I make an Industrial Design Style Coat Hanger using Steel Rebar Rod - MIG Welder Project
HTML-код
- Опубликовано: 13 окт 2021
- In this video, I make an Industrial Design style Coat Hanger using Steel Rebar Rod to give it a real rustic industrial decor look. I love the look of industrial furniture and all the decor that comes with it, and this rustic coat hanger has the look I like. It was a good little welding project for me, I did not heat the rebar steel for bending I just used bits of pipe that slid over the rebar to get the leverage for the bend.
The Rebar is a 7mm steel rebar rod
Main tools used, MIG welder, angle grinder, Hammer, MILWAUKEE 10” Locking Pliers.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load. 
Развлечения
![Oscar Maydon x Junior H - Volver Al Futuro [Official Video]](http://i.ytimg.com/vi/sa52xabMSB8/mqdefault.jpg)
Who else wants to see Gavin in that yellow top? Great video thanks as always.
I am sorry but it doesn't fit me. Hahaha
If we built more things that lasted the test of time, maybe our garbage dumps would become obsolete. Well done!
I agree 100%, Thank you very much, I appreciate your comment.
Start a series where you design an interior (doors, handles, windows, shelves, hooks, keychain, stair rails, all things, anything) with industrial style using rebars.
Thank you, that's a good idea, I will have a think about that Bumble Bee, that is a very interesting thought, thank you I appreciate your comment.
As if it’s not hard enough to make a perfectly symmetrical coat hanger out of rebar, Gavin throws a perfect circle in the mix just to show us why he is the King of rebar!!! Another great idea and video from a true craftsman!!
Thank you very much, I appreciate your comment.
Mr. Clark you are the best. Thank you sir
Thank you very much, I appreciate your comment.
Un saludo desde Tulancingo Hidalgo México y mi más grande admiración por el trabajo que usted realiza gracias
Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.
Buen trabajo Maestro 👍👍
Muchas gracias, me alegro que les haya gustado.
Good job, I really appreciate. Go ahead. Greetings from Morocco 🇲🇦
Thank you very much, I am happy that you liked it. Greetings from Australia.
Кевин здравия тебе и твоим близким ,давно не заходил к тебе ,смотрю узел ,крючки для ключей ,дверные ручки ,и вот плечики сделал ,молорик интересно смотреть как всегда на твои труды, молорик,привет с Урала
Большое спасибо, приятно снова вас слышать, я рад, что вам понравилось. Привет из Австралии.
@@GavinClarkdiy Кевин благо дарю, жду новых роликов
@@user-sm1sw7ng1c Спасибо. У меня будет больше, когда у меня будет время. Я ценю ваш комментарий.
I am inspired. Looking forward to following your example(s).
Thank you very much, I am glad you liked it.
Excellent work my friend !! Cheers.
I really like that job. A beautiful design.
Thank you very much, I appreciate your comment.
Mr Rebar, put me down for a dozen...
Beautiful work..I have a leather jacket that would look good hanging on that...
Thank you very much, I appreciate your comment.
@@GavinClarkdiy God Bless and you take care my friend... And keep up the amazing projects.
@@garyjones2582 Thank you very much. You keep safe too.
The great ideas yuor homemade Coat Hanger
Thank you very much, I am glad you liked it.
Ciao una opera d'arte!!!! Veramente un attaccapanni bellissimo vero stile industriale bravo 👍🏼👍🏼
Grazie mille, sono felice che ti sia piaciuto.
You're a true artisan sir. keep em coming 👍
Thank you very much, I appreciate your comment.
יש לי הרושם 🤷שצד אחד גדול מהשני ? וצודק קודמי שאמר שזה כבד ורצוי לצבוע בלק רעיון יפה ומבריק 👍👏🌹
יש הבדל קטן מאוד בין שני הקצוות. אני אנקה את קולב המעיל הזה כך שהוא יראה אותו הדבר כמו הכתובת בחלק האחורי של שולחן העבודה שלי. תודה לך על תגובתך.
