4:25 Clever design. I could see this being a real product. It's big enough for all bags, and the pinch design is very secure. 10/10 print looks cool works good and every day use.
Hi, Good Video! I Will Print All But.... i always wish to have a 3D printer.. Why? I Dont Have One Well... print my name too! I Wanna Appear In One Video! And Im New Sub. -Santiago
What is there to learn? All of the multi-color single prints shown change color between layers, so as long as you can insert pauses into the gcode at the right spots and remember to change out your filament, there's not a lot more to it. It's also good to only use different colors of the same type of filament to ensure proper layer adhesion. That is, if you switch from ABS to PLA, for instance, it might not stick. Anything else?
Tbh you dont even neeed to mess with the gcode. You can estimate how long the bottom plate needs to print then set an alarm, pause the print and swap out for another colour.
@@MrBizteck Sure, but accurately estimating the time you need to pause it sounds a lot more difficult and error-prone, imo. In something like PrusaSlicer, inserting pause points at specific layers is super easy once you know how to do it. No manual gcode editing required.
Unless you're prototyping or selling prints a 3 D Printer is a gigantic waste of space time and money most things you're going to print will be fun for fifteen minutes then recycled
interesting, where do you find all the 3d models? 🤔🤔(PLEASE LIKE FOR THE AUTHOR TO SEE)🤔🤔
description💀
Links to all designs are in description :)
@@Marc3DP Thanks
2:02 I should use plastic clear sheet input won’t put any sand
Without the red slash, it's a "go ahead and look over the stalls" sign.
true
1:47 a missed opportunity for it to say “ crape diem”
I like the Karate Phone Holder and the Relaxing Soap.
Lol I normally only have 1 roll of fillament at a time but these are so funny Im going to buy a few different colours to go nuts on the signs.
Warning 18+ (months 💀)
Wow,just wow😂😂😂
Thanks :)
Ideas are a great way to learn.
Finally I can impress my cats 1:19
How are your prints so clean, wow, well done
pcbway is the new raid shadow legends bro
This came up after I had just gone to bed with a print running,
I woke the snapping noises
If you are looking for some interesting and unique models, check my designs store - MaDi Studios 👇
cults3d.com/en/users/MadiStudios/creations
HELLO!
4:25 Clever design. I could see this being a real product. It's big enough for all bags, and the pinch design is very secure. 10/10 print looks cool works good and every day use.
Yes, it looks great and it also useful :)
9:21 the Man down on the middle finger (middle finger is not good) okay.
8:11 it`s too dangerous to go alone, please, take this just in case
😄
hahahahaha
what kind of 3d printer do you use?
Prusa MK3s+
OMG banitsa is a Bulgarian word🇧🇬😂 ❤️
😁😂😆🤣 These were great!!
I wonder how many signs Marc has in his house hahaha
Many 😉
1:55 it teleported
just in case is great.
8:00 Wow, good pun.
Мщ
For the soap one make sun glasses
Awesome vid thank you
Thanks :)
3D Drucken ist echt erfunden wurden, um Sachen zu drucken, die man nicht wirklich braucht 😁
Thank you a lot 🙏. I was really charmed.
Happy to hear it :)
Hilarious! Thanks for searching these out.
Thanks :)
I love your Darth Vader
❤❤❤❤❤❤
Thanks :)
Thanks for the good info, looking good! ❤
9:21 the Man down on the middle finger(middle finger is not good) okay.
big laugh
Someome should make a scale model of the MLK momument from Boston. THAT would be hilarious.
What raft settings do you use? My prints are always stuck to the raft :(
I use standard raft settings on PrusaSlicer with 0.2 mm Quality profile settings
Cool video
Thanks :)
Can you please do tutorials you me stuff is amazing. Which cad software do you use
Can you do the name Jarquavious
Can u pls print "Daniel" in blue
how the heck you even download them without not letting you seeing the PDF
Sometimes we tend to get a little goofy
day 4 can you do falcon
i got question what type of bed sheet do you use?
Prusa PEI sheet
6:50 😂
Why did hades steal Poseidons trident
The nickname Ultima
Who uses a soap bar anymore??
Me :D
👍
Print mr person as asked on other videos
Hello, what is Banitsa?
Someones nickname :)
Cool & Funny Video 🤩😍
4:10 what just happened?
Can you please make the name Jacob 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
my name is Rietha
6:15 its sign not sing
What is the name of your 3d printer cause I’m considering buying one
Prusa
Prusa MK3s+ ( it's great 3d Printer )
Felix
Damian
my name is damien
print my name :)
Hi, Good Video! I Will Print All But....
i always wish to have a 3D printer.. Why? I Dont Have One
Well... print my name too! I Wanna Appear In One Video! And Im New Sub.
-Santiago
Thank you Santiago :)
SPARKY
Can you send me that action figure
Me encantó el culo del gato jajaj
Bist du Deutsch, Marc?
Where is the best video to learn how to print with multiple colors?
What is there to learn? All of the multi-color single prints shown change color between layers, so as long as you can insert pauses into the gcode at the right spots and remember to change out your filament, there's not a lot more to it. It's also good to only use different colors of the same type of filament to ensure proper layer adhesion. That is, if you switch from ABS to PLA, for instance, it might not stick. Anything else?
Tbh you dont even neeed to mess with the gcode.
You can estimate how long the bottom plate needs to print then set an alarm, pause the print and swap out for another colour.
@@MrBizteck Sure, but accurately estimating the time you need to pause it sounds a lot more difficult and error-prone, imo. In something like PrusaSlicer, inserting pause points at specific layers is super easy once you know how to do it. No manual gcode editing required.
😊 roblox
Print my name "sofiane",🙏🙏🙏😍😍😍😍
Can you print my username out of curiosity
Никодим
.
Bro, you’re the 100th comment!🎉🎉🎉🎉🎉
Unless you're prototyping or selling prints a 3 D Printer is a gigantic waste of space time and money most things you're going to print will be fun for fifteen minutes then recycled
THE F WORD IS NOT FUNNY
Yea it is