@@wallingtonfilming Obviously the Bluetooth will never happen, regarding psi pressure in the hose can make things a pain from moving from room to room. But the thing is how fast technology is going it wouldn't surprise me within the next 12 months they will bring out power bricks powerful enough so your corded Wagner the same one I have won't need fixed sockets, just plug it in to the fully charged brick and away you.
There's already Bluetooth on the gracos my 650 has it. But its to track the user so the gaffer knows when it's in use. My pressure gauge is digital if graco actually gave a shit about the user they could set up a Bluetooth control for the psi easily.
@@MrDougfunny87 just looked up the 650, impressive blue link app that tracks your machine (regarding being stolen) and diagnostic test how your psi is running, similar to my sander mirka deros app that's test's rpm not psi but with no GPS built in like the Graco blue link. I think Anything above £300 should have GPS tracker, hope that's the future. All the best
Only takes about 20 mins to do all the reveals in a house, you can get tape with brown paper to cover the pvc and abit of the window. A good site already has the pvc and window taped up already for you
Thx for the video. Any tips on mist coating fresh plaster? I’ve watered my primer to 50:50 Graco cordless to 800-1000psi My backroll is peeling on some inside square set ceiling corners. I suspect drywall dust
Don't you tape hinges? ? Pluss I change tip to do frame as emulsion tip to wide of fan pluss you get orange peel finnish on emulsion tip...rad hanger s kept clean on my site so I cut in roll mine
Doing woodwork with mush is a bit naughty like i know he will be under coat/dac after but i got kicked off a job once fir using mush on bare bits of stringing whilst cutting in
Go around with your 18inch roller and make your paint like piss. Roll the walls the next day. Should take about 30 mins to roll everything. Nice roller finish, so can up if any knocks happen before snagging before hand over
That's the problem nowadays painters that have no experience in spraying or just plain ignorant will always take a dig at the finish. I love it too it's mint 👌
I got mine back in September I think when they first came out. I use an FF517 tip at 2.5kpsi and spray the whole lot. We do have to roll the walls out after but just a pissy coat does the trick. I swear I will never roll a ceiling again. For mist coating it's brilliant but you do need power near by for charging.
Hey candleman subscriber here long time Watcher of your videos I'm a pro painter about your age from the states 30yrs experience, did I miss something what got you into spraying??? You were a long time brush and roll man like myself I was just curious
Cracking video as usual. How long did the plot take and what was the price? Been working away and are fancying coming back home and hitting some new builds.
I acrylic all my frames staircase first .. Then I spray walls and ceiling... I would try keep rad brackets clean and I put dust sheet down the stairs..
I take it you undercoat over the emulation as it usually goes a blue colour if you dont Also is this filmed on a Sunday as sites im on have people in and out all day
Depending on tip size ie 15-17 ect that will set pressure regardless as long as your not getting tailing, turning pressure up only wears tips out faster and cause more mist-bounce back, always start lowest pressure without tails in paint spray pattern, been doing this 20 plus years only watched to see cordless machine, found it painfull watching
First job spray all your machine with wd40 to give an oil coating to stop all over spray splashes sticking to it, cleans of easy then 410 tip blue filter not right for wallop , needs a black filter and 515/517 for cutting in Wrong sequence for me Finish lids and other white emulsion in cupboards wardrobes Then spray doors /spindles Then walls last for me I still do walls old school cut in , mini roller , 15 inch spraying cutting in does not flood all your gunning skirting tops casing edges etc Iam always learning trying different ways but this is how I do em and have been for 4/5 years Spraying makes sense , quality speed eliminates coats on doors and most of all fatigue
Hi Candleman,ignore the ignorance of some of the people who are being negative 🙄…am opening a decorating merchant shop Treehouse Decorating Merchant if you fancy looking at doing some business with me😉
Well me old China first of all I have to admire what you do absolutely brilliant people don't realise how hard new build plots are ball ache from start to finish there's not a tradesmen out there who could say different I just came of a new build last week and mate it near killed me and I'm 40 yes plus at this game no more I'm happy working for Mrs Jones as you used to say and believe me I can make more money than in new builds the only downside is you have to go out at night after work and do the pricing then get the paint for the rest of the week but the tips are good so mate I take my hat of to you there is guys I know in there 30s couldn't do what you do week in and week out from you're mate accross the pond mick
Agree i think doing new build plots house bashing is a young mans job. Hate that type work now. Use to love it .no power .dirty plots .other trades always about
@@ProfessionalPainterDecorator agree i dont patience for site work anymore , even if im in a plot on my own . The woodwork usually shite cause chippys are on price too and dont give fuck painters sort . And dates finish plots always changing to fit there stupid programme for CML , i like new build work for private builders cause they give you time do nice job , and dont mind refurbishment projects even doe other trades there ,not as bad as new build plots .
You’d be better off using the black filters and say a 516 tip for emulsion. The blue filters and smaller tips ( say the 410 you used ) are more for fine finish work i.e woodwork. I think also, you’ve just shot yourself in the foot! Openly admitting to coating up the woodwork with emulsion 🤣🤣 for the world to see.
