I'm not sure I can live with that kind of pressure 😉. Regardless I'm happy to help if I can and welcome to the world laser cutting and engraving! Make sure you use my FSL coupon code if a Muse is what you're buying, so you can save a bit of $
Exactly my hesitance of the Glowforge. Rotary option is important to me. A company making a full line of machines and a history of quality products is a better way to go.
Welcome to the channel. Yes the rotary tool is high on my list of new toys as well. Just waiting for someone to ask me to make something that requires it.
Thank you so much for this video, I was very leery about at the fact that Glowforge could only be used with internet, immediately turned my direction to other lasers and then your more detailed explanation to your #1 reason was confirmation for it for me. Thank you again.
Steve, you touched on certain questions that I thought to myself regarding if Glowforge went out of business what happens to my device then, and along with the data security. You brought very good points to the table. I was not aware of the Muse 3D but I'm glad I stopped by your channel ~ Thanks
Thank you for the comparison! I’m a woodworker who is dabbling in laser. I have a Ortur. It is what it is but once I make my money back, I want something more better and reliable.
If you are a woodworker then you probably do a lot of engraving, in which case a diode laser is fine. You would need a CO2 if you were cutting thicker materials, but they cost a lot more and take a lot more space.
@@patriotwoodworker6092 We may have to get into a discussion to find out why. Using a laser is definitely a big change from most woodworking tools, but it shouldn't be overbearing. Happy to help if you are running into issues. Feel free to shoot me an email.
I wish I had listened to you. I owned a Full Spectrum Laser before, no problem! but I just switched to a Glowforge. Right out of the box, the laser didn't cut in the right side (a common, known problem, I learned later), I tried to call them to their number, never answered. I found troubleshooting on their support page, I went through it and I thought was fixed. A few weeks later it came back. I called the same thing, no answers. Finally, I opened ticket support (online), I got the answer that they will change the machine with a used one! no way, mine was less than 7 weeks old!! Asked for a refund, no-no, as "per policy" after 30 days, no refund. So, I paid 6K (GF pro) for a used machine. What a bad experience!! (yes, I'm venting, because I was left with no other option).
It's OK to politely vent here. I've heard lots of people complaint about FSL and a host of other companies from a support perspective too. While I haven't had any of these issues with FSL I think this is pointing out a couple of misconceptions. First Glowforge's implies that their laser is a turn-key unit and out of the box everything will just work. This can certainly happen, but more likely shipping bumps them around to the point where things gets messed up. Unfortunately Glowforge makes returning the unit for service as the only available option and this is fine for warranty repairs, but becomes a ridiculous expense after warranty expires. The one defense I would make for FSL lasers is that at least you can do field repairs and FSL support is decent as walking your through what you need to do to get your laser running (and most/all other laser companies work this way). Second, given the ad campaigns of companies like Glowforge, there is this misguided perception that lasers are appliances, as simple as a toaster. I fact even a basic hobby CO2 laser is a precision instrument with lots of parts that can be adjusted to get optimal performance. This means that if you are buying one then you need to be prepared for a bit of learning and tinkering. Many people seem to be upset by company support because they didn't understand this when then pushed the "buy" button. These two issues among many more are the reason I created this channel. I hope Glowforge is able to resolve your issue in the proper way.
@@artexmg FWIW I think the Glowforge is a fine laser, but the company practices are dubious in my mind. They are capturing customers and that's worse than any support issue because for the latter you can at least go on line and ask.
You convinced me even more with reason #1, having files on Cloud for me, is not a go for it. Another great reason is that I can attach any accessories and also use the machine in larger pieces...that blew my head. That's it...I'll go with Muse. Thanks for your time and have a great weekend. 👍🏻
thanks for you video explaining why you picked the muse 3D printer. I was thinking of getting one but after I watched you video am glad's I didn't. I have a small business and can't afford a lot of money.
Hopefully I didn't jade you. While I love my Muse 3D for what I do, there are many great lasers out there (including the Glowforge). The point is that you really need to do your homework to ensure that whatever subtleties a laser provides, they will either be exactly what you need or they might be things you should avoid. Honestly neither the Glowforge or the Muse 3D are your cheapest solutions, but the Muse 3D has been pretty solid for me and is more industrial than a Glowforge (though that comes with a slightly steeper learning curve). If your use case is mostly engraving you can save a ton of money with a diode laser like an XTool D1, which will do a great job engraving on most materials and will save you $1000's over most CO2 lasers. But as soon as you want to cut something , most diode lasers will limp along at best and will drive you crazy.
You made great points about the Muse vs Glowforge. However, you could buy at least 8 of the K40's with lightburn and water chillers for the cost of this one Muse 3D. Both GF and Muse 3D look great, but I speculate that if I handed you a product made from a $600 K40 and told you it was from a Muse 3D, you wouldn't be able to tell the difference.
Well, I certainly can't argue with prices. At the end of the day, a 35-40W doesn't differ much in capability from one vendor to the next. Having used a K40 in the past though I can assure you that there is more tinkering involved in a K40 vs either of these big market players. That isn't necessarily a good thing though so for some people :-) As I've always said, buy the equipment that meets your needs. There are many viewers of this channel who own one of more of these lasers and are quite happy and I'm not about to get into any sort of religious war about whose laser is best. My interest is in helping makers.
I bought a MUSE also. At first the FSL people were OK and helped in fixing a couple problems, but that was one of the first models. More recently, they have been GREAT on customer service and replacement parts with quick response. Also looked at Glowforge, but simply no support. THAT IS KEY when you get a laser. Love their simple software in the latest RE software which software is KEY too. Overall for the price, love the MUSe and we used the crap out of it. For the price it clearly is the best solution for beginners.
Thank you!! Your camplaints about Glowforge are the same ones I have about Cricut. So, I'm familiar with those issues. In particular, I know about being handcuffed to a company's services in order to use my machine. Given everything in this review, I just placed the Muse 3D with Rotary Riser option in my FS shopping cart :)
Yes lock-in is worrisome, though the GF, which is a fine laser otherwise, isn't quite the same as a Cricut. Cricut would like to you use their image service and materials, but you aren't forced in the same way. I have a Cricut and don't use their service or materials. With a GF your laser is effectively dead without being connected to their service and that's just objectionable.
We've been looking at glowforge for quite some time now but I got to thinking, wonder what else is out there? I appreciate this video. I've only known about a muse 3d for less than a day.....this video will make me slow down a bit and do some more research before purchasing anything
You are wise to carefully consider your options before spending a huge amount of money. Note that I also just uploaded this video (ruclips.net/video/VIGKy_ywAsg/видео.html) designed for the first time buyer. What you buy very much depends on what you want to use a laser for. If it's just for home/hobby work then make no mistake that the Glowforge is a fine option - subject to some of the issues I surfaced in this video, which may not be an impact for you.
Wow that was a great review Ive been looking at lasers for leather work and I did not like the idea of cloud based connectivity! And the Muse looks like the one for me!
Glad I could help! Yes the Muse can run completely standalone. The only reason to be connected to the Internet at all is for software updates. BTW, leather smells bad when engraving so no matter what laser you pick, be prepared to upgrade the exhaust.
Yeah, #1 is correct. Having to use their cloud service is a deal breaker. That's the reason I didn't buy a digital photo frame either, I can't stand that way of doing business.
Wow! This very informative video has made me pause and rethink about the type of laser to buy. I know absolutely nothing about laser cutters and wish there was a hands-on class I could take to learn more about lasers the different types, about parts, materials, what is safe to engrave or cut on a specific laser, ventilation cooling, and so on. I mainly want to cut acrylic pieces for my cake business and not have to outsource work I could probably do myself with the proper education/ instruction. I really liked this video but wished there were more inserted video clips or photos when the host spoke about certain items and showed the differences side by side and the products in operation. Otherwise the information given was great talking points. Especially think about how as you grow does your laser grow with you, connectivity and being locked into a company's setup. So in the meantime I will continue to educate myself on lasers and save money to hopefully purchase my own by 2024. Than you!
Thanks for the feedback. Of course the goal of this channel is to help you learn, so if you need details on something just ask and I’m happy to put a video together
Thanks for a good video. I agree with all your points, #1 being the best reason not to go with Glo Forge. That is a deal killer for me. I am just doing research looking in to these. It may be a future purchase at the end of the year or maybe next year. More so as a hobby with a tiny part time income.
Thinking about getting a good laser to make money here in my retirement. That's one of the best reviews I've ever seen on RUclips thank you. And for every reason you stated especially the connectivity glowforge is definitely out. I hate that business model, yeah you bought the machine now you're renting the ability to use it? No thank you.
Steve brings up a great point on vendor locking. This came up with cricut and their customer base responded loudly and then cricut completely backpedalled within a week after the two responses they put out. I am thinking about getting a glow forge but what happened after with cricut and both companies have similar business models and both have their design software online. I’m a bit weary to go with glow forge now and just holding out to see how it plays out. Going to do more research with muse 3D too.
Wish I could say I'm a fan. Bought a Muse Titan clearly no QA process at Full Spectrum prior to shipping....gantry was even missing several screws and customer service after the sale....good luck! Such a shame for the price they charge right now it's a very expensive and very large paper weight.
Sorry to hear about the issues. While I'm not attached to FSL support, or FSL in general, I can tell you that they do lurk in the channel, so hopefully they can reach out to you. From my own perspective, I have now used FSL support twice and in both cases they got back to me in the same day. Shoot me an email and I'll see if I can help you or work with you to get a tighter connection to FSL support.
Sadly, now 2 Titans since November.......the current Titan has issues with the camera, exhaust fan and air assist not working from the Titan. Zero customer service or technical support. In fact they never really reply to my now 3 support tickets only get a we will get back to you.....again since November. Total shame!
@@jamesp2791 Definitely sounds like a bad experience. Fortunately there are lots of laser companies out there and one will surely meet your needs. Some of the FSL folks frequent the channel, so hopefully they will hear you.
Thank you! I've been considering a glowforge and now that I am ready to purchase you have moved me more in the direction of the Muse. How is the muse community? Glowforge has so many platforms to talk with other owners.
Community is where Glowforge has done a stellar job. The FSL community for the Muse is a lot less organized. The good news is that CO2 lasers are all fundamentally the same so there isn’t anything a Glowforge laser can do that you can’t do with other laser. I regularly head of the GF community to see what projects people are doing and it’s generally trivial to reproduce those on any other laser. The opposite isn’t true since there is no rotary tool or other accessories and no easy way to engrave on anything thick than 1 1/2”. The Glowforge however works very well for its intended market but I would have out grown it very quickly. FSL appears to consider the Muse as an entry level business laser rather than a home appliance so the markets are different and added capability goes along with that.
Thank you very much Steve excellent thorough concise organized video. I'm looking for a laser and glow Forge was eliminated early on because of your video, having to be connected to their website to work your machine? No thank you.
Once the GF is eliminated there are many fine lasers to choose from. In addition to the Muse, look at the Thunder lasers, as well as Boss laser. They are bigger but if you are starting a small business you’re going to quickly want some of their features
Great comparative analysis. Connectivity in itself is good - it's the privacy issues that come with it are the show stoppers. And enforcing persistent connection is even worse .
It was the privacy issue that killed it for me too. If Glowforge ever changes that I'd probably buy one because the laser is otherwise pretty solid (but doesn't have a rotary attachment).
If you want a turnkey system a Glowforge is fine. But if you want expandability for things like rotary attachments then a Muse might be a better choice
You almost had me convinced to buy the muse 3D. At least until you mentioned that you have to pair it with an online account no way not in a million years! If my Internet goes out I still want to be able to work with the machine having that scheme is the most harebrained thing I've ever heard in my life forget it
Steve, Thank you so much for making this video!!!! Muse looks like a great option. I had not heard of it before your video and you mentioned some excellent points where it beats Glowforge.