Awesome!. 👏 👏 👏 Thank you for sharing!
Thank you very much.
Another classic
Thank you very much, I am glad you liked it.
Tuyệt vời hơn cả sự mong đợi đậm chất cơ khí chúc bạn luôn khỏe và hạnh phúc.
Cảm ơn rât nhiêu.
Very nice Gavin. You can make a hanger look cool and strong enough hold a suit of armor. Take care.
Thank you very much, I appreciate your comment.
this is a reinforced hanger.😁👍
For the heavy coats, thank you for your comment.
HAPPY BARD two you my broder
Thank you very much.
oh man, another great rebar idea!
Thank you very much, I am glad you liked it.
Hi. I'm from Indonesia....
Saya sangat suka kreasi yang anda buat Mr. Gavin Clark....
God bless u 👍
Terima kasih banyak, saya gembira kerana anda menyukainya. Saya menghargai komen anda.
Wow... Saya sangat terkejut anda sangat baik berbahasa Indonesia.
Saya selalu menunggu video-video anda Mr. Gavin Clark....
Sorry, i can't speak English well... 😀😀😀
Terima kasih, tetapi saya hanya berbicara bahasa Inggris, saya menggunakan Google Terjemahan untuk mengonversi semuanya ke bahasa Inggris, sehingga saya dapat membaca dan menulis dalam bahasa lain
@@GavinClarkdiy ok no problem.... 🙏
Have a nice day....
@@royyanroman9511 Thank you you have a nice day too.
Very good indeed.
Thank you very much.
Hallo, I like the products you have made very well.👍💪
Thank you very much, I am happy that you liked it.
Отличный вариант, особенно для тяжёлой мотоциклетной экипировки!
Большое спасибо, я ценю ваш комментарий.
This is art thank you sir
Thank you very much, I appreciate your comment.
Beautiful work 👍
Thank you very much.
En la simpleza... la belleza....
Muchas gracias, estoy feliz de que te haya gustado.
Gracias Gavin excelente trabajo. = thanks Gavin excellent work a whole craft. Desde Guadalajara, México.
Thank you very much, I am happy that you liked it. Greetings from Australia.
@@GavinClarkdiy Gavin Keep going
I like using rebar and horseshoes for stuff at home. Learning heaps of bending techniques from you
That is great I am glad you find my videos helpful, I wish you the best for your projects. I love horseshoe creations also.
Very cool design
Thank you very much.
Espetacular
Muito obrigado, que bom que gostou.
Bravo!
Thank you very much.
Another great piece Gavin! You make it look easy sir! Nice job!
Thank you very much, I appreciate your comment.
Great! I enjoy your videos.
Thank you very much!
Great work as always
Thank you very much.
Top de mais .o Sr é um gênio dos vergalhões 👏👏👏👏👏👏👏👏👏
Muito obrigado, fico feliz que tenha gostado.
Great idea and will last forever...SIR GEE
Thank you very much, I am glad you liked it.
Another cool video 👊🏻👍🏻
Thank you very much.
Best!
Thank you very much.
on ya Gav keep em coming mate
Thank you very much Paul, I am glad you liked it.
SUPER 👏👏👏👍
Thank you! Cheers!
Brilliant as always Gav, well done.
Thank's Robbie
Very cool Gavin!
Thank's Tom
Muito bom. Parabéns.
Esse tiozinho é Zika com vergalhão, só projeto top.
Muito obrigado.
Robbers are terrified of this guy and they would never come anywhere near his house. Even his coat hanger is a deadly weapon.
Hahaha, Thank you, I appreciate your comment.
Great stuff mate
Thank's Ken
Great design It looks stunning.I’ll take 40 of them please. They’d make great Christmas presents. Lol
Just the 40 hardly worth getting the tools out, hahaha Thank you Bradley, I appreciate your comment.
@@GavinClarkdiy One things for sure, they won’t snap off the way the dang plastic ones do!
@@tomt9543 Yes, I don't think that these will be breaking very often, keep safe Tom.