I don’t think the re dec part is on their priority list to be fair! Tosh it in, get your money and, onto the next one. This is exactly why i don’t/haven’t done any new builds for years, i take far too much pride in my work. Horses for courses and all that 👍🏻
Yeah I was surprised seeing him use a (0.010) tip. Most of put 30% water in to apply contract to bare. I would use a 515 at 10% water, but you going at a faster pace, found his control nice like hvlp spraying
517 blue tip between 1800 and 2000 psi all day long for finishing the emo some times I just turn the machineup full wack when iv got the energy to run through the units like a madman. 312 lp tip for the uc. Can't go wrong. The accy dosnt block up like on the 310 tips so u don't have to change filter in the gun. Just switch tips easy..
Nice mate been looking at them for ages
Nice job Mark, hope it pays off for you!
I recommend when spraying buying 25L buckets that plasters use for your paints, one for water and one for the mixed paint
Candle are you getting plots done lot quicker with the sprayer ? Thinking of getting one myself are they worth it ?
You’re the man I’m getting a graciosos 695
Cracking work pal.. True Grafter! Bet that sprayers a game changer for tho?
Do you hover the floor before spraying
What length of hose does it come with.
Lovely job pal, nice controlled setting, I'm waiting for Graco to make a Bluetooth paint to the gun 😀
Why
@@wallingtonfilming Obviously the Bluetooth will never happen, regarding psi pressure in the hose can make things a pain from moving from room to room. But the thing is how fast technology is going it wouldn't surprise me within the next 12 months they will bring out power bricks powerful enough so your corded Wagner the same one I have won't need fixed sockets, just plug it in to the fully charged brick and away you.
@@jaxson6133 Interesting
There's already Bluetooth on the gracos my 650 has it. But its to track the user so the gaffer knows when it's in use. My pressure gauge is digital if graco actually gave a shit about the user they could set up a Bluetooth control for the psi easily.
@@MrDougfunny87 just looked up the 650, impressive blue link app that tracks your machine (regarding being stolen) and diagnostic test how your psi is running, similar to my sander mirka deros app that's test's rpm not psi but with no GPS built in like the Graco blue link. I think Anything above £300 should have GPS tracker, hope that's the future. All the best
Hi mark
Do you not mask off round the window’s
Would there not be over spray going on to the glass
Only takes about 20 mins to do all the reveals in a house, you can get tape with brown paper to cover the pvc and abit of the window. A good site already has the pvc and window taped up already for you
Thx for the video. Any tips on mist coating fresh plaster? I’ve watered my primer to 50:50 Graco cordless to 800-1000psi
My backroll is peeling on some inside square set ceiling corners. I suspect drywall dust
Probably a dry roller pulling paint off.
Don't you tape hinges? ? Pluss I change tip to do frame as emulsion tip to wide of fan pluss you get orange peel finnish on emulsion tip...rad hanger s kept clean on my site so I cut in roll mine
What kind of paint you use to spray walls and woodwork?
He shouldn't be doing the woodwork in emulsion 🙄🙄
@@dman3448 he wasn’t was he? Thought it was an undercoat?
Doing woodwork with mush is a bit naughty like i know he will be under coat/dac after but i got kicked off a job once fir using mush on bare bits of stringing whilst cutting in
But wouldn't the roller leave a different finish to what you've cut in ?
Go around with your 18inch roller and make your paint like piss. Roll the walls the next day. Should take about 30 mins to roll everything. Nice roller finish, so can up if any knocks happen before snagging before hand over
Hi mate, do you get any warning when the battery is on the way out or does it just stop? Looks a nice machine btw
To be honest I’m not sure 🤔 I let it get 1 bar then changed it. 🕯🎥☕️🚬
You feel when the battery is getting low. The pump stays on longer to try and keep the pressure up. I learnt by ear after a while.
You do know lads are going to get jealous and start digging at what you sprayed been spraying now for over 2 years and I love it
That's the problem nowadays painters that have no experience in spraying or just plain ignorant will always take a dig at the finish. I love it too it's mint 👌
Fuck em
I got mine back in September I think when they first came out. I use an FF517 tip at 2.5kpsi and spray the whole lot. We do have to roll the walls out after but just a pissy coat does the trick. I swear I will never roll a ceiling again. For mist coating it's brilliant but you do need power near by for charging.
Hey candleman subscriber here long time Watcher of your videos I'm a pro painter about your age from the states 30yrs experience, did I miss something what got you into spraying??? You were a long time brush and roll man like myself I was just curious
you know what they say, if you want to play with the big boys adapt improvise overcome. 🕯
Cracking video as usual.
How long did the plot take and what was the price?
Been working away and are fancying coming back home and hitting some new builds.
I’ve been told not to discuss money 💰🕯☕️🎥🚬
Do you spray all woodwork first with primer or undercoat first??
Looks like emol to me
I acrylic all my frames staircase first .. Then I spray walls and ceiling... I would try keep rad brackets clean and I put dust sheet down the stairs..
