Hell Cannon Dud Volume 2
HTML-код
- Опубликовано: 8 апр 2021
- In our second video on Hell Cannon duds, we experienced issues with the fuzing mechanism. We think we've resolved the issues and will hopefully have a follow-on video in the coming weeks.
Our thanks to Global Ordnance for making this video possible.
You can see our first video on the Hell Cannon here: • Syrian Hell Cannon Mor...
Music
Teknoaxe - Revenge of the atari overlords
Be sure to check out his channel for great original audio content. - Развлечения
*Roses are Red,*
*Violets are Blue,*
*I'm glad you Made it,*
(With all your fingers)
*To Hell Cannon Dud, Part 2*
We really hoped our volley of rounds in this video would produce one successful blast. We figured out that our safety mechanism was actually too good and inhibited detonation. So, we are building 2 different prototype fuses for the next trip to have a better buffet of explosive flavor. Theoretically anyways.
@Jake Lambuth maybe an impact fuse with a backup time fuse?
Jake,
Basically, you're saying that,
The round wasn't getting the muzzle velocity to arm the fuse(s) ?
Love the content - entertaining and educational.
Sometimes failure is more informative than initial success.
I have faith you guys will be able to get those rounds to detonate on impact.
I'll give you guys credit for posting your failures. Pretty rare for channels to do that.
I abssolutely love that you show how it really is when developing something and not just showing what's finished.
Also why apologize? I think this is an amazing video that is very informative and I gotta say it's perfect.
It's not just the explosions, we subscribers love, it's also the engineering behind them!
You can learn much more from failure than success, absolutely love your channel.
So true. I hate admitting failure. I really do, but it comes with the territory of experimentation. I had professor in undergrad constantly remind me that bad researchers never admit they are wrong.
add additional timing fuse as a backup, so if the primary fuse doesnt fire then the timing fuse will detonate the charge after the projectile drops...
I like that. Charges are standardized so hangtime can be max-min'ed. if your MAX hangtime is 5.5 seconds, do a 6 second delay manual fuse. If contact does fail, It'll dig in and pop. Worst case scenario you got an airburst close to the deck. That's not a bad thing.
worst thing would be a short launch and detonation near the launch site😬 nope
@@jonaz15 I'm sure they are well outside a generous exclusion zone. Unless you are in Syria no reason not to be. They mentioned timed fusions in evolution 1 I think they just need to combine tactics.
Damn makes you think about how sophisticated those guys in the war making these actually are .... they don’t have half the technical amenities these guys have and there stuff goes boooooooom
If you watch the vids online of the indirect fire systems being used, you will see they use 3 in a prong config to insure det.
Great catch. Since the fuzes are smaller than the diameter of the "mortar" round, the risk of the round hitting on the edge of the round and not properly impacting the fuze is pretty high.
I highly enjoyed watching this particular video.
Been waiting for this video or years .... we need round volume 3 asap
I'm working with our good friend Jen at Texas Tactical Gear on making several new fuses. With more designs means better chance of success.
@@jlambuth how about a shotgun primer with a striker that is fired by impact? sometimes simple is better.
The opening was hilarious
Now he will never stop this 😄
I really hope that dance wasn't with pressure fuses. Imagine if he dropped one
@@Coolnventions Those fuses were impact fuses and I made them to go off at a certain amount of minimum force. Ol Sean isn't strong enough to shake one active. Plus, we discovered our safety mechanisms were TOO good and basically made them worthless.
🎶La Boom Maracas 🎶
When Sean describes what everyone's been up to at the end of the video, it's like listening to a man with a bowl cut verbally dictate one of the old David Dees photoshops.
Man I love your content! Keep up the good work!
that is the scary part diffusing the dud. walking up to it, touching it,
Missed these last two vids but I love them
By the way, this is related to another video, but in the thermite grenades saga some people have commented that they'd like to see a ceramic flower pot being used to direct the combustion products and heat, and I just remembered that the normal metal can bodies can be coated with a really simple material that acts as a temporary refractory ruclips.net/video/FmEb1YZScxc/видео.html
Bob
@@zokhrozzWoomzy what?
i was so waiting for this thx guys
I'm sticking with y'all cause I gotta see that blast eventually FINALLY!! The bigger the better... ;-)
mortars as musical instruments....sure, why not.