Как всегда отлично! Буду повторять ваши изделия. Сделайте держатель для туалетной бумаги.
Большое спасибо, я рад, что вам понравилось, я включил держатель для туалетной бумаги в свой список, спасибо.
Cool. It is good to hang silk things on such a hanger. :)
Thank you. Yes I think it would be strong enough for them, hahaha
Loved it.I once made a few like it but I made the loop at an angle sticking out so I could put them together one hanging from another..unfortunately I gave them to an old mate but he doesn’t have them anymore so I have no photos. If in the future I decide to make them again I’ll send you a picture(probably no where near as good as yours)you are a genius sir.🙏
Thank you very much. I like your idea of leaning the loop out to hang more. This one is more to display a coat etc. Thank you for your comment.
Good sir ji
Thank you very much.
Ficou topdlinha 👏👏👏👍
Muito obrigado.
Bom dia ficou perfeito e bem original uma ideia se for pendurar roupa mesmo eu pintaria com verniz automotivo para não correr o risco de manchar as roupas ( a umidade do ar pode criar ferrugem e manchar as roupas)
Muito obrigado, que bom que gostou. Sim, será revestido, todo o aço bruto que eu faço é revestido ou enferrujará rapidamente. Obrigado pelo seu comentário.
Спасибо!
Большое тебе спасибо.
Thank you sir,,
thank you thank you
Thank you very much, I appreciate your comment.
@@GavinClarkdiy i am big fan sir.
Really really you're so genius sir.
Are you understand HINDI.
My ENGLISH is not good sir
@@aminoyneog8092 I do not understand HINDI, I use Google Translate to read the comments, it seems to work OK. Thank you for your reply
@@aminoyneog8092 मुझे हिंदी समझ में नहीं आती, मैं टिप्पणियों को पढ़ने के लिए Google अनुवाद का उपयोग करता हूं, ऐसा लगता है कि यह ठीक काम करता है। आपके जवाब के लिए धन्यवाद
@@GavinClarkdiy yes sir.
Pakdhe ini ada ada saja ide nya 😁, bagus pakdhe,, 👍👍
Terima kasih banyak.
Hello Gavin joli porte manteau on peut dire qu'il est pas prêt de se tordre bravo c'est magnifique bye ( France )
Merci beaucoup. Je pense que vous pourriez y accrocher une très grande veste de moto et qu'elle ne plierait pas, merci pour votre commentaire.
@@GavinClarkdiy Merci Gavin pour la réponse en Français j'adore ce que vous faite car personne ne fait ça en France bye bye
@@steph6812 Merci beaucoup.
Nice
🇧🇷🇧🇷
Thank you very much.
Дуже добре (ua).
Щиро дякую, привіт з Австралії.
I have learned many things here. And Will Make It From My Channel .Thank You
Noiceee............
Thank you very much.
Coucou, il vous faudrait une mini cintreuse ! Je vais en faire pour mes blousons, ils sont pas prés de casser.👍
Merci beaucoup. J'essaie d'utiliser des outils simples pour la plupart de mes vidéos, je vous souhaite le meilleur pour vos projets.
❤️ Absolutely Amaising! I Love it! :)))
🌼🌸🦜🐬🌺 :))))
Thank you very much Andrea, I appreciate your comment.
👏🏽👏🏽👏🏽👏🏽
Another great piece Gavin, I only just noticed I had been unsubscribed for for two months I don't know how that happened? youtube does some strange things sometimes...
Thank you very much Sparky. RUclips do some odd things and I do not know why, anyway good to have you back.
The wife won't complain that that hanger is too wimpy for sure!
Thank you very much. That would never happen here, hahaha
حلات
نشرج
اجمل
بصمه
لعيونج
نشرت شرفيني يامبدعه
شكرا لك.
I think your title should say I made a coat hanger
Yes, I can understand why you say that, as it is a coat hanger. I made this to fit right in with other industrial style things, that I make all with the raw industrial steel rebar or other steel and timber with a clear coating or sometimes black coating. Thank you for your comment.