Excellent information. Thank you. I'm looking for a good laser cutter to add to my tech tool menagerie. I will continue to check out more Muse 3D vids as well as competitors. I'll let you know which one.
I do think there are two important considerations. First know what you want to do with a laser. Second know the limitations of the laser you own or want to buy. There are definitely things that neither a Glowforge or Muse can do and they are different from each other as well, if you want turnkey operation but more constrained abilities then a Glowforge is perfect. If you want complete control but are willing to tinker then a Chinese K40 could be perfect. A Muse is somewhere in between
Great video. We had been looking at a Glowforge and didn’t think there was anything else out there except the cheap Chinese lasers. What is the work area of these?
The work area is the same area as a Glowforge at about 12"x20", though it’s possible to engrave on taller things with the Muse because you can drop the bottom of the laser
That was a very thorough review, and confirms many of my first impressions. I am interested in a laser cutter to cut cork fabric, enviroleather (faux), ultrasuede fabric, and leather for bagmaking. Obviously I considered glowforge, but I cannot get beyond needing to connect to the internet to be able to use the machine. Happy am I to have heard the name "Muse" at a virtual bagmakers' retreat last week. I am also considering a makeblock laserbox. Did you consider that one at all? My biggest concern is that I don't have anyone to help me, and I neither mechanically nor technically oriented. I was happy to see the control panel because I do computerized machine embroidery, and my machines have cameras, scanners, and projectors in them, as well as beautiful display screens; and the concept seems comfortable for me. But, having to replace a fan right off the bat makes me nervous. You aren't near PA, are you? Or, do you know of anyone who could help with the install, or some basic training? Everything is aiming in the direction of the machine you chose, but I don't want to a major investment and not be able to use the machine... Thank you for an excellent summary.
I didn't consider the Makeblock LaserBox, but as long as it has the features you need you will be OK. It does look very similar to the Muse and without any solid information I'm wondering if they have licensed the technology from Full Spectrum Laser. Dremel did this for their laser and FSL seems to have a history for licensing to other companies. One of the most important aspects of a laser though is power and both the Muse 3D and the Glowforge offer a 45W option, but I don't see this for the LaserBox. Regardless though it should easily cut cork fabric or most other fabrics if that's your goal. I will do a video to walk through some of the many materials a CO2 laser can cut or engrave and I'll try to cover cork fabric as well. Regarding setup, don't be intimidated. Most lasers are very easy to get out of the box and running in less than an hour. There are many videos (including mine) on setting up specific lasers. Regarding my fan, it wasn't a serious issue. These are the same small square fans that are in most equipment. FSL quickly replaced mine on warranty and I swapped out the bad one in 10 minutes with one I had sitting in my parts bin even before I received the replacement. They've gone to great lengths to make the laser serviceable without ever having to box it back up and send it back to them. They even provide the tools you need to work on almost anything in the laser. Serviceability was a question I specifically asked Glowforge when I was speaking to them and there seemed to be few self-repair options. They were clear that shipping a laser back to them for service was a common solution to many problems. For the most part, this kind of equipment is very reliable, though with lasers you can expect to have to change the laser tube after a couple years of heavy use. I did have a look at what replacing the tube in the Muse 3D would involve and it looks pretty straightforward even for someone who isn't a mechanical engineer and anecdotally, they will sit on a video call with you to walk through any service you might have to perform :-) Hope this helps.
@@TALISHAMON You could but don't bother, since I want to order some for a project I'm planning to do anyway. The cork will be fine so I wouldn't be concerned. The faux leather might be more an issue though - not because a laser will have trouble cutting it, but rather because of what it's made of. You need to check with the manufacturer to make sure that it isn't PVC-based because the "C" stands for Chlorine, which is quite corrosive to your lungs as well as your laser. I understand these questions given that you are just starting to look into what lasers can do, but rest assured that what you are trying to do will be trivial with any 40 watt CO2 laser. Keep in mind that lasers with this level of power can cut cut through a 1/4" piece of hardwood in a single pass.
@@SteveMakesEverything I received an answer to a question from the company that confused me. Could you please clarify this for me? "The software is browser based. Meaning you use the internet browser to access our control app. You do NOT need to be on the actual internet to use our machine. " What is the control app? As an example, can you place a picture of a horse in the machine, and scan that picture with the camera, and then put a piece of cork, wood, whatever, in the Muse, and place that scanned image precisely over the material, and cut as a stand alone operation? Or, if you cannot do that, can you send an SVG file from your computer to the Muse, and precisely place that image over your material, to cut or etch, without going to the internet? Do you install the software on your computer, and can you use the software independent of the internet? Are a certain number of projects stored in memory on the machine, that could be replicated without going to the internet? I thought it was simple, and that the internet is not required to operate. In reference to the faux leather material, this is what the website states, "EnviroLeather™ is made from a urethane-based TPE, formulated with no flame retardants, no plasticizers, no perfluorochemicals (PFC’s) and no antimicrobial biocides. It passes CAL 01350 for low VOC emissions." I spoke to the bagmaker today who has a Muse without the autofocus camera. She really likes her machine, and is cutting her cork bag pieces with it. We were talking about a way to cut straps or handles for bags. The bed size is the issue. If you need a cork or leather strap from 2" to 4" in width, and 26" to 50" in length, could you do it if you take the bottom off? Would you have to support the material on a platform of some sort that is the length of the strap and slide that under the unit? And, can you do it on either axis, or are you limited front to back? Can you use a large piece of fabric and cut numerous straps from the entire piece? Is there a way to keep the cut straight as you would move further on the fabric for the length of the strap? Or place reference marks somehow, through the software, to keep the line straight? Cutting straps is necessary and extremely tedious. Am I trying to get the Muse to do something it cannot do? I hope you understand what I am attempting to do, or even attempting to ask. Thank you for any clarification you can offer.
@@TALISHAMON Well it certainly looks like you're doing your homework and starting to ask all the right questions. :-). Let me try to answer some of these. First the network question, since this is a key difference between the Muse and the Glowforge. In many of my videos you've seen me use Retina Engrave 3.0 to layout how and where I want to work with objects on my laser. This is the control app FSL is referring to, and is actually hosted inside your laser. When you install your laser you can connect in one of two ways: 1) You can connect to your home wireless network and once configured you can open a web browser from any computer on the same network by typing "fsl.local" in your browser. At this point you will see the RE3 software running and can layout out your project and even start a laser job no matter where your computer is relative to your laser. (Don't leave your laser unattended while it's operating though) 2). If you want to dedicate a computer to the laser work then you can plug an ethernet cable directly between your computer and the laser. Then use the web browser in the same way. Note that if you have a wired network in your house rather than wireless you can also just plug your laser into your network router and it would operate exactly the same way as if it was connected wirelessly. In either case you would use your browser to work this laser via the RE3 control app. Next, any project you upload to the laser will automatically be stored in the laser and you can rerun any job that you've previously performed. These will stay in the laser until you either perform a factory reset on the laser (which you wouldn't normally ever do) or the jobs get automatically removed to make space for newer jobs (which I haven't seen happen so I'm not sure how much memory space the laser has for this purpose). For any project you want to preserve for the long term, you can also export it to a file on your computer and reload it at any point in the future. And the final option is to upload it to the cloud space that FSL provides, which is akin to how Glowforge handles your projects - though GF offers nothing else other than this. fluorine Regarding the camera, if all you are ever going to work with is "flat" materials like cork or leather then strictly speaking you wouldn't need the camera for normal work, since for these materials you could do a quick manual focus and start working; however, what you would lose is the ability to scan the workspace and any layout you do would have to be done with a perimeter scan of your project on the laser bed and then moving your material into place manually so avoid wasting material. My advice would be to spend the extra money for the Muse 3D rather than the basic Muse. It's quite a bit more money but you would quickly eat the cost difference with the less frustrating experience you would have without the camera. If you want to cut items that are longer than the laser bed there are a couple of options. First you can in fact remove the bottom of the laser (which is unique for FSL lasers.) However if this is what you want to do you would have to buy a longer focal length lens ($150 option from FSL, but is again something that is unique to FSL lasers). With this setup you could cut the first 24" of a long strap and then slide the material over, realign the project (with the camera that you'll definitely need for this) and then slide the material over cut the next portion. I'd suggest making a quick jig with a square edge you can push your material up against while cutting, so that when you slide it over, the cuts stay aligned with each other. Note, to save some money on the extra lens, it might be possible to create a jig that is the width of the laser workspace with a material roller on both side and a square edge in between. Then you could roll the material off of one side, cut it and roll it onto the other side. This would allow you cut things of pretty much infinite length. Hmm this seems like it would be a good project for a video. :-) Finally your scanner question. Yes, you can draw out an object on paper, scan it with the laser and then use it as a pattern to engrave or cut into material. I'll definitely do a quick video to show this for you. These are great questions! This is exactly why I wanted to create this channel - thanks for inspiring me.
My main issue with the Glowforge is the online-only software. I live in a rural area, and have internet blackouts. I do NOT want to be constrained to using the internet and a company's servers to use a machine that can EASILY be used offline if they wanted to make it work. You NEVER know when a company will go bankrupt, and relying on their online-only software is a huge issue to me. Disclosure: I don't have a laser ATM, but am looking to get one for cutting thin MDF and Plywood
These are the points I was making too. The GF hardware is great but the lock-in is not. Not everyone has a fiber line running into their house for Internet service and not everyone wants to upload proprietary designs into a cloud service which may or may not be secure
Hi Steve. Thanks for all of your great videos. quick question...I bought the muse core laser. Did not purchase the cool box. I did buy a Vevor water chiller instead. it came with a small device for the alarm outlet (no hose, cable, etc...). The muse shows a four prong outlet where the muse coolbox should connect to the laser. So my question is...Is there a cable, tube, etc...that needs to connect to the chiller? Im afraid to turn anything on ruining the laser. I just got it a few days ago. Thanks
The things you would need to measure are flow of the coolant and the should be required by the Muse anyway. The temperature of the coolant should be controlled by the chiller automatically and ideally provide an over temperature alarm. Set the chiller to 18C or so and an alarm at 22C and you will be fine.
@@treebarh5192 As noted there is a flow sensor in the system somewhere. Not sure if it is in the CoolBox or built into the laser though - I suspect it is the former, so you might need to deal with that too
Unfortunately the Glowforge is a bit closed, so you certainly won't be able to log into a GF account and pull a drawing; however, SVG drawing files are universal so create those and the Muse or almost any laser will be able to use them
Sorry, I think I answered only half of your question. As a rule the only thing you can reliably predict replacing is the actual laser tube. Most other parts would only need to be replaced as a result of an unpredictable failure. For example the main exhaust fan on my Muse 3D failed but FSL sent me a replacement very quickly. However it is a standard 120mm fan so I actually replaced it myself even before I received their replacement. All I had to do was remove the cover over the tube so I could get at the connector, and the 4 screws holding the actual fan. FSL does seem to want you to be able to service your own laser if you need to. I can't ever see having to return it for service of anything even during the warranty period - this is a big deviation from the Glowforge BTW.
Pretty much everything inside the box is available off the shelf from other places. This included things like fans, pumps, motor, belts etc. I believe even the laser tube itself is just a common part. The sole exceptions appear to be the main controller board and possibly the power supply
Sadly, I bought a Glowforge about 2 years ago. Every time I use it it irratates me having to connect to the internet to run a simple print. Often times it takes Glowforges servers longer to process the job than what it does to run it. Additionally, Glowforge was not transparent about the internet being required to run jobs. Not to mention there customer service is horendous. If my Glowforge ever needs major repairs, it's going in the trash. Parts are expensive and often times out of stock.