Tchaikovsky before composing the 1812 overture
Lmao
Thanks 😊!!!
Copy the panzerfaust fuse. In short, a block of cardboard is stopping the firing pin from hitting the primer. When it launches, a weighted sleeve falls backwards and a snap ring opens. On impact, the snap ring catches the weighted tube, and the entire assembly crushes the cardboard, allowing it to strike the primer.
When I was a dumbass kid , literally a teenager I did something similar with a nail, 12ga shell, bamboo tube and coat hanger tail, a little duct tape. I got to idea after seeing a improvised Vietnam toe popper in a combat manual
Some lovely ASMR at 6:15 of all that dirt raining back down.
Great video gentlemen! Why not paint the projectiles flash orange in order facilitate easier tracking and visibility on the ground. This will make them easier to see on the ground in the event they fail to detonate.
We hoped the blue would help but.........yea. Wasn't a hit. We are going with wild colors next time.
I think it is exceedingly cool that you shared your failure. A lot of RUclips content creates a very unrealistic picture of the nature of experimentation.
Cheers!
These fuses are fabulously made... 🧐
The germans had a pistol grenade launcher (WW2) with a very simple fuse that seemed to work very well!
best channel on RUclips
ماشاء الله يعطبك العافي
Hey, How about running a few feet of detcord through some washers wrap it around a pipe and check the frag pattern ?
Such is the nature of improvised kit
4 seconds into the video I'm thinking.... they let this guy have destructive devices?!
I'm just kidding... nothing but love
A+ for effort
Start every vid you make with a funny crazy dance
Don't worry about failure, the video was still interesting to watch.
Insha'Allah! The next hell cannon vid will drop with a bang!
Gorgeous
I am 100% on a watch list
Don't fret about the failure of these rounds. It made no difference to us your viewers. The rather dull 'thunk' as one of the rounds hit the ground was equally as entertaining, plus, it means you've made a Part 3!!
Prairie boy here I'm putting my cheap beer on it being a badger hole
drop test the fuse attached to a concrte filled body , like the Navy did to fix the mk14 torpodeo contact fuse
I would paint them a very bright color. Just in case they dont go boom. Just use a drone to search instead of spending all day searching in cactus getting ticks. Then once you find it just walk out towards the drone. Could even guide them too the spot.
Are you guys sure its hitting the fuse. Not sure what method you are using but if I may suggest... it's kind of crude but it works...shotgun primer and a nail.
Exactly man! KISS principal.
oh boi i sure am exsited! 6k oway from 100!! gg
Make a special ordnance that you could put in a small camera like a go-pro. Then launch it with the Hell Cannon.
Sounds like your saying it for the right reasons. It's not cultural appropriation, nor is it religious fanaticism. It's just a bit of cultural fun with words. Right with you.
Great! That means we would have Hello Cannon III 😎👍
100% absolutely. We are making rounds as we speak.
@@jlambuth thank You so much! Continue with the Reserve 😎👍🥇
Are you using an inertia striker or spring assisted pin.
Always remember the WWll torpedoes that didn't fire on impact.
It turns out aluminum pins were the answer. Fascinating story.
so what about aome thing simple... such as a contact detonator like a shotgun shell configured to set off the primer / powder charge on contact .. or would that not survive the launch ?
A video idea, use themite to cut a lock like in breaking bad
Ok. Its been 2 weeks. I miss you guys already. Just light a firework and say hi and talk shit. I miss you guys.
Gentlemen, might I suggest The Schenkl Percussion (impact) Fuze from the Civil War era? I do believe the trouble of projectile angle of impact would be negated.😊
You know, I had to look this one up. I know a lot about booms but not everything. I learn something new every day. I'll have to see if I can make a modern version of this and apply it.
@@jlambuth Im glad I was able to help. I learned of it from the book
'The Mechanical Fuze and the Advance of Artillery in the Civil War' while I was researching drop fired mortar technology for community defense. The TV series Jericho was the inspiration, lol.
