Now you’ve started something be a hopper kit next then extension bars then a clean shot 😂💯 I’m two years in to spraying had a few headaches to start with but I don’t look back now
Seems like a good idea you've done the right thing buying 3 battery's be nice to see how long the battery's last in real site conditions using the blue graco ltx tips . Nice one mate I glad someone has bite the bullet and purchased one of these to give an honest review 👍
The quality of the cast around the frame is shocking for how much people pay. I've got the gx21 but it's been amazing up to now. Good luck with the cordless, I'm looking forward to see how it works for you in another vid 👍🏻
And they are good goers, we've been spraying out a factory refit so the firm I'm on for bought a few of these to push the job along, spraying nasty ass sticky as shit enamel up in a factory ceiling 8 hours a day for nearly 6 weeks and never faltered, that's when I decided was worth getting me own
Keep us posted how you get on with the cordless Mark... it'll be a game changer for you. Have you flushed it through yet to get rid of the mineral oil that they put in when they test and pack it for delivery? warm soapy water a couple of times.. then clean cold water to get rid of the soap ;)
Pretty neat idea, wonder how long it would really last on a charge. The normal interior id want to use it for would be in the neighborhood of 25-30 gallons. If it could spray that much with a reasonable amount of battery's it may be worth looking into. In the past I always ran a convertible GH Graco airless with a Honda gas engine when I'm somewhere without power.
The handle is on the slant for ease of carrying, pick it up the right way and you will be able to carry it without the stand crashing into your legs as you walk with it
Best of luck with it. Agree that casting looks bad but am sure it will perform well. Have used a couple of sprayers but as I do domestic work not for me. Have a Happy New Year... Bob (Somerset)
I'm a painter and trying to work out if I should go for a cordless or go for 110v with a generator.... in our your experience, would you recommend the cordless for house bashing?
@@wallingtonfilming 😂😂😂 please can you get her do some product review vids …perhaps trying on some really tiny snickers shorts and the like ? That would make this crusty old decorator a happy man 👍👍👍🤩
Candleman just to let you know you don't need to use the tsl fluid after you use it only before mate , I've had my 390 stored away for 10 months and it fired up straight away no issues, just thought I'll save you a bit of money there on the tsl fluid
That dose look a bit on the reconditioned side that mark the main unit should never be that ropey . get a discount should definitely pay it’s self back tho .all the best 👍
I think the handle angle is an attempt to make the machine not too tall to fit in smaller spaces. I agree with plastic adjustment knob comment. But l would rethink your earth lead stance on safety grounds(groan) and use well placed zip ties instead of deleting it. New machines usually have some assembly fluff/debris in the system so lm sure youll give it a trial spray to flush it all out. Your past reviews have not pulled any punches so you will probably produce an unbiased account of the machines on site performance.
Should have bought it with the new contractor pc gun 2 finger trigger way better the this old bugger .....can't wait to see how it works out for you m8 🍻
Your Not wrong sir! The darn machine could have been much better in quality with the components or parts on it etc - like for example the casing metal finish & the plastic turn dial where You adjust the pressure(s) 😕🥺😰🤦🏻♂️🤦🏻♂️
Yep agree the newer guns are also lighter on the pull trigger I've got myself a 2 finger titan rx Pro, really light on the trigger and the new graco gun is really nice to use light in weight and also on pull trigger.
"Then you got the priming /spraying lever, which is made of plastic"....I have a 20+ years old Airlessco lp500, got it second hand 6 years ago, it has the same fucking plastic lever and never failed during those years. That plastic - probably hot pressed ABS is stronger than aluminium -. What's the problem with it? Same for the pressure knob. Those will last longer than the moving parts in the pump. For a proper review you should have made a footage about how long does it last one battery, what's the max pressure, what's the thickest material which can be applied with it and other technical stuff. BTW the handle of the sprayer is close to the side with the filter in order to balance the machine when you lift it up. Regarding Spraydirect, 3 years ago I spent 5000 in one go with them, the dickheads were not able to send me XXL overalls even with an email order, not to mention the new LP nozzles - got the old blue ones. Maybe in 5 years time you'll get the vibe for reviews, but this one is a nonsense. It's a huge progress that you started the spray application, 2-3 years ago you were bashing with a brush and a roller.
You have a lot of complaints with this machine you should be happy that you have this machine a lot of people cannot afford this machine so just smile and be happy you get what you pay for and Trust Jesus Christ as your personal savior
![YoungBoy Never Broke Again - Catch Me [Official Video]](http://i.ytimg.com/vi/KxwEXXFQMTY/mqdefault.jpg)
Don’t forget your paint strainers ! You’ll be amazed at the shut in new paint
yeah that leyland leytex is ful;l of shit
Now you’ve started something be a hopper kit next then extension bars then a clean shot 😂💯 I’m two years in to spraying had a few headaches to start with but I don’t look back now
Picked one of them up last month, very handy piece of kit and ideal when you don't have a van
Seems like a good idea you've done the right thing buying 3 battery's be nice to see how long the battery's last in real site conditions using the blue graco ltx tips . Nice one mate I glad someone has bite the bullet and purchased one of these to give an honest review 👍
The quality of the cast around the frame is shocking for how much people pay. I've got the gx21 but it's been amazing up to now. Good luck with the cordless, I'm looking forward to see how it works for you in another vid 👍🏻
Thinking of getting the cordless gx21 for site work probably using once a week on average. Wot work do you use your gx21 for?
... well done, and welcome. Let's discover and see "your" encounters....can't wait!
And they are good goers, we've been spraying out a factory refit so the firm I'm on for bought a few of these to push the job along, spraying nasty ass sticky as shit enamel up in a factory ceiling 8 hours a day for nearly 6 weeks and never faltered, that's when I decided was worth getting me own
Awesome bit of kit . You'll love it mate.