Don't you think it puts the fun back into painting Mark??
I love it mate 🕯
I take it you undercoat over the emulation as it usually goes a blue colour if you dont
Also is this filmed on a Sunday as sites im on have people in and out all day
Can you use emulsion paint instead of undercoat and do you gloss over the emulsion later on
How did you keep the almond white emulsion off the white ceiling
You can ,but gloss will look shit.....
No
But you sprayed the wood work with emulsion?
Can i do apprenticeships sir?
No stopping you flying through them plots💷💷💷💷💷💷💷💷💷🕯🙋🏻♂️
Bad ass
Hi mate thinking of getting one of these is it still working well
@@jaronefarrell3047
Game changer, you will need plenty of batteries and the pump only lasts around a year
will the battery last for one 5 gallon bucket? I love cordless idea
Did u tape up the hinges or emulsion them as well 😅
Them kind of plots require hinges painted as they come white but with silver screws and clients rather they be glossed
Use vaseline
Depending on tip size ie 15-17 ect that will set pressure regardless as long as your not getting tailing, turning pressure up only wears tips out faster and cause more mist-bounce back, always start lowest pressure without tails in paint spray pattern, been doing this 20 plus years only watched to see cordless machine, found it painfull watching
So much bending. Why not use extension?
First job spray all your machine with wd40 to give an oil coating to stop all over spray splashes sticking to it, cleans of easy then
410 tip blue filter not right for wallop , needs a black filter and 515/517 for cutting in
Wrong sequence for me
Finish lids and other white emulsion in cupboards wardrobes
Then spray doors /spindles
Then walls last for me
I still do walls old school cut in , mini roller , 15 inch spraying cutting in does not flood all your gunning skirting tops casing edges etc
Iam always learning trying different ways but this is how I do em and have been for 4/5 years
Spraying makes sense , quality speed eliminates coats on doors and most of all fatigue
Only a matter of time before you get pulled for the overspray all over the deck to 😉
Hi Candleman,ignore the ignorance of some of the people who are being negative 🙄…am opening a decorating merchant shop Treehouse Decorating Merchant if you fancy looking at doing some business with me😉
Where's that goings to be? Sound Like it could be ideal at Centre Parcs.. they have treehouses ;)
Well me old China first of all I have to admire what you do absolutely brilliant people don't realise how hard new build plots are ball ache from start to finish there's not a tradesmen out there who could say different I just came of a new build last week and mate it near killed me and I'm 40 yes plus at this game no more I'm happy working for Mrs Jones as you used to say and believe me I can make more money than in new builds the only downside is you have to go out at night after work and do the pricing then get the paint for the rest of the week but the tips are good so mate I take my hat of to you there is guys I know in there 30s couldn't do what you do week in and week out from you're mate accross the pond mick
Cheers mate much appreciated,
Hope all is well at your end keep the flame 🔥 burning 🥵
Agree i think doing new build plots house bashing is a young mans job. Hate that type work now. Use to love it .no power .dirty plots .other trades always about
I couldn't do new build work.. too messy with other trades in the way for me, it's bad enough doing private house refurbs.
@@ProfessionalPainterDecorator agree i dont patience for site work anymore , even if im in a plot on my own . The woodwork usually shite cause chippys are on price too and dont give fuck painters sort . And dates finish plots always changing to fit there stupid programme for CML , i like new build work for private builders cause they give you time do nice job , and dont mind refurbishment projects even doe other trades there ,not as bad as new build plots .
Emulsion woodwork oh no man 🤦♂️🤦♂️🤷🏽♂️
Its possible, he not going to live there
@@war3405 🤦♂️
@@war3405 😂😂😂
Ino ffs
All over the windows kitchen cabinets etc 😂
Cant beat Emulsion all over the wood work !!!!!!
Fucking redrow….
Trust you to pop up on here Joe.😅
You’d be better off using the black filters and say a 516 tip for emulsion. The blue filters and smaller tips ( say the 410 you used ) are more for fine finish work i.e woodwork.
I think also, you’ve just shot yourself in the foot! Openly admitting to coating up the woodwork with emulsion 🤣🤣 for the world to see.
I don’t think the re dec part is on their priority list to be fair! Tosh it in, get your money and, onto the next one. This is exactly why i don’t/haven’t done any new builds for years, i take far too much pride in my work. Horses for courses and all that 👍🏻
Yeah I was surprised seeing him use a (0.010) tip. Most of put 30% water in to apply contract to bare. I would use a 515 at 10% water, but you going at a faster pace, found his control nice like hvlp spraying
517 blue tip between 1800 and 2000 psi all day long for finishing the emo some times I just turn the machineup full wack when iv got the energy to run through the units like a madman. 312 lp tip for the uc. Can't go wrong. The accy dosnt block up like on the 310 tips so u don't have to change filter in the gun. Just switch tips easy..
slags off the traveller community / cant be arsed to plug an airless system into the mains / horrible boomy audio as usual. keep em comin fella haha