You need to call Syria for tech support. ;-)
Did he really just say “it came down in a perfect perpendicular path with the earth” lol.
Yeah, the earth represents the horizontal line while the projectile represents the vertical line, hence why he said perpendicular
@@facelesslivegaming5976 would there be any other way for it to fall lol.
@@shanek6582 😂😂😂
god willing
Man, youtube recommended hates this channel 🤣
Nice
Is the explosive shake weight a future item we can buy?
Not going to lie, UXO freaking scares me.
Cool
My guess is it’s the soft ground but keep up the good work
I know im in the right chanel wen i see one of the host dancing LA CUCARACHA with 2 IED. HAHAHHAHAH THE BEST
God is great is a redundancy. God, by definition has to be great; bragging about it doesn't make God any greater. I always felt that shouting it out at every opportunity as trying to ki$$ @$$. God knows my grattitude and respect and I don't have to joggle his elbow constantly to keep reminding him
Every failure is a success.
Use a purple Ramset cartridge. With a plunger held away by a spring or match stick.
I do appreciate the cultural lesson. I had an asshole listening as well who said something and before I even said anything you did. Thanks! For killing my rant!!!
Maybe mount the fuse in the tail. Slug that slams forward on impact and hits like a hammer.
Assad wants to know your location!
@ Ordinance Lab is this a DD?
I have several empty tanks like that. I'll go ahead and make some inert rounds to launch out of one of my Trebuchet. I launch other darts, these should work fine too.
I know you guys have done molotovs in a can cannon but what about thermite tennis balls like the ones from the anarchist cookbook for firey Friday
Can you do the dji mini payload attachment lol I’m south of Houston if you need to use one
Any thoughts on displaying the largest explosion "you" can to us viewers?
"a small BIPing charge"
im gonna make one for the 4th of july😂
We are going to BIP this... after we move it to that hole. SMH
Hm. You are the pro's - but....
shaking rounds like this - can't they build up some static inside which could discharge and in turn make your bodyparts leave into different directions?
Make another can cannon video using can with Chuck round caps, glue to the can with improved Explosive in the chuck cap to see if it would work
Where could i sent a fuze design. Ive made some myself and they might work. Possible for 3d printing and and any machinist to make
Christians over there say that because thats arabic for god is great. people think its a Muslim saying, Muslim is a religion not a language and too many people forget that. nothing wrong with a Christian saying Allah Akbar,theyre just saying god is great in their native tongue. Great video as always, keep it up
I suggest to everyone subscribed to turn on notifications because I've missed so many videos cause they weren't in my feed
How about a 209 shotgun primer ?
What's the chances of a shape charge drone bomb test?
Can you show us how to make impact fuses? Or is that some dumb BS that's regulated?
"La cucaracha la cucaracha nanannana nana nana"
We already got a like because the Cucaracha
You should paint them blaze orange.
In the movie terminator what damage would the pipe bomb do to the motorcycle
Ops 5 and 0. But great Bang just the same
how can you gaurantee your dud wont go off on you when you approach it? what kinda of fuse gaurantees your safety? how is it no one is giving you shit about approaching a potentially hot dud? if it was me id never here the end of it
Could you not use standard time delay fuses from grenades? Or is it 100% improvised?
We are working on a bore-riding delay fuse that is like a grenade fuse. It is simply bigger so that the "spoon" fits in the bore and doesn't bother the initial ejection flight path. Def a prototype.
#notificationSquad
he sounds like swaggersouls
q
It means "God willing".
hey just so you know this never popped up in my sub page, literally just heard about from a friend. lol #shadowban things
Please use a drone to find the uxo/place charge next to it.
Also. My two cents. Try a base detonating fuse. It is easier than all-way acting, and more likely to yield success than point detonating.
That idea recently came into our planning. It's now in the drawing stage of design.
As w most artillery the problem isnt the explosives it's the detonator/ fuse.
why not put a small charge of black power in the nose of your round with a fuse that your propellant charge will ignite when you fire the round and you will not have to depend on your impact fuse.
6:02 bro probably just nuked a small animals home