Well every laser has drawbacks. The thought of ever having to send my laser back for service would worry me but from a quality/reliability perspective the Glowforge seem pretty solid. The internet requirement should be a huge concern for everyone though. If yours is going to get trashed you can send it to me and I’d fix it to donate to a school 😀
@@SteveMakesEverything just my 3¢ ....BUT also the thought that your machine being dependent on the company for it to run . That should they decide to just stop supporting the software on older models. Including for it to run , have access to saved design files etc. But they can directly force the consumers to continuously but newer updated models anytime they might choose to say they will no longer be supporting older models . So that also makes the machine have no resale value because they just won't work alone themselves . It makes all those older models non functional so people that are content with useing them or bought them second hand or just the mind set " If it's still working for what I need " then never a reason to but the newest model . Lastly all those machines being non-functional they will just end up in a land fill . Rather then people being able to use them for years and years !! The Cricket machine just did that last year I think . And of course Apple has done it .. I have a first gen iPad that had continued to work fine but app creators stop supporting apps or don't make apps that can be used on older models etc. So now I have a perfectly functioning iPad that is little more then search tool and video player for now because I can still connect to the internet and use it .. but more and more webpages won't come up because they are not supported . Not sure how long but it most likely soon just be a paperweight.. that's aggravating because it has nothing wrong with it and worked for what I wanted it to do. And more company's are going that route. And it's just to keep people buying ... And of course there are customers who will always be wanting the next newest model etc. But for myself I didn't have a need it reason to buy something new when I have something that works perfectly for me . And though they think it will get me to buy something new and they want me to do that , it does not work like that for me ..they ended up loosing a customer. !! Because all that shows me is that is something they will continue to do in the future and I will always be put into the situation of being forced to keep buying the new models even though I should not have to. In reality I wouldn't still buy new generally ..new to me ..but a used older model but newer then mine that has a much cheeper price point then the newest one, us the way I would have gone anyway . Just cheap what can I say ?!! But for me it also comes down to peoples ability to buy and sell used abd second hand items that gives them a longer useable life and keeps them from just going into a landfill somewhere .. to me saving me some cash and keeping stuff out of a landfill gives me a better feeling then what I might get from always getting the new coolest model with a new Higer pricetag ever will.
@@DOCDOCFLAMINGOS Agreed - this is kind of a shifty way to capture your audience. I have many Apple devices and it does bother me that they regularly leave users behind unless they forcibly buy new hardware. I think if Glowforge ever comes out with an improved model they may do the same. Cricut does this as well though the cost of their machines isn't so high that it is prohibitive to upgrade al older machine.
@@SteveMakesEverything All very valid points and I agree 100%. And honestly I fully beleive that is exactly what Glowforge will do. Because the intention is already there in that it's customers are completely dependent on need the internet and their website for any device to even work and remain functional. And as you mentioned yes Cricket is cheeper to upgrade their craft machines, But none of their customers or anyone in general had any clue that at some point their older machines would not be supported any longer and the customers would just have a none functioning or usable device. So it was a shock I'm sure!! But that did make everyone aware that this could and will happen at any point in the future . And that any company that sets themselves up the same way , the machines dependent on the company for them to function at all, then they can and will do that exact thing at some point. If I'm wrong I will totally eat my words and say I was wrong, but I don't think I'll have to do that. And so much of what company's sell us today are totally doing the same kind of things , just not as up front of in your face. Like cell phones many of them will just stop doing any updates or security patches etc. on them just after a year or two. So if your cell is working fine and no need to replace it , but it's no longer going to be updated and security could become an issue. Well we either deal with it or we deal with buying a new cell phone!! There is a quote I have heard that goes something along the lines of "You will Own nothing , and you will be happy!". In that sure we can spend money on something physical that we own. More abd more things are dependent on the company supporting it and the amount of time they will do so is beyond our control and then we don't really own anything at all !!!
Hello Steve, Thanks for posting this video. I was about to pull the trigger on a glowforge but after watching I'm leaning towards a Muse 3d or Thunder Laser (This one is very attractive to me because I like being able to use Lightburn to control the laser, I wish the Muse would allow this too). Do you have a link incase I decide on the muse so you can get credit for the sale? Thanks for all you do!
Well if the software is important then I too would lean toward the Thunder Laser. If you do go with a Muse you can find my coupon code in the description
@@SteveMakesEverything Thank You! I do love lightburn, but if you think the muse software is as good or close to lightburn I could live with that choice! I've learned lightburn, and I'm not against learning new software. I have reached out to Muse and was offered a free upgrade to the 45W laser. I am coming from a Ortur Laser Master 2 so either way it is a upgrade. I'm just being cautious because Im about to spend 9k to 10k and I only get one shot at this. My plan is to start a business and hopefully make this a full time thing eventually. I do appreciate your input and will be sure to use your code if I decide on the Muse. Thanks for taking your time and replying!!!
@@coreymaxim4198 The Muse is more of a high-end beginner laser. It's got some industrial strength, but honestly if you already know what Lightburn is, then you are probably already beyond the benefits of a Muse and Retina Engrave 3. The Muse 45W option is really just putting a 45W tube into a 40W laser. While you likely won't see any more power, the tube should last a bit longer.
Excellent Steve. Thanks for sharing. I am trying to see the difference between the 3D and the Core models. Main reason I see is the movement of the head in relation to material. My plan is to use only flat stock for cutting & engraving, so I am not sure the roughly 50% price increase is worthwhile. Am I missing something important?
Welcome to the channel. I toiled over this decision too, but it really boils down to your price limits. The Muse 3D does offer continuous focus which is great for non-flat items you might want to laser, but it will also work for materials that are supposed to be flat but really aren't. 1/8" plywood is great to work with but is often bowed and the camera could help ensure a good print. I initially thought the camera was a gimmick, but I have grown to rely on it even for flat materials. I have no regrets getting the camera but it is definitely possible to live without it.
Steve, thanks for the great video! I actually purchased a glowforge and canceled my order with in a couple days of seeing this video coupled with posts I’ve read about a “campfire” smell and some machines arriving damaged. The last thing I want is for my space where I also do some sewing/embroidery to smell like an outdoor fire pit. I wish there was a place you could see, hear, and smell a properly vented machine in person. Do you know of a showroom demonstrating a Muse 3D? Your opinion about smells? Thanks in advance!!
If you are willing to go to Las Vegas I think FSL will give you a tour and let you play with lasers. That’s the only place you can see one unless you live close to someone who owns one and can give you a demo
@@SteveMakesEverything what is your opinion about smells? I’m aware the laser is technically burning the item to cut and/or engrave, but if properly vented do you still smell it?
@@alisonclark7540 This depends somewhat on the laser design, but you can help with a decent external inline exhaust fan. This works well to avoid any smoke smell on my Muse 3D. My SP-3624 Laser was design to have decent exhaust and that one emits no smell at all because the cabinet has fairly negative pressure
You can buy a Muse 3D laser direct from Full Spectrum Laser at fslaser.com/fsl-muse-3d-autofocus-desktop-co2-laser-cutter-bundle/. If you do decide to buy one you can save yourself a bit of money using my coupon code "SteveMakesEverything"
No matter whose CO2 laser you use you will be able to engrave on glass and metal (with a Cermark coating). Be aware though that you won't get a lot of greyscale shading on those surfaces. You'll need to work at it a bit to try to get it right.
I won’t argue with you. Lightburn support is something I’ve suggested to FSL many times. Other companies like xTool can support both Lightburn and their own software, so clearly FSL is making a business decision here, though I would argue this is impacting their sales
Hi Steve is AP Laser can be a comparable machine. I know it is pricier but do you think it is also worthy money wise. They are good company north American manufacturer and heard from user about their reliable customer service. Like to hear from you if your time permit. I currently own an Ortur and looking for a business option.Thanks in advance.
Well if you are looking for a business option, then AP Laser is in your wheelhouse because even their starter lasers are aimed at small businesses. Once you are in that market there are lots of excellent choices, and since the market overall is highly competitive, you generally get what you pay for. You might also want to look at others in this part of the market - Thunder, Boss, Aeon at the lower end and companies like Troec or Epilog at the top.
They have a separate box containing the cooling and air blower. It plugs into the laser with a cable and three hoses. if you want replace either of these function with a different unit, it can be easily done.
You cannot, which just makes me sad. I've poked at FSL a couple of times to enable this but they don't seem to be listening, even though LightBurn is so much better.
That’s a very broad question. There aren’t really huge difference between most hobby lasers. If you want a laser that is hands down the easiest to use then get a Glowforge. Realize of course that the limitations that make the Glowforge easy will persist forever so if you want to grow beyond the basics then look at a Muse 3D or even a MakeBlock Laserbox. If you really want to live on the edge then get a Chinese K40, but you’ll get a much steeper learning curve and likely have to deal with some early growing pains,but you’ll get loads of capability
I was just using an app on my iPad however I wouldn’t recommend it or teleprompters in general. I used this for only a few videos before abandoning the idea. I realized that it was taking 2-3 times as long to create a video. Just get used to collecting your thoughts an presenting in a more natural format and your videos will be better
Hello Steve!!!!!!! Is the Muse really that good since it is old technology? The EPILOG brand of lasers has similar sizes and are not water-cooled. Is there a plus to having water-cooled capability?
So a couple things to keep mind: I wouldn't say the Muse, Glowforge or anything else is old technology. Epilog lasers are the standard for sure but you are going to pay a lot more for them; however, don't assume they aren't liquid cooled. Like the Glowforge, any cooling is internal. There's still some form of liquid coolant running through the laser tube, but it is cooled internally. This is convenient because there's nothing to hook up externally, but that just means that anything needed to cool the laser is built into the box, meaning you have to live with whatever they provide, and the box will need to be bigger to contain it all. By contrast with a Muse or any other laser with external cooling you can put an actual chiller in place for better cooling. The downside of course in a satellite box for the pump and air compressor. One isn't necessarily better than the other - it's about what works best for you. You aren't going to put an Epilog on a table or even on the floor in a small apartment, but I'd have one for sure in the right situation ;-)
Do you need the water chiller?, does that mean if you do not buy a chiller you do not get an air asset nor chiller? there is no built in water idea? Thats a pretty expensive option to buy from them..I'm a little confused, it seemed reasonably priced but them cannot ell if i need their chiller Assist box...
For a Muse 3D you don't need a chiller. The laser comes with a thing FSL calls the "Coolbox" which is a separate box that contains a water pump and fan-cooled radiator and an air pump used to blow air on the work that the laser is cutting to help keep it clear of smoke and free of fire. Other lasers from FSL and other manufacturers may require a chiller though
You don’t say what the thickness or type of material is but in general you can try to do multiple passes for the cut. On a 40-45watt laser you are practically limited to about a 1/4” (6mm) in wood or acrylic. If your material is thicker than that you’d have to look at a laser with more power (and usually a bigger price tag). FSL has a number of higher power PS models, but also check out Boss Laser, Trotec or Epilog. There are 60-90watt lasers for “reasonable” prices
I engrave on metal a CO2 laser would require a coating like Cermark to engrave on. It’s possible but a fibre laser might be your better choice since on of sufficient power should be able to engrave directly
@@SteveMakesEverything thanks for your time and input! Yeah, im looking at making 200 to 300 of these on a Bullet casing for some veterans groups and know i need a consistent way to get them done. Thanks again for your time!!