Can’t wait Mark. I’m looking forward to the review.
Nice bit of kit, always worth watching your vids to the end though Mark ; ]
BTW I think the handle is offset so when you pick it up it balances out to carry easier.
I’ve had a 390 magnum for 15 years ,not cordless ,best of all my guns ,way better than the bigger ones ,never had any problems,
Can't wait to see it on site. 👍👍👍
Keep us posted how you get on with the cordless Mark... it'll be a game changer for you.
Have you flushed it through yet to get rid of the mineral oil that they put in when they test and pack it for delivery? warm soapy water a couple of times.. then clean cold water to get rid of the soap ;)
Nice machine very interesting to see how it work. Thanks for video.
Pretty neat idea, wonder how long it would really last on a charge. The normal interior id want to use it for would be in the neighborhood of 25-30 gallons. If it could spray that much with a reasonable amount of battery's it may be worth looking into. In the past I always ran a convertible GH Graco airless with a Honda gas engine when I'm somewhere without power.
Good man nice to see you spend some of that money,you work very hard for
It will pay for its self in no time
Well done mate best of luck with the new purchase 👍
The handle is on the slant for ease of carrying, pick it up the right way and you will be able to carry it without the stand crashing into your legs as you walk with it
Best of luck with it. Agree that casting looks bad but am sure it will perform well. Have used a couple of sprayers but as I do domestic work not for me. Have a Happy New Year... Bob (Somerset)
Excellent video number 1
I'm a painter and trying to work out if I should go for a cordless or go for 110v with a generator.... in our your experience, would you recommend the cordless for house bashing?
Glad I waited right till the end 🥰
You ain’t a man till you’ve had a bit of tan ❤️👊🏻🕯️
@@wallingtonfilming 😂😂😂 please can you get her do some product review vids …perhaps trying on some really tiny snickers shorts and the like ?
That would make this crusty old decorator a happy man 👍👍👍🤩
Wait till after using a few times that silver machine filter is a lot harder to get off. Adjustable jobby
Candleman just to let you know you don't need to use the tsl fluid after you use it only before mate , I've had my 390 stored away for 10 months and it fired up straight away no issues, just thought I'll save you a bit of money there on the tsl fluid
Nice kit that boss! Yeah the charging a battery made me think, turn up all charged then and with the flexvolt 12a you should be laughing for the day.
Can you buy paint premixed to go through this machine.
Where can i get one of those Hi Viz Mark . Looking Sharp fella.
I’m thinking 🤔 surely they could come up with an ultimate airless paint sprayer unit?? One with a hopper that holds @ least 10L of paint! 😕🥺🤦🏻♂️🤔
That dose look a bit on the reconditioned side that mark the main unit should never be that ropey . get a discount should definitely pay it’s self back tho .all the best 👍
I think the handle angle is an attempt to make the machine not too tall to fit in smaller spaces. I agree with plastic adjustment knob comment. But l would rethink your earth lead stance on safety grounds(groan) and use well placed zip ties instead of deleting it. New machines usually have some assembly fluff/debris in the system so lm sure youll give it a trial spray to flush it all out. Your past reviews have not pulled any punches so you will probably produce an unbiased account of the machines on site performance.
Highest paid painter of 2021.
Should have bought it with the new contractor pc gun 2 finger trigger way better the this old bugger .....can't wait to see how it works out for you m8
🍻
How much that cost candle
Handle is like that on purpose keeps it away from your body when walking away
If u get charged 2k for something should have perfect casing on it
Your Not wrong sir! The darn machine could have been much better in quality with the components or parts on it etc - like for example the casing metal finish & the plastic turn dial where You adjust the pressure(s) 😕🥺😰🤦🏻♂️🤦🏻♂️
O you fighter !!! Lol
Im brilliant....
That is a fast charger the 6ah battery charges in an hour from dead
You’ll get all your money back plus 30%
Flash had it first, always ahead of the game that bloke.
Don’t mention flash mate he lives in candles head rent free
@@John-gg7ud the only bloke that got mark a start after he had the bullet from yet another firm. 🤦♂️🤦♂️🤦♂️ Right bad name in the game.
@@0001jayjay1 new video new firm for the candle man
4 finger gun way more hand fatigue
Yep agree the newer guns are also lighter on the pull trigger I've got myself a 2 finger titan rx Pro, really light on the trigger and the new graco gun is really nice to use light in weight and also on pull trigger.
Switch over to flat tip mukr
You slagged it off so much I’m just wondering why you bought it
"Then you got the priming /spraying lever, which is made of plastic"....I have a 20+ years old Airlessco lp500, got it second hand 6 years ago, it has the same fucking plastic lever and never failed during those years. That plastic - probably hot pressed ABS is stronger than aluminium -.
What's the problem with it? Same for the pressure knob. Those will last longer than the moving parts in the pump.
For a proper review you should have made a footage about how long does it last one battery, what's the max pressure, what's the thickest material which can be applied with it and other technical stuff.
BTW the handle of the sprayer is close to the side with the filter in order to balance the machine when you lift it up.
Regarding Spraydirect, 3 years ago I spent 5000 in one go with them, the dickheads were not able to send me XXL overalls even with an email order, not to mention the new LP nozzles - got the old blue ones.
Maybe in 5 years time you'll get the vibe for reviews, but this one is a nonsense.
It's a huge progress that you started the spray application, 2-3 years ago you were bashing with a brush and a roller.
It’s a unboxing not a review 🤡
You have a lot of complaints with this machine you should be happy that you have this machine a lot of people cannot afford this machine so just smile and be happy you get what you pay for and Trust Jesus Christ as your personal savior
Unless your out in bush pretty much useless 🤷
Unsupervised to charge your battery!?? 🙈😜