We ended up exchanging this model for the slimmer version ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
Please explain that you are not wiring and the difference in battery life for those thinking this is how to install rather than wiring to existing doorbell
Hey there. Thanks for the feedback. There’s no wiring going on in the video. It’s just a video to install the mount. You can get about a month’s worth of battery life per charge.
I just installed one in my horses stall at the board barn 16 miles away. The battery only lasts about 3 weeks though. Im going to get the wired plug in camera eventually. It's interesting how much a horse actually doesn't sleep at night. And no, I don't talk to him through it. He'd panic looking for me. I didn't have an angle kit and only had two angle wall mounts that I had to stack. I went to the hardware store and bought some long wood screws.
Hey there. There’s no protective case, but the screws on the bottom lock it in. You have to have that particular screwdriver that comes with the ring to remove it. Also, the rim would record anyone trying to steal the device.
Glad you watched. Good feedback! Here’s a link to the product on Amazon. I’m going to add to the description section of my video, too. www.amazon.com/dp/B078RD43F5/ref=cm_sw_r_cp_api_glt_fabc_77ZFQPB4VJ4M8M6DF4X8
Thanks for the video very helpful as i am planning to get a video doorbell. Once you screw in the doorbell can you change the angles next time again if you change your mind?
I was pretty stupid and put this on without connecting it to the doorbell . Now it is dead and I can’t get it off to charge . Any advise on removing it?
How secure is this? Have you reviewed it since the installation? I’m interested in this type of mount but I’m weighing it up with the normal flat mount. Your feedback would really help.
I have a ring door bell but it is the one that goes throgh the spy hole on my door however I wanted to get a mount and fit it to my window in my kitchen looking out to pick up anti social behaviour on my drive way would it be possible to most a ring door bell with to the window and have a successful result or should I consider a diffrent ring door bell thanks for your help in advance and tanks for he video
Hey there! Thanks for watching! I’d suggest picking up a ring outdoor camera instead of a doorbell. That way, you can mount it where you want outside to capture whatever activity. They make ones that come with spotlights or floodlights. Or you can get the ring path lights too. Maybe that’s an option depending on where you want to record the activities.
Please let me edit videos for you, you have good information and if you send me exactly this for $20 i will make it much better and shorter which is better for viewer experience.
We ended up exchanging this model for the slimmer version ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
Absolutely
Awesome, I need more angle on my video door bell and this looks like it'll fix the wall on the right taking a quarter of the shot. Awesome video.
Yeh, seems like it would work! Good luck!
Thank you for explaining every step 👍🏼
No problem. I like details! Thanks for watching.
@@daddoesvideos Thanks again just finished installing it 5 min ago. You made it so easy! ✌️
@@felipeortiz2224 excellent! Glad it wasn’t too bad!!
Thank you, I like how you explained this.
Great! Thanks for watching.
Thank u very much this video was very detailed
Good to hear! Glad it helped you. Thanks for stopping by!
Please explain that you are not wiring and the difference in battery life for those thinking this is how to install rather than wiring to existing doorbell
Hey there. Thanks for the feedback. There’s no wiring going on in the video. It’s just a video to install the mount. You can get about a month’s worth of battery life per charge.
Very helpful. Thanks very much. 🙏🏻😀
You are welcome. Thanks for watching!
Excellent. Thank you.
Thank you for watching!
I just installed one in my horses stall at the board barn 16 miles away. The battery only lasts about 3 weeks though. Im going to get the wired plug in camera eventually. It's interesting how much a horse actually doesn't sleep at night. And no, I don't talk to him through it. He'd panic looking for me. I didn't have an angle kit and only had two angle wall mounts that I had to stack. I went to the hardware store and bought some long wood screws.
Hahah. Funny about the horses! Yeh, agree the downside if the battery being that you have to recharge every few weeks. Still a great product!
Thanks so much as you saved me some time!
Absolutely. Thanks for watching!
With the wedge kit are you able to put the actual ring inside a protective case so no one can steal the doorbell?
Hey there. There’s no protective case, but the screws on the bottom lock it in. You have to have that particular screwdriver that comes with the ring to remove it. Also, the rim would record anyone trying to steal the device.
Would help to have seen the actual title/box of the angle mount and doorbell..the flash in wasn't helpful. Thx for everything else
Amazon sells them.
Glad you watched. Good feedback! Here’s a link to the product on Amazon. I’m going to add to the description section of my video, too.
www.amazon.com/dp/B078RD43F5/ref=cm_sw_r_cp_api_glt_fabc_77ZFQPB4VJ4M8M6DF4X8
Thanks for the video very helpful as i am planning to get a video doorbell. Once you screw in the doorbell can you change the angles next time again if you change your mind?
Hey there. With the model I demonstrate in the video, yes, you can change the angle.
I was pretty stupid and put this on without connecting it to the doorbell . Now it is dead and I can’t get it off to charge . Any advise on removing it?
Can you access the screws on the bottom? Should be able to unscrew those and slip the doorbell off the mounting plate.
How secure is this? Have you reviewed it since the installation? I’m interested in this type of mount but I’m weighing it up with the normal flat mount. Your feedback would really help.
Very secure. Haven’t had an issue at all since install. Good luck!
@@daddoesvideos You’re a star! Thanks for responding, much appreciated 😎
@@monsiebabe2817 Sure thing! Hope it goes well for you!
I have a ring door bell but it is the one that goes throgh the spy hole on my door however I wanted to get a mount and fit it to my window in my kitchen looking out to pick up anti social behaviour on my drive way would it be possible to most a ring door bell with to the window and have a successful result or should I consider a diffrent ring door bell thanks for your help in advance and tanks for he video
Hey there! Thanks for watching! I’d suggest picking up a ring outdoor camera instead of a doorbell. That way, you can mount it where you want outside to capture whatever activity. They make ones that come with spotlights or floodlights. Or you can get the ring path lights too. Maybe that’s an option depending on where you want to record the activities.
Whats the name of that feather looking shrub/plant ?
Hah. Honestly, I have no idea. Just some annual that we picked up at Lowe’s because we thought it would look decent in a lot.
Please let me edit videos for you, you have good information and if you send me exactly this for $20 i will make it much better and shorter which is better for viewer experience.
Appreciate that. I’m good for now!
The blue screwdriver does not fit the ring bell. You need the orange one on Amazon
The orange screwdriver came with the modeI I bought.
@@daddoesvideos not mine, and I've bought 3 of these. The orange one is needed as well.
Normally Wire from Old Door bell
Very short..
It’s the doorbell the 2nd or the 3rd generation and what mount is that
Thanks for watching! It’s actually first generation. I flash a picture and reference the name of the mount about 20 seconds in.
a ghetto version
Too loud at the beginning. Headphones warning needed
Hah. Yeh, I guess I got a little excited at the start of this one!
Drywall outside 🤔
whoa, is that a rattlesnake i hear at a near distance ???
Gosh I hope not.
Cicadas!