Welcome to the channel and you are more than welcome for the kind words. Hopefully this helps make your decision easier if you are buying a laser. If there are specific things you'd like to see let me know.
Did you consider the Snapmaker 2.0? If so, what were your reasons for passing this option? Also, do you have any solid recommendations for an entry point that is a bit more cost effective? $6000+ is a bit out of budget. I was looking at the FSL Muse Core Desktop CO2 Laser Cutter, but I'm not sure if it can be upgraded with the 3d lenses/cameras at a later time.
I didn't looks at the SnapMaker, though this is is a good question for many viewers to have answered. The SnapMaker is a diode laser, which is fantastic for engraving most woods and some metals and acrylic that isn't clear. Combine this with the CNC router and the (all three of my workshop passions) and you have a pretty decent entry level machine. By contrast lasers like the Muse 3d, Glowforge, or Chinese K40 lasers are all CO2 lasers, which means they will be much better at cutting as well as engraving. It doesn't mean they are better for everyone because as you note, the budget can be seriously impacted by a CO2 laser, and CO2 lasers certainly won't fit on your desk. While I'd love to do a hardware review of the SnapMaker, I will at least over the coming weeks/months do a real comparison between CO2 and diode laser capabilities - not to quickly conclude that you should buy one over the other, but rather the strengths and weaknesses of both so you can make intelligent choices that are right for you. Both laser have their place.
I'm not trying to start an argument I just like help with what's wrong with my laser I spend $6,000 on this thing and got to use it 10 times now got a $6,000 paperweight
Hi Roger, I love my Muse for myself, but take a look at the landscape and get what will meet your own specific needs. There are many factors to consider - price, speed, power cutting area, camera, etc. If you are looking at a Muse what you get is a solid metal cased "prosumer" laser that is more open so if you need to repair it you can find almost all parts available off-the-shelf, which means it's usually cheaper than going back to the manufacturer. If you opt for something like a Glowforge you get a solid entry-level laser with a big community and a more secure closed/safe environment. If you want to live a little closer to the edge and get a K40 Chinese laser then you get the maximum flexibility but the weakest level of support and arguably quality of parts. Keep in mind that the real differences in the hardware aren't all that great for most 40-45W CO2 lasers. Where things differ the most are the software operation and support.
The number one reason is extremely valid. I don't know why anyone would be so stupid to buy such a product that relies on internet connectivity, it males no sense.
Great review Steve. I do not have a laser yet and have been tempted to get a Glowforge. However, the connectivity (internet Requirement) has turned me away as well. I too see that there are many happy Glowforge owners and appears to be a nice machine but I will be going with a different manufacturer and am narrowing in on a MUSE.
In the next couple of days I'm going to put out a rather long video with my 60 day review of the Muse. It's a good machine but like all others it has it's strengths and weaknesses - nothing terrible though. Feel free to use my coupon code to save $125 if you buy one
What do you recommend for me? I have a Cricut Maker cutting machine which I like and use to make dollhouse miniatures. I like it bc it's easy to use but I dislike it bc it doesn't cut small enough. I want to make miniatures as small as 1:144 scale. I cut paper and wood less than 2mm thick so I don't need deep cutting depth. I also typically use SVG files that are 12x12 at the largest but typically smaller. I am also not great with technology so I need something that's use friendly and works with SVG files. I have no problem paying you a fee to help me out and give me this information bc I don't feel entitled to your time. Thank you!
I really don't like making recommendations because if I'm wrong you'll hate me. :-) My guidance would be to stick with either a Muse or a Glowforge - both will do with you want from a user perspective and both will work with SVGs or SVG's converted to PDFs (which tend to work better). Both lasers have their particular strengths and weaknesses but both are great for home craft use
@Harriet Spencer Note that there are other brands as well. Not to inundate you but there’s also MakeBlock LaserBox, the Dremel Laser (now no longer available), Boss, Rabbit, Trotec, Epilog and many others. I’m happy to help with specific questions but only you will be able to make this choice for your needs. Most lasers for your target market will be reliable and provide the features you need. What you buy will mostly depend on things like budget and size. I’m working on a 60 day honest review of the FSL Muse 3D which should be out in the next few days. It will give you visibility into some of the things I like and dislike about my laser.
You don't like Glowforge being marketed as 3d, but you're okay with Muse not only doing the same thing but also literally putting it in the name? Since cutting, engraving, and scoring are done at different depths it actually is 3d, so it isn't deceptive anyway.
It's a fair question; however, the 3D in the Muse 3D refers to its 3D focus camera rather than anything the laser does. I wouldn't call the scoring, engraving and cutting processes of a laser "3D", since the material is flat when your start a job and basically flat when you're finished. The only 3D subtractive manufacturing process I could think of is something like a 6-axis CNC where a part with a significant length/width/height can be created from a block of material
Got to Full Spectrum Lasers web site if you are interested in their lasers. My discount code is "SteveMakesEverything" and is in the description of all my videos. When you are buying an FSL laser you can enter this code in the Coupon field when checking out.
Yes, both laser come with cameras. The GlowForge opts for an ultra-wide angle center mounted camera and the Muse 3D uses a 3D Intel camera mounted to the laser head.
This didn't sell me on the Muse though. It seems like it is lacking and needing extra items right out the box. If I had a issue with Glowforge taking designs, etc, I'd just sell the thing. The business I need it for needs internet 24/7 anyway.
Hi Angel. A couple of things. Understand that my job isn't to sell you a Muse 3D - that's up to FSL. All I can talk about is why I bought one rather than a Glowforge or anything else. This isn't a slam against the GF or a checkmark for the Muse, but rather its an understanding of what is required vs what laser manufacturers offer. If you love your Glowforge then that's awesome - many people do love them. Second, regarding extra items out of the box, neither laser really needs anything (unless you consider water an extra) 😉. Regarding the requirement for internet connectivity, as I acknowledged previously, this won't bother everyone for certain, but that's not the problem. The real problems are that once you "give" your designs to Glowforge they can do anything they want with them without any agreement from you, and more importantly, Glowforge is a small company that is subject to going out of business. If they do, then your files and the cloud they are stored in both go away and your laser is a 100lb brick. You buy convenience with a GF, but convenience can come at a significant cost down the road.
That video made me cut to the chase, until I discovered the Beambox Pro from Flux... Has anyone looked into this laser cutter? Looks appealing from the specs (bigger bed, more powerful laser than Muse 3D) and for about bit more than half the price (inc. for add-on like the rotary jig) But the company is younger and the user community smaller, so not sure about their customer service. @Steve: your videos are great, keep up with the good work!
Well it certainly looks like a pretty solid laser on paper. Something to understand is that most lasers for home/small business use will use similar, if not the same parts. So from a hardware perspective there will be few differences between any of the lasers >$4K. What matters more is how you interact with them (i.e. the software) and how well the company backs it. Trying to be as unbiased as possible I'd say the difference of 45W vs 50W is marginal as is the bed size difference. On the plus side it seems like it's got a great price, but what I would be asking them, if I was considering one, is where it was made. It's hard to tell from their site, but I believe FLUX is a Chinese company - not a huge deal from a quality perspective, though they are notorious for over-stating their power outputs. But I would worry about getting parts, service etc. if you need them, and FLUX don't seem to want you to service the laser yourself. The only defence I can put up for FSL is that they document how to do most service in the user manual. BTW, notice that you can't order one directly from them, but rather you need to use one of their resellers. That could suggest that they care enough about their customers to ensure a local presence, or it could be an alarm signal that they have trouble getting them working right out of the box. Not trying to neg them, but if you're going to spend several $K on a laser it's fair for you to ask a ton of questions. I pounded Glowforge, FSL and a couple of others with questions before I made my choice.
I was ready to buy a Glowforge but after listening to this I now am going to look into the Muse. Thank you Steve
I'm not sure I can live with that kind of pressure 😉. Regardless I'm happy to help if I can and welcome to the world laser cutting and engraving!
Make sure you use my FSL coupon code if a Muse is what you're buying, so you can save a bit of $
So was myself until I seen this video .. Good information and a better value 8n my book
@@mwp4205 best to go to fslaser.com and have a look.
Same
Exactly my hesitance of the Glowforge. Rotary option is important to me. A company making a full line of machines and a history of quality products is a better way to go.
Welcome to the channel. Yes the rotary tool is high on my list of new toys as well. Just waiting for someone to ask me to make something that requires it.
Thank you so much for this video, I was very leery about at the fact that Glowforge could only be used with internet, immediately turned my direction to other lasers and then your more detailed explanation to your #1 reason was confirmation for it for me. Thank you again.
Glad I could help!
Steve, you touched on certain questions that I thought to myself regarding if Glowforge went out of business what happens to my device then, and along with the data security. You brought very good points to the table. I was not aware of the Muse 3D but I'm glad I stopped by your channel ~ Thanks
Glad this was thought provoking. Hopefully it helps you with your decision.
Thank you for the comparison! I’m a woodworker who is dabbling in laser. I have a Ortur. It is what it is but once I make my money back, I want something more better and reliable.
If you are a woodworker then you probably do a lot of engraving, in which case a diode laser is fine. You would need a CO2 if you were cutting thicker materials, but they cost a lot more and take a lot more space.
@@SteveMakesEverything I have an Ortur together with Lightburn they’re a pain to use.
@@patriotwoodworker6092 We may have to get into a discussion to find out why. Using a laser is definitely a big change from most woodworking tools, but it shouldn't be overbearing. Happy to help if you are running into issues. Feel free to shoot me an email.
I wish I had listened to you. I owned a Full Spectrum Laser before, no problem! but I just switched to a Glowforge. Right out of the box, the laser didn't cut in the right side (a common, known problem, I learned later), I tried to call them to their number, never answered. I found troubleshooting on their support page, I went through it and I thought was fixed. A few weeks later it came back. I called the same thing, no answers. Finally, I opened ticket support (online), I got the answer that they will change the machine with a used one! no way, mine was less than 7 weeks old!! Asked for a refund, no-no, as "per policy" after 30 days, no refund. So, I paid 6K (GF pro) for a used machine. What a bad experience!! (yes, I'm venting, because I was left with no other option).
It's OK to politely vent here. I've heard lots of people complaint about FSL and a host of other companies from a support perspective too. While I haven't had any of these issues with FSL I think this is pointing out a couple of misconceptions.
First Glowforge's implies that their laser is a turn-key unit and out of the box everything will just work. This can certainly happen, but more likely shipping bumps them around to the point where things gets messed up. Unfortunately Glowforge makes returning the unit for service as the only available option and this is fine for warranty repairs, but becomes a ridiculous expense after warranty expires. The one defense I would make for FSL lasers is that at least you can do field repairs and FSL support is decent as walking your through what you need to do to get your laser running (and most/all other laser companies work this way).
Second, given the ad campaigns of companies like Glowforge, there is this misguided perception that lasers are appliances, as simple as a toaster. I fact even a basic hobby CO2 laser is a precision instrument with lots of parts that can be adjusted to get optimal performance. This means that if you are buying one then you need to be prepared for a bit of learning and tinkering. Many people seem to be upset by company support because they didn't understand this when then pushed the "buy" button.
These two issues among many more are the reason I created this channel. I hope Glowforge is able to resolve your issue in the proper way.
@@SteveMakesEverything thanks for your reply. It is so true!
@@artexmg FWIW I think the Glowforge is a fine laser, but the company practices are dubious in my mind. They are capturing customers and that's worse than any support issue because for the latter you can at least go on line and ask.
@@SteveMakesEverything yes, I love the machine and the community, but I don think the same of the company exactly for the same reasons you mention.