Really like your videos!! Very creative!! couple of questions please - are you using fluxcore wire or shield gas? what size welder are you using? (I guess amperage is what I'm asking - probably can't get the same brand here in the states.) Thanks for the awesome videos, hope to see many more from you!
Thank you very much. My MIG welder is a "Unimig Viper182" 240volt and I am using shield gas. Your best bet would be to ask someone over there which would be good for you, but either way, if you search "Best entry-level mig welder" on youtube you will get a good choice from people that have on hand many MIGs to play with and would know much more than me. Hope that helps a bit.
It looks good but how you keep it from staining the clothes from rust .
All my finished products are coated, some with clear like the lettering at the back of my workbench and some with black because as they are steel they would rust if left unprotected.
What are the reasons for removing the scale before working on the rods?
At the end of the project, I clean it all up ready to coat with a finish because it is bent sometimes it is hard to get to some parts, by cleaning it before bending those parts are cleaned and at the end, it all just needs a light clean-up.
Gavin do not forget how to protect rust .....by oil or color ?
I used Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. ruclips.net/video/JA-wk62Zghk/видео.html I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out. Thank you for your comment.
Awesome, but would look way better without the "ring"
Thank you very much. Wow, I thought the ring made it look better, thank you we all have different likes, thank you I appreciate your comment.
@@GavinClarkdiy exactly it's just a matter of personal preferences, I tend to like minimalist stuff 😃 good work!
Mate that's one heavy duty hanger. Are you taken orders . :)
Thanks Douglas, yes, that's not going to bend very easy, no I am sorry I will not be taking orders, and the wife claimed that one.
👍👍👍🍇🍇🍇🍇🍇🍇
Gavin, could you fill and order for 250,000 of those hangers by next Wednesday?
OK I was going to have Friday off, but I will work half a day and get these done for you. Hahaha, I love your comment Thank you.
Mate , pliers , lots of shapes snap those bits off, not tellin ya just sayin , My King Arthur armour needs a hanger like that LOL, no shit, you could powdercoat these things Clive and sell them for??? a loi.
The i have everything brigade would be right onto it. If I had everything and money was not an option , Id have a dozen, Yeah I have jacketr and jeans
Thank you very much Darryll , I am glad you liked it, I think your King Arthur armour would look great on one of these, but the wife has claimed this one. Thanks mate.
хорошо. вес?.
Он весит 315 грамм. Он достаточно прочен, чтобы выдержать большую мотоциклетную куртку.
@@GavinClarkdiy отличное сочетание!. но, к сожалению, к большинству других вещей не подойдет. это скорее всего 1-2 вешалки для использования, больше произведение исскуства, как и большая часть того что вы делаете.
@@UraniumCrowbar Спасибо. Да, вы правы, эта вешалка предназначена для демонстрации пальто или одежды и т. Д., А не для того, чтобы вешать всю одежду.
Лайк поставил, НО! Это изделие для настоящих ценителей "Loft". Однако, повесь на неё влажную футболку и ей придёт "камуниздец"... Иди потом, отстирай ржавчину...
Все мои готовые изделия покрыты лаком, некоторые из них прозрачны, как надпись на задней части моего рабочего стола, а некоторые - черным, потому что они стальные, они ржавеют.
@@GavinClarkdiy вот хотелось бы и этот процесс видеть в выпуске.
@@user_DrIvanoff Я часто использую Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, а затем наношу верхнее покрытие Semi-Gloss Clear Coat. Это то, что я использовал для надписи на арматуре на задней части рабочего стола, вот ссылка на это видео. ruclips.net/video/JA-wk62Zghk/видео.html Я стараюсь не комментировать отделку, в каком климате вы находитесь, внутри-снаружи, много дождя, льда, вы хотите, чтобы долго и редко прикасались, или воск с протиранием каждый год. Вот почему у меня нет мнения. Пожалуйста, спросите кого-нибудь в вашем районе, что вам следует использовать, я считаю, что это лучший способ узнать. Спасибо за ваш комментарий.