan after your headers and converter was installed ?
No sir, I have been daily driving with no problems. Temps can get high in the summer and when driving hard. But the stock cooling equipment has worked fine. Just ran a pump at the track, temps stayed low.
Sorry what do you mean you ran a pump at the track ?
A pass
Just wondering, did you go back and re-tighten all the bolts?
I would never have the patience you had doing this.
Are the gaskets that come with the jba headers good or should I buy oem ones?
Oem
Your nuts bud. Love the videos
Hot damn hell yeah!!
Can’t wait to see a drive away video with this setup! I already have a Carven competitor setup and am looking to get a custom offroad y pipe for my stock headers
I definitely got to get that done, I need to find a safe location. No traffic
????? You did long tubes and deleted cats but kept the muffler and resonators
Ya, it keeps changing to ruclips.net/video/t5pBFITI3ks/видео.html
Hot Damn she sounds Good!
Hell yeah!
Hot damn!!
Hell yeah 💪
What did you do about the dipstick issue? That’s the one thing holding me back from doing this. I’ll be damned if I have to mess with them hot damn motor mounts.
Lokar flexible dip stick tube, haven’t installed it yet.
Where did you get that engine cover
How's the quality of the headers?
Pretty good, they do the job well. But they are far from perfect. It can be a pain in the ass. ARH is the way to go for ease of installation.
Hall did you re-tune for long tube headers?
Custom tune, you can go to a local shop or get an email tune.
HOT DAMN !!!! 😂🤣 good video tho thanks it will help when I do mine.
Hot damn hell yeah!
Yo hot damn man whats up...got the long header with super 10 install finished...sounds bad ass...some think its a little loud lol...but why should I go with hemifever tuning? And not a tuner shop close to me? I'm in the process of making my selection and would like your genious hot damn input!!!
Hemifever I guarantee will make it run better and faster just on experience alone by email/remote tune. All the fast trucks are email tuned. Hemifever will take you through a process of data logging. Hemifever will be able to see how it actually runs daily driving and racing. He will make the adjustments as needed. Drag and drop the email tune attachment, upload and done. So easy and right in your driveway. Free revisions.
Its funny you say that...I was gonna go with hemifever tuning from the get go but I wanted to hear pricing from around the Cincinnati/Dayton Ohio area and their prices are ridiculous....decision made 🔥 hot damn genious 🔥 lol thank you sir!!!
Man... must be nice working with NO rust lol
My truck was totally rusted, I fixed that mess.
BUUUUUULL SHIT! You live in AZ. You wana see what my truck looks like? You would of snapped every manifold bolt and been heating the fuck out of those clamps to break em loose. No penetrating oil in the world would help you here lol
How the hell do you get the long pipe off the stock y pipe??
Take the muffler off and pull it out 😎
What are you valve cover things called that day hemi and where did you get them
3gcustomz
Hot damn badassery
Hell yeah!
I just did it. Broken bolts... get a welder. Only way brother. 2 of mine were broken before I touched em.
Regardless of bolts, it's still a lot of work. Be prepared. The dipstick is tricky as is the shift cable. Get a lot of insulation on anything near them header. Mine were wrapped. Then I wrapped the lines etc that were near.
Did that void your warranty??
Yesssir 🔥🔥
Do you think the factory y-pipe could work with these headers with a bit of cutting and some exhaust clamps? I've got '16, 4 door.
Sounds great!
Oh man. You are funny as hell, jaw dropping sound literally 😆
Finally got mine in today...... I dunno if “pain in the dick” does this install justice. There were cuss words coming out of my garage that ain’t even supposed to go together. FML 🤦🏼♂️ but hot damn hell ya it’s worth it. 🤘🏻
Hell yeah!
I'm about to try this install on my 2014 ram 1500. Just really nervous about breaking those manifold bolts. Any tips to avoid that?
@@englishbulldog94 patience and wd40 brother.
@@englishbulldog94 if they’re not broken already they come out pretty easy. Don’t be nervous bro, nothing you can’t handle. You’ll be stoked when your done. Def worth the work
@@ShadyOne9 hell yeah bro. Those bolts breaking will be the only thing that makes me take it to a shop. Got quoted $500 for just install so looks like I'm gunna be trying it myself soon lol
How did you get the custom tune?
Add the custom tune with purchase, if you already have a diablo then buy a custom tune off Hemifever’s website www.moes-performance.com/mobile/Product.aspx?ProductCode=T2-PCM-EXCHANGE
11:52 😂"HE NEEDS SOME MILK"
How much of the stock exhaust pipe did you cut off?
What y pipe did you use for the jba long headers?
Discontinued JBA y pipe.
@@HOTDAMN do you have any ideas on what one will work that's close to it?
@@HOTDAMN we order one and it wouldn't line up.
“I gotta deep voice”
🤪
This is some funny s$&t! This dude makes me laugh every time!
Where did you order your off road y pipe. I need them for a 06 dodge ram 2500 5.7
Let's see some Hawt Damn performance gain data! BTW Your a mechanic!
I can say the 0 - 60 is much better
"Ahhh hot damn horsepowahhhh" 🤣🤣🤣
Good hustle man!
Is this your real voice by the way? Kinda sounds like mine 🤣
🤣
Hey! Great video. Was looking to get a set of these, but having hard time finding the y-pipe, any chance you recall where you got yours? Thanks in advance and great looking truck.
Unfortunately the y pipe is discontinued at the moment I believe.
Hot damn great video man
Did this pass state inspection?
Ron Bernard wonderin the same thing
Nice hack saw face, way to get on that.
Lmao 😂!
That sounds hot damn nice 👍
Hell yes!! Thank you!
Hot damn good video bud. Thanks!
is this JBA from here in San Diego?
Not sure, I ordered them through moe’s performance.
Do you remember the part # for the kit? Went to Moe's and didn't see the jba headers but I did see the y pipe.
Your not required to have the catalytics?
hardracer yes every on road vehicle in the us is required to have catalytic converters if it came with one