You convinced me even more with reason #1, having files on Cloud for me, is not a go for it. Another great reason is that I can attach any accessories and also use the machine in larger pieces...that blew my head. That's it...I'll go with Muse.
Thanks for your time and have a great weekend. 👍🏻
Happy to help you make up your mind. Feel free to use my FSL coupon code to save yourself a bit of money
thanks for you video explaining why you picked the muse 3D printer. I was thinking of getting one but after I watched you video am glad's I didn't. I have a small business and can't afford a lot of money.
Hopefully I didn't jade you. While I love my Muse 3D for what I do, there are many great lasers out there (including the Glowforge). The point is that you really need to do your homework to ensure that whatever subtleties a laser provides, they will either be exactly what you need or they might be things you should avoid.
Honestly neither the Glowforge or the Muse 3D are your cheapest solutions, but the Muse 3D has been pretty solid for me and is more industrial than a Glowforge (though that comes with a slightly steeper learning curve). If your use case is mostly engraving you can save a ton of money with a diode laser like an XTool D1, which will do a great job engraving on most materials and will save you $1000's over most CO2 lasers. But as soon as you want to cut something , most diode lasers will limp along at best and will drive you crazy.
You made great points about the Muse vs Glowforge. However, you could buy at least 8 of the K40's with lightburn and water chillers for the cost of this one Muse 3D. Both GF and Muse 3D look great, but I speculate that if I handed you a product made from a $600 K40 and told you it was from a Muse 3D, you wouldn't be able to tell the difference.
Well, I certainly can't argue with prices. At the end of the day, a 35-40W doesn't differ much in capability from one vendor to the next. Having used a K40 in the past though I can assure you that there is more tinkering involved in a K40 vs either of these big market players. That isn't necessarily a good thing though so for some people :-)
As I've always said, buy the equipment that meets your needs. There are many viewers of this channel who own one of more of these lasers and are quite happy and I'm not about to get into any sort of religious war about whose laser is best. My interest is in helping makers.
I bought a MUSE also. At first the FSL people were OK and helped in fixing a couple problems, but that was one of the first models. More recently, they have been GREAT on customer service and replacement parts with quick response. Also looked at Glowforge, but simply no support. THAT IS KEY when you get a laser. Love their simple software in the latest RE software which software is KEY too. Overall for the price, love the MUSe and we used the crap out of it. For the price it clearly is the best solution for beginners.
I like the Muse and my experience with support has been similar.
Thank you!! Your camplaints about Glowforge are the same ones I have about Cricut. So, I'm familiar with those issues. In particular, I know about being handcuffed to a company's services in order to use my machine.
Given everything in this review, I just placed the Muse 3D with Rotary Riser option in my FS shopping cart :)
Yes lock-in is worrisome, though the GF, which is a fine laser otherwise, isn't quite the same as a Cricut. Cricut would like to you use their image service and materials, but you aren't forced in the same way. I have a Cricut and don't use their service or materials. With a GF your laser is effectively dead without being connected to their service and that's just objectionable.
We've been looking at glowforge for quite some time now but I got to thinking, wonder what else is out there? I appreciate this video. I've only known about a muse 3d for less than a day.....this video will make me slow down a bit and do some more research before purchasing anything
You are wise to carefully consider your options before spending a huge amount of money. Note that I also just uploaded this video (ruclips.net/video/VIGKy_ywAsg/видео.html) designed for the first time buyer.
What you buy very much depends on what you want to use a laser for. If it's just for home/hobby work then make no mistake that the Glowforge is a fine option - subject to some of the issues I surfaced in this video, which may not be an impact for you.
Glowforge sounds like the Cricut of laser machines
This made me laugh. 😀
😂 I was thinking the Dremel 3D20 for 3D printers
Wow that was a great review Ive been looking at lasers for leather work and I did not like the idea of cloud based connectivity! And the Muse looks like the one for me!
Glad I could help! Yes the Muse can run completely standalone. The only reason to be connected to the Internet at all is for software updates.
BTW, leather smells bad when engraving so no matter what laser you pick, be prepared to upgrade the exhaust.
Yeah, #1 is correct. Having to use their cloud service is a deal breaker. That's the reason I didn't buy a digital photo frame either, I can't stand that way of doing business.
Wow! This very informative video has made me pause and rethink about the type of laser to buy. I know absolutely nothing about laser cutters and wish there was a hands-on class I could take to learn more about lasers the different types, about parts, materials, what is safe to engrave or cut on a specific laser, ventilation cooling, and so on. I mainly want to cut acrylic pieces for my cake business and not have to outsource work I could probably do myself with the proper education/ instruction. I really liked this video but wished there were more inserted video clips or photos when the host spoke about certain items and showed the differences side by side and the products in operation. Otherwise the information given was great talking points. Especially think about how as you grow does your laser grow with you, connectivity and being locked into a company's setup. So in the meantime I will continue to educate myself on lasers and save money to hopefully purchase my own by 2024. Than you!
Thanks for the feedback. Of course the goal of this channel is to help you learn, so if you need details on something just ask and I’m happy to put a video together
Thanks for a good video. I agree with all your points, #1 being the best reason not to go with Glo Forge. That is a deal killer for me. I am just doing research looking in to these. It may be a future purchase at the end of the year or maybe next year. More so as a hobby with a tiny part time income.
Note that these issues aside the Glowforge is a fine beginner machine.
Very informative. Glad I now have more info on both lasers. Going to watch your other video now. Thanks for posting this video.they
Happy to help, though these are just two of dozens of lasers you might want to consider
Thinking about getting a good laser to make money here in my retirement.
That's one of the best reviews I've ever seen on RUclips thank you.
And for every reason you stated especially the connectivity glowforge is definitely out. I hate that business model, yeah you bought the machine now you're renting the ability to use it? No thank you.
Wow thanks! ☺. I'm very happy that you found this useful.
Hi Steve .you have opened my eyes ,definitely not happy with vendors who milk us for the last penny
You and me both!
Steve brings up a great point on vendor locking. This came up with cricut and their customer base responded loudly and then cricut completely backpedalled within a week after the two responses they put out. I am thinking about getting a glow forge but what happened after with cricut and both companies have similar business models and both have their design software online. I’m a bit weary to go with glow forge now and just holding out to see how it plays out. Going to do more research with muse 3D too.
As far as I know Glowforge is the only laser company that does this internet lock-in.
Exactly why I decided not to purchase a Glow Forge
Wish I could say I'm a fan. Bought a Muse Titan clearly no QA process at Full Spectrum prior to shipping....gantry was even missing several screws and customer service after the sale....good luck! Such a shame for the price they charge right now it's a very expensive and very large paper weight.
Sorry to hear about the issues. While I'm not attached to FSL support, or FSL in general, I can tell you that they do lurk in the channel, so hopefully they can reach out to you. From my own perspective, I have now used FSL support twice and in both cases they got back to me in the same day.
Shoot me an email and I'll see if I can help you or work with you to get a tighter connection to FSL support.
Sadly, now 2 Titans since November.......the current Titan has issues with the camera, exhaust fan and air assist not working from the Titan. Zero customer service or technical support. In fact they never really reply to my now 3 support tickets only get a we will get back to you.....again since November. Total shame!
@@jamesp2791 Definitely sounds like a bad experience. Fortunately there are lots of laser companies out there and one will surely meet your needs.
Some of the FSL folks frequent the channel, so hopefully they will hear you.
Thank you! I've been considering a glowforge and now that I am ready to purchase you have moved me more in the direction of the Muse. How is the muse community? Glowforge has so many platforms to talk with other owners.
Community is where Glowforge has done a stellar job. The FSL community for the Muse is a lot less organized. The good news is that CO2 lasers are all fundamentally the same so there isn’t anything a Glowforge laser can do that you can’t do with other laser. I regularly head of the GF community to see what projects people are doing and it’s generally trivial to reproduce those on any other laser.
The opposite isn’t true since there is no rotary tool or other accessories and no easy way to engrave on anything thick than 1 1/2”. The Glowforge however works very well for its intended market but I would have out grown it very quickly.
FSL appears to consider the Muse as an entry level business laser rather than a home appliance so the markets are different and added capability goes along with that.
Thank you very much Steve excellent thorough concise organized video.
I'm looking for a laser and glow Forge was eliminated early on because of your video, having to be connected to their website to work your machine? No thank you.
Once the GF is eliminated there are many fine lasers to choose from. In addition to the Muse, look at the Thunder lasers, as well as Boss laser. They are bigger but if you are starting a small business you’re going to quickly want some of their features
nice review. really need to own both to give a comparison review though.
You can do what I did and befriend an owner of either and get them to let you play a bit.
Great comparative analysis. Connectivity in itself is good - it's the privacy issues that come with it are the show stoppers. And enforcing persistent connection is even worse .
It was the privacy issue that killed it for me too. If Glowforge ever changes that I'd probably buy one because the laser is otherwise pretty solid (but doesn't have a rotary attachment).
I’m so glad I actually saw this I almost bought a Glowforge
I don’t want to knock the Glowforge since for some users it’s exactly the right option but it does have some drawbacks to I just couldn’t overlook
Wow. Thank you. I’m canceling my order TODAY! Thank you for this video! 💜
If you want a turnkey system a Glowforge is fine. But if you want expandability for things like rotary attachments then a Muse might be a better choice
You almost had me convinced to buy the muse 3D. At least until you mentioned that you have to pair it with an online account no way not in a million years! If my Internet goes out I still want to be able to work with the machine having that scheme is the most harebrained thing I've ever heard in my life forget it
Wait, the Muse doesn’t require you to be connected at all. It’s the Glowforge that requires a network connection to run
Thank you!! All the information what I need to hear.
You are so welcome!
Steve, Thank you so much for making this video!!!! Muse looks like a great option. I had not heard of it before your video and you mentioned some excellent points where it beats Glowforge.
There are lots of options and the Muse is just one so look around
Definitely something to look into now, the muse 3D, thanks!
If this is what you are considering and want additional help just shoot me an email or Instagram message
What model Muse 3D do you have? Thank you and great info
Mine is a 45W tube
Really helpful, straightforward comparison; much appreciated!
Happy to help 😀
To the point, and not biased. 😌🙏🙏🙏
I try to be fair
Excellent information. Thank you. I'm looking for a good laser cutter to add to my tech tool menagerie.
I will continue to check out more Muse 3D vids as well as competitors. I'll let you know which one.
I do think there are two important considerations. First know what you want to do with a laser. Second know the limitations of the laser you own or want to buy. There are definitely things that neither a Glowforge or Muse can do and they are different from each other as well, if you want turnkey operation but more constrained abilities then a Glowforge is perfect. If you want complete control but are willing to tinker then a Chinese K40 could be perfect. A Muse is somewhere in between
Great video. We had been looking at a Glowforge and didn’t think there was anything else out there except the cheap Chinese lasers. What is the work area of these?
The work area is the same area as a Glowforge at about 12"x20", though it’s possible to engrave on taller things with the Muse because you can drop the bottom of the laser
That was a very thorough review, and confirms many of my first impressions. I am interested in a laser cutter to cut cork fabric, enviroleather (faux), ultrasuede fabric, and leather for bagmaking. Obviously I considered glowforge, but I cannot get beyond needing to connect to the internet to be able to use the machine. Happy am I to have heard the name "Muse" at a virtual bagmakers' retreat last week. I am also considering a makeblock laserbox. Did you consider that one at all?
My biggest concern is that I don't have anyone to help me, and I neither mechanically nor technically oriented. I was happy to see the control panel because I do computerized machine embroidery, and my machines have cameras, scanners, and projectors in them, as well as beautiful display screens; and the concept seems comfortable for me. But, having to replace a fan right off the bat makes me nervous. You aren't near PA, are you? Or, do you know of anyone who could help with the install, or some basic training? Everything is aiming in the direction of the machine you chose, but I don't want to a major investment and not be able to use the machine...
