Thanks.. I had done some tests. However, you need to make a choice between layer height and time spent. It's a personal choice; this quality is sufficient for me. By doing more tests and adjustments, much higher quality prints can be achieved.
❓Q: ❓in this printer, when it prints in multicolor, does it do 1 color at a time per layer? I was thinking of adding 1-2 color only on some layers and starting and ending with different colors to reduce pooping. ie. in minies having a green grass base, but not having any other greens.
Each layer can use up to 4 different colors. However, your logic for reducing filament change time is completely correct. The fewer colors you have in a layer, the less time will be spent on it.
Love the crunchy pile at the end. I've been looking to get a printer that can do Multi color printing for my next one, that machine looks very good and easy to use.
@@bluepoint5786 bro it's only 600 with the Ams lite and 500 for the mini combo print quality amazing speed though the roof and it tells you what's wrong and how you can fix it creality is scared of banbu labs because they know that they can't compete and really 600 is too much 3d printing is expensive so banbu is great for the price I got that much a In less than 6 months and I don't have a job and still don't never had a job so don't complain this is starting to go on for to long most of this was a joke but have a nice day but banbu is still way better
Is no one going to mention the look of the multi color system it looks just like Banbu studio's AMS for the X1 X1 carbon and the P1P the actual printer looks like the a1 and a1 mini combined it's suspicious
🫢 ~ seeing that multi-colour 3D printer spitting out the plastic globs to its right side > flung off the table and piled on the floor, why didn’t “anycubic” think to provide a “dump” bin to sit on its right side and have a hole alined to where the printer spits, and have the plastic bits shoot up a ramp to inside the bin ~ to collect the “plastic” waste, a problem/con with those single nozzle multi-colour printers
The Bambu Labs printers are the same way, printing a waste bin is a simple task. And there are ways to minimize waste, such as using the purge for infill, or to make a secondary part with it. You can also select how much to purge with each color change. I just got my Bambu Labs P1S after having a Ender 3 for years, and I am absolutely blown away with how easy to use these new units are.
I would buy that printer just to print my own Star-Gate! 😃
Get a banbu lab they are better quality
@@JoLennonno
@@teotecno wtf you mean no
nice video but i wouldnt be happy with the print quallity on any of them prints. did you even tune the filiment befor printing ?
Yes quality is definitely worse. I could never not have a line skip or something on my Anycubic. Glad I got rid of it for Bambu.
Thanks.. I had done some tests. However, you need to make a choice between layer height and time spent. It's a personal choice; this quality is sufficient for me. By doing more tests and adjustments, much higher quality prints can be achieved.
i feel like bambu lab folks are also apple folks 😆
So fun to see ;)
Thank you!
Wish I could get mine to print 😢
Hello I cant print the star tunnel model can you Help me
❓Q: ❓in this printer, when it prints in multicolor, does it do 1 color at a time per layer? I was thinking of adding 1-2 color only on some layers and starting and ending with different colors to reduce pooping. ie. in minies having a green grass base, but not having any other greens.
Each layer can use up to 4 different colors. However, your logic for reducing filament change time is completely correct. The fewer colors you have in a layer, the less time will be spent on it.
Good video!!
Thanks!
Love the crunchy pile at the end. I've been looking to get a printer that can do Multi color printing for my next one, that machine looks very good and easy to use.
Banbu is better and probably cheaper
@@JoLennonbambu its very expensive
@@bluepoint5786 bro it's only 600 with the Ams lite and 500 for the mini combo print quality amazing speed though the roof and it tells you what's wrong and how you can fix it creality is scared of banbu labs because they know that they can't compete and really 600 is too much 3d printing is expensive so banbu is great for the price I got that much a
In less than 6 months and I don't have a job and still don't never had a job so don't complain this is starting to go on for to long most of this was a joke but have a nice day but banbu is still way better
@@bluepoint5786 600 is not that expensive for a 3d printer 3d printing is an expensive hobby
I hope that i have one of these
While I have a Bambu A1 Combo, and can't justify a new printer yet, I may have to buy some projects from AnyCubic.
Don't they are not any where near as good as a Banbu lab just stick with the you have it is much better
How I did the time lapse. I tried it and it doesn't work. Tell me, good man.
I mentioned it in my first video, so you can get some information from there.
How much it costs to buy one?
Can you share your printer config? Its running klipper right?
I am using this version at the below.There is a good config in the orca version.
www.anycubic.com/orcaVersionDownload
@@TritonPrint3D I meant the actual printer klipper config , the one you can see from web interface
Is no one going to mention the look of the multi color system it looks just like Banbu studio's AMS for the X1 X1 carbon and the P1P the actual printer looks like the a1 and a1 mini combined it's suspicious
I have a 3d printer but its a bambu studios one
Id say its a good video but actually its just a long commercial... no creativity, just printing out what the sponsor provides...
Wow, they totally copied Bambu right down to the little build kits you can buy, 😂
It is literally the a1 combo with the x1 ams
@@JoLennon Imitation is the sincerest form of flattery.
🫢 ~ seeing that multi-colour 3D printer spitting out the plastic globs to its right side > flung off the table and piled on the floor, why didn’t “anycubic” think to provide a “dump” bin to sit on its right side and have a hole alined to where the printer spits, and have the plastic bits shoot up a ramp to inside the bin ~ to collect the “plastic” waste, a problem/con with those single nozzle multi-colour printers
Just print something. Whats the big deal?
The Bambu Labs printers are the same way, printing a waste bin is a simple task. And there are ways to minimize waste, such as using the purge for infill, or to make a secondary part with it. You can also select how much to purge with each color change. I just got my Bambu Labs P1S after having a Ender 3 for years, and I am absolutely blown away with how easy to use these new units are.
Yapachino