Thank you for an excellent summary.
I didn't consider the Makeblock LaserBox, but as long as it has the features you need you will be OK. It does look very similar to the Muse and without any solid information I'm wondering if they have licensed the technology from Full Spectrum Laser. Dremel did this for their laser and FSL seems to have a history for licensing to other companies.
One of the most important aspects of a laser though is power and both the Muse 3D and the Glowforge offer a 45W option, but I don't see this for the LaserBox. Regardless though it should easily cut cork fabric or most other fabrics if that's your goal. I will do a video to walk through some of the many materials a CO2 laser can cut or engrave and I'll try to cover cork fabric as well.
Regarding setup, don't be intimidated. Most lasers are very easy to get out of the box and running in less than an hour. There are many videos (including mine) on setting up specific lasers.
Regarding my fan, it wasn't a serious issue. These are the same small square fans that are in most equipment. FSL quickly replaced mine on warranty and I swapped out the bad one in 10 minutes with one I had sitting in my parts bin even before I received the replacement. They've gone to great lengths to make the laser serviceable without ever having to box it back up and send it back to them. They even provide the tools you need to work on almost anything in the laser.
Serviceability was a question I specifically asked Glowforge when I was speaking to them and there seemed to be few self-repair options. They were clear that shipping a laser back to them for service was a common solution to many problems.
For the most part, this kind of equipment is very reliable, though with lasers you can expect to have to change the laser tube after a couple years of heavy use. I did have a look at what replacing the tube in the Muse 3D would involve and it looks pretty straightforward even for someone who isn't a mechanical engineer and anecdotally, they will sit on a video call with you to walk through any service you might have to perform :-)
Hope this helps.
Could I send you some samples of cork fabric and enviroleather for you to try?
@@TALISHAMON You could but don't bother, since I want to order some for a project I'm planning to do anyway. The cork will be fine so I wouldn't be concerned. The faux leather might be more an issue though - not because a laser will have trouble cutting it, but rather because of what it's made of. You need to check with the manufacturer to make sure that it isn't PVC-based because the "C" stands for Chlorine, which is quite corrosive to your lungs as well as your laser.
I understand these questions given that you are just starting to look into what lasers can do, but rest assured that what you are trying to do will be trivial with any 40 watt CO2 laser. Keep in mind that lasers with this level of power can cut cut through a 1/4" piece of hardwood in a single pass.
@@SteveMakesEverything I received an answer to a question from the company that confused me. Could you please clarify this for me?
"The software is browser based. Meaning you use the internet browser to access our control app. You do NOT need to be on the actual internet to use our machine.
"
What is the control app?
As an example, can you place a picture of a horse in the machine, and scan that picture with the camera, and then put a piece of cork, wood, whatever, in the Muse, and place that scanned image precisely over the material, and cut as a stand alone operation? Or, if you cannot do that, can you send an SVG file from your computer to the Muse, and precisely place that image over your material, to cut or etch, without going to the internet? Do you install the software on your computer, and can you use the software independent of the internet?
Are a certain number of projects stored in memory on the machine, that could be replicated without going to the internet? I thought it was simple, and that the internet is not required to operate.
In reference to the faux leather material, this is what the website states, "EnviroLeather™ is made from a urethane-based TPE, formulated with no flame retardants, no plasticizers, no perfluorochemicals (PFC’s) and no antimicrobial biocides. It passes CAL 01350 for low VOC emissions."
I spoke to the bagmaker today who has a Muse without the autofocus camera. She really likes her machine, and is cutting her cork bag pieces with it. We were talking about a way to cut straps or handles for bags. The bed size is the issue. If you need a cork or leather strap from 2" to 4" in width, and 26" to 50" in length, could you do it if you take the bottom off? Would you have to support the material on a platform of some sort that is the length of the strap and slide that under the unit? And, can you do it on either axis, or are you limited front to back? Can you use a large piece of fabric and cut numerous straps from the entire piece? Is there a way to keep the cut straight as you would move further on the fabric for the length of the strap? Or place reference marks somehow, through the software, to keep the line straight? Cutting straps is necessary and extremely tedious. Am I trying to get the Muse to do something it cannot do? I hope you understand what I am attempting to do, or even attempting to ask.
Thank you for any clarification you can offer.
@@TALISHAMON Well it certainly looks like you're doing your homework and starting to ask all the right questions. :-).
Let me try to answer some of these.
First the network question, since this is a key difference between the Muse and the Glowforge. In many of my videos you've seen me use Retina Engrave 3.0 to layout how and where I want to work with objects on my laser. This is the control app FSL is referring to, and is actually hosted inside your laser. When you install your laser you can connect in one of two ways:
1) You can connect to your home wireless network and once configured you can open a web browser from any computer on the same network by typing "fsl.local" in your browser. At this point you will see the RE3 software running and can layout out your project and even start a laser job no matter where your computer is relative to your laser. (Don't leave your laser unattended while it's operating though)
2). If you want to dedicate a computer to the laser work then you can plug an ethernet cable directly between your computer and the laser. Then use the web browser in the same way. Note that if you have a wired network in your house rather than wireless you can also just plug your laser into your network router and it would operate exactly the same way as if it was connected wirelessly.
In either case you would use your browser to work this laser via the RE3 control app.
Next, any project you upload to the laser will automatically be stored in the laser and you can rerun any job that you've previously performed. These will stay in the laser until you either perform a factory reset on the laser (which you wouldn't normally ever do) or the jobs get automatically removed to make space for newer jobs (which I haven't seen happen so I'm not sure how much memory space the laser has for this purpose). For any project you want to preserve for the long term, you can also export it to a file on your computer and reload it at any point in the future. And the final option is to upload it to the cloud space that FSL provides, which is akin to how Glowforge handles your projects - though GF offers nothing else other than this.
fluorine
Regarding the camera, if all you are ever going to work with is "flat" materials like cork or leather then strictly speaking you wouldn't need the camera for normal work, since for these materials you could do a quick manual focus and start working; however, what you would lose is the ability to scan the workspace and any layout you do would have to be done with a perimeter scan of your project on the laser bed and then moving your material into place manually so avoid wasting material. My advice would be to spend the extra money for the Muse 3D rather than the basic Muse. It's quite a bit more money but you would quickly eat the cost difference with the less frustrating experience you would have without the camera.
If you want to cut items that are longer than the laser bed there are a couple of options. First you can in fact remove the bottom of the laser (which is unique for FSL lasers.) However if this is what you want to do you would have to buy a longer focal length lens ($150 option from FSL, but is again something that is unique to FSL lasers). With this setup you could cut the first 24" of a long strap and then slide the material over, realign the project (with the camera that you'll definitely need for this) and then slide the material over cut the next portion. I'd suggest making a quick jig with a square edge you can push your material up against while cutting, so that when you slide it over, the cuts stay aligned with each other.
Note, to save some money on the extra lens, it might be possible to create a jig that is the width of the laser workspace with a material roller on both side and a square edge in between. Then you could roll the material off of one side, cut it and roll it onto the other side. This would allow you cut things of pretty much infinite length. Hmm this seems like it would be a good project for a video. :-)
Finally your scanner question. Yes, you can draw out an object on paper, scan it with the laser and then use it as a pattern to engrave or cut into material. I'll definitely do a quick video to show this for you.
These are great questions! This is exactly why I wanted to create this channel - thanks for inspiring me.
My main issue with the Glowforge is the online-only software. I live in a rural area, and have internet blackouts. I do NOT want to be constrained to using the internet and a company's servers to use a machine that can EASILY be used offline if they wanted to make it work. You NEVER know when a company will go bankrupt, and relying on their online-only software is a huge issue to me.
Disclosure: I don't have a laser ATM, but am looking to get one for cutting thin MDF and Plywood
These are the points I was making too. The GF hardware is great but the lock-in is not. Not everyone has a fiber line running into their house for Internet service and not everyone wants to upload proprietary designs into a cloud service which may or may not be secure
Thank You Steve for sharing this information 👍
Very welcome
Really Really helpful, Im choosing right now. This video was really helpful. Many thanks.
Happy to help. If you have any specific questions you can post them here and I or someone else in the community can answer.
Yeah I was pretty sold on the GF. Thanks for this info I'll look into the Muse 👍
Hopefully I've been helpful 😀. There are many great home/small business lasers though so do a bit of research and buy the one that's right for you.
Hi Steve. Thanks for all of your great videos. quick question...I bought the muse core laser. Did not purchase the cool box. I did buy a Vevor water chiller instead. it came with a small device for the alarm outlet (no hose, cable, etc...). The muse shows a four prong outlet where the muse coolbox should connect to the laser. So my question is...Is there a cable, tube, etc...that needs to connect to the chiller? Im afraid to turn anything on ruining the laser. I just got it a few days ago. Thanks
The things you would need to measure are flow of the coolant and the should be required by the Muse anyway. The temperature of the coolant should be controlled by the chiller automatically and ideally provide an over temperature alarm. Set the chiller to 18C or so and an alarm at 22C and you will be fine.
@@SteveMakesEverything FANTASTIC. so then the only things to connect the muse to chiller
are the input and out put tubes
@@treebarh5192 As noted there is a flow sensor in the system somewhere. Not sure if it is in the CoolBox or built into the laser though - I suspect it is the former, so you might need to deal with that too
can you use glow forge project files with the Muse?
Unfortunately the Glowforge is a bit closed, so you certainly won't be able to log into a GF account and pull a drawing; however, SVG drawing files are universal so create those and the Muse or almost any laser will be able to use them
Can either of these machines allow you to use USB to print your files from? Thank you Steve...great video :)
there is a usb port on the Muse 3d that allows you to run jobs from a usb drive. The Glowforge requires you to upload your designs to a cloud account.
Thank you!
Is there any guidance on replacement parts that these (it) will potentially need? Can one replace them or do they need « serviced » ?
Sorry, I think I answered only half of your question. As a rule the only thing you can reliably predict replacing is the actual laser tube. Most other parts would only need to be replaced as a result of an unpredictable failure. For example the main exhaust fan on my Muse 3D failed but FSL sent me a replacement very quickly. However it is a standard 120mm fan so I actually replaced it myself even before I received their replacement. All I had to do was remove the cover over the tube so I could get at the connector, and the 4 screws holding the actual fan. FSL does seem to want you to be able to service your own laser if you need to. I can't ever see having to return it for service of anything even during the warranty period - this is a big deviation from the Glowforge BTW.
Pretty much everything inside the box is available off the shelf from other places. This included things like fans, pumps, motor, belts etc. I believe even the laser tube itself is just a common part. The sole exceptions appear to be the main controller board and possibly the power supply
Wow! Thank you SO MUCH for the information!!
Glad it was helpful!
Sadly, I bought a Glowforge about 2 years ago. Every time I use it it irratates me having to connect to the internet to run a simple print. Often times it takes Glowforges servers longer to process the job than what it does to run it. Additionally, Glowforge was not transparent about the internet being required to run jobs. Not to mention there customer service is horendous. If my Glowforge ever needs major repairs, it's going in the trash. Parts are expensive and often times out of stock.
Well every laser has drawbacks. The thought of ever having to send my laser back for service would worry me but from a quality/reliability perspective the Glowforge seem pretty solid. The internet requirement should be a huge concern for everyone though. If yours is going to get trashed you can send it to me and I’d fix it to donate to a school 😀
@@SteveMakesEverything just my 3¢ ....BUT also the thought that your machine being dependent on the company for it to run . That should they decide to just stop supporting the software on older models. Including for it to run , have access to saved design files etc. But they can directly force the consumers to continuously but newer updated models anytime they might choose to say they will no longer be supporting older models .
So that also makes the machine have no resale value because they just won't work alone themselves . It makes all those older models non functional so people that are content with useing them or bought them second hand or just the mind set " If it's still working for what I need " then never a reason to but the newest model . Lastly all those machines being non-functional they will just end up in a land fill . Rather then people being able to use them for years and years !! The Cricket machine just did that last year I think . And of course Apple has done it .. I have a first gen iPad that had continued to work fine but app creators stop supporting apps or don't make apps that can be used on older models etc. So now I have a perfectly functioning iPad that is little more then search tool and video player for now because I can still connect to the internet and use it .. but more and more webpages won't come up because they are not supported . Not sure how long but it most likely soon just be a paperweight.. that's aggravating because it has nothing wrong with it and worked for what I wanted it to do.
And more company's are going that route. And it's just to keep people buying ... And of course there are customers who will always be wanting the next newest model etc.
But for myself I didn't have a need it reason to buy something new when I have something that works perfectly for me . And though they think it will get me to buy something new and they want me to do that , it does not work like that for me ..they ended up loosing a customer. !!
Because all that shows me is that is something they will continue to do in the future and I will always be put into the situation of being forced to keep buying the new models even though I should not have to.
In reality I wouldn't still buy new generally ..new to me ..but a used older model but newer then mine that has a much cheeper price point then the newest one, us the way I would have gone anyway . Just cheap what can I say ?!! But for me it also comes down to peoples ability to buy and sell used abd second hand items that gives them a longer useable life and keeps them from just going into a landfill somewhere .. to me saving me some cash and keeping stuff out of a landfill gives me a better feeling then what I might get from always getting the new coolest model with a new Higer pricetag ever will.
@@DOCDOCFLAMINGOS Agreed - this is kind of a shifty way to capture your audience. I have many Apple devices and it does bother me that they regularly leave users behind unless they forcibly buy new hardware. I think if Glowforge ever comes out with an improved model they may do the same. Cricut does this as well though the cost of their machines isn't so high that it is prohibitive to upgrade al older machine.
@@SteveMakesEverything All very valid points and I agree 100%. And honestly I fully beleive that is exactly what Glowforge will do. Because the intention is already there in that it's customers are completely dependent on need the internet and their website for any device to even work and remain functional.
And as you mentioned yes Cricket is cheeper to upgrade their craft machines, But none of their customers or anyone in general had any clue that at some point their older machines would not be supported any longer and the customers would just have a none functioning or usable device.
So it was a shock I'm sure!! But that did make everyone aware that this could and will happen at any point in the future . And that any company that sets themselves up the same way , the machines dependent on the company for them to function at all, then they can and will do that exact thing at some point.
If I'm wrong I will totally eat my words and say I was wrong, but I don't think I'll have to do that.
And so much of what company's sell us today are totally doing the same kind of things , just not as up front of in your face. Like cell phones many of them will just stop doing any updates or security patches etc. on them just after a year or two. So if your cell is working fine and no need to replace it , but it's no longer going to be updated and security could become an issue. Well we either deal with it or we deal with buying a new cell phone!!
There is a quote I have heard that goes something along the lines of "You will Own nothing , and you will be happy!". In that sure we can spend money on something physical that we own. More abd more things are dependent on the company supporting it and the amount of time they will do so is beyond our control and then we don't really own anything at all !!!
@@DOCDOCFLAMINGOS This is a great quote 🤣
Hello Steve, Thanks for posting this video. I was about to pull the trigger on a glowforge but after watching I'm leaning towards a Muse 3d or Thunder Laser (This one is very attractive to me because I like being able to use Lightburn to control the laser, I wish the Muse would allow this too). Do you have a link incase I decide on the muse so you can get credit for the sale? Thanks for all you do!
Well if the software is important then I too would lean toward the Thunder Laser. If you do go with a Muse you can find my coupon code in the description
@@SteveMakesEverything Thank You! I do love lightburn, but if you think the muse software is as good or close to lightburn I could live with that choice! I've learned lightburn, and I'm not against learning new software. I have reached out to Muse and was offered a free upgrade to the 45W laser. I am coming from a Ortur Laser Master 2 so either way it is a upgrade. I'm just being cautious because Im about to spend 9k to 10k and I only get one shot at this. My plan is to start a business and hopefully make this a full time thing eventually. I do appreciate your input and will be sure to use your code if I decide on the Muse. Thanks for taking your time and replying!!!
@@coreymaxim4198 The Muse is more of a high-end beginner laser. It's got some industrial strength, but honestly if you already know what Lightburn is, then you are probably already beyond the benefits of a Muse and Retina Engrave 3.
The Muse 45W option is really just putting a 45W tube into a 40W laser. While you likely won't see any more power, the tube should last a bit longer.
Excellent Steve. Thanks for sharing. I am trying to see the difference between the 3D and the Core models. Main reason I see is the movement of the head in relation to material. My plan is to use only flat stock for cutting & engraving, so I am not sure the roughly 50% price increase is worthwhile. Am I missing something important?
Welcome to the channel. I toiled over this decision too, but it really boils down to your price limits. The Muse 3D does offer continuous focus which is great for non-flat items you might want to laser, but it will also work for materials that are supposed to be flat but really aren't. 1/8" plywood is great to work with but is often bowed and the camera could help ensure a good print. I initially thought the camera was a gimmick, but I have grown to rely on it even for flat materials. I have no regrets getting the camera but it is definitely possible to live without it.
@@SteveMakesEverything Thanks Steve. This is the first time I have posted anything. Very useful response.
@@myhomeelevator Happy to be helping you make your world
I am considering buying a Laser your videos are very informative. I have subscribed to your site!
Awesome. Welcome to the channel! If there topics that be helpful to you just send a message
Muse it is Thanks very HELPFUL!
As always, do you own research as well. The Muse was perfect for me when I bought it, but everyone has a different use case.
Steve, thanks for the great video! I actually purchased a glowforge and canceled my order with in a couple days of seeing this video coupled with posts I’ve read about a “campfire” smell and some machines arriving damaged. The last thing I want is for my space where I also do some sewing/embroidery to smell like an outdoor fire pit. I wish there was a place you could see, hear, and smell a properly vented machine in person. Do you know of a showroom demonstrating a Muse 3D? Your opinion about smells?
Thanks in advance!!
If you are willing to go to Las Vegas I think FSL will give you a tour and let you play with lasers. That’s the only place you can see one unless you live close to someone who owns one and can give you a demo
@@SteveMakesEverything what is your opinion about smells? I’m aware the laser is technically burning the item to cut and/or engrave, but if properly vented do you still smell it?
@@alisonclark7540 This depends somewhat on the laser design, but you can help with a decent external inline exhaust fan. This works well to avoid any smoke smell on my Muse 3D.
My SP-3624 Laser was design to have decent exhaust and that one emits no smell at all because the cabinet has fairly negative pressure
Hello. I was looking into a Glowforge but after this I'm not sure lol. Do you have a link for the MUSE 3D?
You can buy a Muse 3D laser direct from Full Spectrum Laser at fslaser.com/fsl-muse-3d-autofocus-desktop-co2-laser-cutter-bundle/. If you do decide to buy one you can save yourself a bit of money using my coupon code "SteveMakesEverything"
As I consider the purchase I found you video very informative - Thank you
Awesome, happy to help make a decision and welcome to the world of lasers!
Good details. I want to engrave photos on glass, metal,etc. How does Muse do that?
No matter whose CO2 laser you use you will be able to engrave on glass and metal (with a Cermark coating). Be aware though that you won't get a lot of greyscale shading on those surfaces. You'll need to work at it a bit to try to get it right.
Excellent info, thank you!
Glad it was helpful!
The lack of support for Lightburn is a problem for me.
I won’t argue with you. Lightburn support is something I’ve suggested to FSL many times. Other companies like xTool can support both Lightburn and their own software, so clearly FSL is making a business decision here, though I would argue this is impacting their sales
Thank you! Very well presented and easy to follow
Appreciated and welcome to the channel
Hi Steve is AP Laser can be a comparable machine. I know it is pricier but do you think it is also worthy money wise. They are good company north American manufacturer and heard from user about their reliable customer service. Like to hear from you if your time permit. I currently own an Ortur and looking for a business option.Thanks in advance.
Well if you are looking for a business option, then AP Laser is in your wheelhouse because even their starter lasers are aimed at small businesses.
Once you are in that market there are lots of excellent choices, and since the market overall is highly competitive, you generally get what you pay for. You might also want to look at others in this part of the market - Thunder, Boss, Aeon at the lower end and companies like Troec or Epilog at the top.
How does the cooling system work with the muse?
They have a separate box containing the cooling and air blower. It plugs into the laser with a cable and three hoses. if you want replace either of these function with a different unit, it can be easily done.
Can you use Lightburn software on the Muse?
You cannot, which just makes me sad. I've poked at FSL a couple of times to enable this but they don't seem to be listening, even though LightBurn is so much better.
thanks for the info. I almost purchased a Glowforge...
Glad I could help, and welcome to the channel
Keep in mind that Glowforge in the right hands is a great tool as well - it just a little less industrial than a Muse.
Thanks verry must
Greats from Holland
Glad it helped
Do you have the direct link to purchase the muse machine?
Just go to FSLaser.com - there's no special link. If you use my coupon code, you can enter it as you're ordering.
Hello Steve, would be possible to use K40 Whisperer software with diode lasers cutters? thanks for your videos, very useful.
I doubt that you'd be able to do that. Keep in mind that there is a free solution for diode lasers (LaserGRBL) as well as Lightburn.
@@SteveMakesEverything thanks
Hey there im looking into buying a laser cutter and engraver what would be a good beginner friendly laser i can buy?
That’s a very broad question. There aren’t really huge difference between most hobby lasers. If you want a laser that is hands down the easiest to use then get a Glowforge.
Realize of course that the limitations that make the Glowforge easy will persist forever so if you want to grow beyond the basics then look at a Muse 3D or even a MakeBlock Laserbox. If you really want to live on the edge then get a Chinese K40, but you’ll get a much steeper learning curve and likely have to deal with some early growing pains,but you’ll get loads of capability
What teleprompter do you use ?
I was just using an app on my iPad however I wouldn’t recommend it or teleprompters in general. I used this for only a few videos before abandoning the idea. I realized that it was taking 2-3 times as long to create a video. Just get used to collecting your thoughts an presenting in a more natural format and your videos will be better
Hello Steve!!!!!!!
Is the Muse really that good since it is old technology?
The EPILOG brand of lasers has similar sizes and are not water-cooled.
Is there a plus to having water-cooled capability?
So a couple things to keep mind: I wouldn't say the Muse, Glowforge or anything else is old technology. Epilog lasers are the standard for sure but you are going to pay a lot more for them; however, don't assume they aren't liquid cooled. Like the Glowforge, any cooling is internal. There's still some form of liquid coolant running through the laser tube, but it is cooled internally. This is convenient because there's nothing to hook up externally, but that just means that anything needed to cool the laser is built into the box, meaning you have to live with whatever they provide, and the box will need to be bigger to contain it all. By contrast with a Muse or any other laser with external cooling you can put an actual chiller in place for better cooling. The downside of course in a satellite box for the pump and air compressor. One isn't necessarily better than the other - it's about what works best for you. You aren't going to put an Epilog on a table or even on the floor in a small apartment, but I'd have one for sure in the right situation ;-)
@@SteveMakesEverything THANK YOU SIR!!!!!!!
@@daniellane1757 Happy to help.
Thank you very much for this Info !
Glad it was helpful!
Great video ty very much
Glad it was helpful!
is this compatible with samsung chromebook?
I would have to say yes wince all that is required to operate the lasers is a web browser.
Do you need the water chiller?, does that mean if you do not buy a chiller you do not get an air asset nor chiller? there is no built in water idea? Thats a pretty expensive option to buy from them..I'm a little confused, it seemed reasonably priced but them cannot ell if i need their chiller Assist box...
For a Muse 3D you don't need a chiller. The laser comes with a thing FSL calls the "Coolbox" which is a separate box that contains a water pump and fan-cooled radiator and an air pump used to blow air on the work that the laser is cutting to help keep it clear of smoke and free of fire.
Other lasers from FSL and other manufacturers may require a chiller though
Thank you Mr. Steve
Happy to help where I can
Hi Steve. I checked with Muse, and they can’t cut my project which is too deep. What do you suggest? Thanks!
You don’t say what the thickness or type of material is but in general you can try to do multiple passes for the cut. On a 40-45watt laser you are practically limited to about a 1/4” (6mm) in wood or acrylic. If your material is thicker than that you’d have to look at a laser with more power (and usually a bigger price tag). FSL has a number of higher power PS models, but also check out Boss Laser, Trotec or Epilog. There are 60-90watt lasers for “reasonable” prices
Do you have a referral code? Also, what’s the website to actually order?
You can order laser from FSL’s web site directly. My coupon code is “SteveMakesEverything” which will save you some money.
Would this platform be a good choice for engraving on bullet casings/shells? If not could you point me to the right direction? Thanks!!
I engrave on metal a CO2 laser would require a coating like Cermark to engrave on. It’s possible but a fibre laser might be your better choice since on of sufficient power should be able to engrave directly
@@SteveMakesEverything thanks for your time and input! Yeah, im looking at making 200 to 300 of these on a Bullet casing for some veterans groups and know i need a consistent way to get them done. Thanks again for your time!!
can you run the muse 3d with lightburn
So many people have asked this and I have badgered FSL a bit to just support Lightburn, but so far no progress.
thanks @@SteveMakesEverything
Thank you so much for sharing this video ....amazing
Welcome to the channel and you are more than welcome for the kind words. Hopefully this helps make your decision easier if you are buying a laser. If there are specific things you'd like to see let me know.
Does the muse 3d have pass through?
The pass through features appears with the Riser option
@@SteveMakesEverything thank you
Very informative. Thank you.
Thanks and welcome to the channel.
Thanks for the info!
Thanks. Happy to help
Did you consider the Snapmaker 2.0? If so, what were your reasons for passing this option? Also, do you have any solid recommendations for an entry point that is a bit more cost effective? $6000+ is a bit out of budget. I was looking at the FSL Muse Core Desktop CO2 Laser Cutter, but I'm not sure if it can be upgraded with the 3d lenses/cameras at a later time.
I didn't looks at the SnapMaker, though this is is a good question for many viewers to have answered. The SnapMaker is a diode laser, which is fantastic for engraving most woods and some metals and acrylic that isn't clear. Combine this with the CNC router and the (all three of my workshop passions) and you have a pretty decent entry level machine.
By contrast lasers like the Muse 3d, Glowforge, or Chinese K40 lasers are all CO2 lasers, which means they will be much better at cutting as well as engraving. It doesn't mean they are better for everyone because as you note, the budget can be seriously impacted by a CO2 laser, and CO2 lasers certainly won't fit on your desk.
While I'd love to do a hardware review of the SnapMaker, I will at least over the coming weeks/months do a real comparison between CO2 and diode laser capabilities - not to quickly conclude that you should buy one over the other, but rather the strengths and weaknesses of both so you can make intelligent choices that are right for you. Both laser have their place.
I thought that the Snapmaker 2.0 is a 3D Printer, not a laser engraver.
Thank you for the sound advice 👍🏻
Thanks. Hopefully this helps in your quest 😀
Great review and honest recommendation.
Thanks, and welcome to the channel
Extremely helpful, thank you very much!
Thanks and welcome to the channel
I bought on Muse laser. Wish I hadn't, try getting their technical people to call you when you have a problem and need parts. Best of luck.
Sorry to hear about your issue, but I just didn’t experience the same issue. They were incredibly prompt when I needed assistance
@@SteveMakesEverything I'm guessing ron wolffen is either a Glowforge employee or fanboy.
Sorry don't like glowforge now I don't like fullspectrum Laser's either
@@ronbutler2322 Well I'm not interested in promoting the religion of lasers :-). Glowforge people are welcome here too
I'm not trying to start an argument I just like help with what's wrong with my laser I spend $6,000 on this thing and got to use it 10 times now got a $6,000 paperweight
I'm really wanting a laser cutter/engraver. How do you like your Muse 3D after having it for a few months now???
Hi Roger, I love my Muse for myself, but take a look at the landscape and get what will meet your own specific needs. There are many factors to consider - price, speed, power cutting area, camera, etc.
If you are looking at a Muse what you get is a solid metal cased "prosumer" laser that is more open so if you need to repair it you can find almost all parts available off-the-shelf, which means it's usually cheaper than going back to the manufacturer.
If you opt for something like a Glowforge you get a solid entry-level laser with a big community and a more secure closed/safe environment.
If you want to live a little closer to the edge and get a K40 Chinese laser then you get the maximum flexibility but the weakest level of support and arguably quality of parts.
Keep in mind that the real differences in the hardware aren't all that great for most 40-45W CO2 lasers. Where things differ the most are the software operation and support.
The number one reason is extremely valid. I don't know why anyone would be so stupid to buy such a product that relies on internet connectivity, it males no sense.
Yes it's too bad because the GLowForge is otherwise a pretty awesome laser, yet they make their users suffer (often unknowingly)
Great review Steve. I do not have a laser yet and have been tempted to get a Glowforge. However, the connectivity (internet Requirement) has turned me away as well. I too see that there are many happy Glowforge owners and appears to be a nice machine but I will be going with a different manufacturer and am narrowing in on a MUSE.
In the next couple of days I'm going to put out a rather long video with my 60 day review of the Muse. It's a good machine but like all others it has it's strengths and weaknesses - nothing terrible though. Feel free to use my coupon code to save $125 if you buy one
What do you recommend for me? I have a Cricut Maker cutting machine which I like and use to make dollhouse miniatures. I like it bc it's easy to use but I dislike it bc it doesn't cut small enough. I want to make miniatures as small as 1:144 scale. I cut paper and wood less than 2mm thick so I don't need deep cutting depth. I also typically use SVG files that are 12x12 at the largest but typically smaller. I am also not great with technology so I need something that's use friendly and works with SVG files. I have no problem paying you a fee to help me out and give me this information bc I don't feel entitled to your time. Thank you!
I really don't like making recommendations because if I'm wrong you'll hate me. :-) My guidance would be to stick with either a Muse or a Glowforge - both will do with you want from a user perspective and both will work with SVGs or SVG's converted to PDFs (which tend to work better). Both lasers have their particular strengths and weaknesses but both are great for home craft use
@@SteveMakesEverything Thank you! I'll look into both brands some more.
@Harriet Spencer Note that there are other brands as well. Not to inundate you but there’s also MakeBlock LaserBox, the Dremel Laser (now no longer available), Boss, Rabbit, Trotec, Epilog and many others. I’m happy to help with specific questions but only you will be able to make this choice for your needs. Most lasers for your target market will be reliable and provide the features you need. What you buy will mostly depend on things like budget and size.
I’m working on a 60 day honest review of the FSL Muse 3D which should be out in the next few days. It will give you visibility into some of the things I like and dislike about my laser.
Appreciate this video thank you
Thanks. Appreciate the feedback
Where can I view a promo video for FSL Muse or PS20?
You should be able to find this sort of thing on their web site - Fslaser.com. They also have a RUclips channel
Thank You for sharing..
Welcome to the channel
You don't like Glowforge being marketed as 3d, but you're okay with Muse not only doing the same thing but also literally putting it in the name? Since cutting, engraving, and scoring are done at different depths it actually is 3d, so it isn't deceptive anyway.
It's a fair question; however, the 3D in the Muse 3D refers to its 3D focus camera rather than anything the laser does.
I wouldn't call the scoring, engraving and cutting processes of a laser "3D", since the material is flat when your start a job and basically flat when you're finished.
The only 3D subtractive manufacturing process I could think of is something like a 6-axis CNC where a part with a significant length/width/height can be created from a block of material
Where can you get the Mus3 3D and use the discount code?
Got to Full Spectrum Lasers web site if you are interested in their lasers. My discount code is "SteveMakesEverything" and is in the description of all my videos. When you are buying an FSL laser you can enter this code in the Coupon field when checking out.
👍great points
Welcome to the channel
It looks like it comes with a camera ?
Yes, both laser come with cameras. The GlowForge opts for an ultra-wide angle center mounted camera and the Muse 3D uses a 3D Intel camera mounted to the laser head.
This didn't sell me on the Muse though. It seems like it is lacking and needing extra items right out the box. If I had a issue with Glowforge taking designs, etc, I'd just sell the thing. The business I need it for needs internet 24/7 anyway.
Hi Angel. A couple of things. Understand that my job isn't to sell you a Muse 3D - that's up to FSL. All I can talk about is why I bought one rather than a Glowforge or anything else. This isn't a slam against the GF or a checkmark for the Muse, but rather its an understanding of what is required vs what laser manufacturers offer. If you love your Glowforge then that's awesome - many people do love them.
Second, regarding extra items out of the box, neither laser really needs anything (unless you consider water an extra) 😉.
Regarding the requirement for internet connectivity, as I acknowledged previously, this won't bother everyone for certain, but that's not the problem. The real problems are that once you "give" your designs to Glowforge they can do anything they want with them without any agreement from you, and more importantly, Glowforge is a small company that is subject to going out of business. If they do, then your files and the cloud they are stored in both go away and your laser is a 100lb brick. You buy convenience with a GF, but convenience can come at a significant cost down the road.
That video made me cut to the chase, until I discovered the Beambox Pro from Flux... Has anyone looked into this laser cutter?
Looks appealing from the specs (bigger bed, more powerful laser than Muse 3D) and for about bit more than half the price (inc. for add-on like the rotary jig)
But the company is younger and the user community smaller, so not sure about their customer service.
@Steve: your videos are great, keep up with the good work!
Well it certainly looks like a pretty solid laser on paper. Something to understand is that most lasers for home/small business use will use similar, if not the same parts. So from a hardware perspective there will be few differences between any of the lasers >$4K. What matters more is how you interact with them (i.e. the software) and how well the company backs it.
Trying to be as unbiased as possible I'd say the difference of 45W vs 50W is marginal as is the bed size difference. On the plus side it seems like it's got a great price, but what I would be asking them, if I was considering one, is where it was made. It's hard to tell from their site, but I believe FLUX is a Chinese company - not a huge deal from a quality perspective, though they are notorious for over-stating their power outputs. But I would worry about getting parts, service etc. if you need them, and FLUX don't seem to want you to service the laser yourself. The only defence I can put up for FSL is that they document how to do most service in the user manual.
BTW, notice that you can't order one directly from them, but rather you need to use one of their resellers. That could suggest that they care enough about their customers to ensure a local presence, or it could be an alarm signal that they have trouble getting them working right out of the box.
Not trying to neg them, but if you're going to spend several $K on a laser it's fair for you to ask a ton of questions. I pounded Glowforge, FSL and a couple of others with questions before I made my choice.