Known as the FBI Load this was our issued round before transitioning to the Glock 19. In 1983 I used it in my issued 4” Model 15 to save a hostage by shooting the hostage taker from about ten feet away in a motel lobby. He was dropped, survived his wound, and the hostage was saved unhurt. In retirement my EDC is a no lock 340PD loaded w/a 110 grain +P ballistic tip.
I love 38 spl. I carry one everyday. I never expected a38 to expand.. shot placement is king. I suggest you get a Small 357 and you want have the limited power issues. I used a 4 in 38 spl with a federal load years ago. 1shot took care of the bad guy expansion of bullet was minimum. Shot placement!!!! 38s just don’t travel fast enough for reliable expansion.
Thank you for video. I'm running those in my dad's model 15 but it's a 4" barrel. Should make a difference. I run a warm wadcutter in my snub for those reasons
I HAVE TWO LOADS I USE IN MY 38 -- BOTH +P -- 140grXTP - I MODIFY(DEEPLY SCORE THE EXISTING CREASES WITH A RAZOR) THE BULLETS SLIGHTLY & THEY DO OPEN UP NICELY -- 158gr KEITH STYLE HARD CAST -- NO HP IN THIS ONE -- SATISFIED WITH BOTH OF THEM -- ONE OPENS UP GOOD ENOUGH & PENETRATES ENOUGH - THE OTHER PENETRATES LIKE MAD
Would be nice to get Chrony results. Underwood appears to be trying to deliver Buffalo Bore ballistics at a lower price point. The 38 , especially a 2 inch 38 fits in a pocket and gives an excellent combination of bullet weight in the 158 lhp , especially the Buffalo Bore. I have carried one for years, and despite small 9mm pistols, it still works for ccw, discreet carry. I have mainly Colt alloy and steel frame 2 inch revolvers. I had several S&W J frames but sold all of them except a model 60-7 plus p rated. I had a late model 37 , plus p rated but sold it. Compared to a Colt Agent or Cobra it was extremely uncomfortable to shoot with most loads. Colt should offer a lightweight plus p rated 2 inch 38. The market is there. The larger frame, better grip makes an alloy frame Volt shoot better than a steel frame S&W J frame.
Just as he is about to ID his best round HE goes off on Ranting and talks about himself and never picks a round, in other words he fails to address what this video was all about and spends all the time kissing himself ......this guy is a comic.....
He is much too impressed with himself....he is the sort of a guy who thinks he is the smartest guy in the room, real annoying type of a person.....loves to hear himself talk, in this case he is just making noise......
This character talks like he is dancing, he talks and he talks but never hits the punch line in a timely manner....this guy is a BORE to listen too.....When he does give some information it gets all clouded up so you can not identify what he is talking about........can not wait till this video is over, he has such an irritating voice....
Known as the FBI Load this was our issued round before transitioning to the Glock 19. In 1983 I used it in my issued 4” Model 15 to save a hostage by shooting the hostage taker from about ten feet away in a motel lobby. He was dropped, survived his wound, and the hostage was saved unhurt. In retirement my EDC is a no lock 340PD loaded w/a 110 grain +P ballistic tip.
This was also my first duty load out of a S&W m-66 4" barrel
I saw a video where Massad Ayoob recommended this style bullet for 38 snub.
I love 38 spl. I carry one everyday. I never expected a38 to expand.. shot placement is king. I suggest you get a Small 357 and you want have the limited power issues. I used a 4 in 38 spl with a federal load years ago. 1shot took care of the bad guy expansion of bullet was minimum. Shot placement!!!! 38s just don’t travel fast enough for reliable expansion.
Thank you for video. I'm running those in my dad's model 15 but it's a 4" barrel. Should make a difference. I run a warm wadcutter in my snub for those reasons
I strongly suggest you work on your shirt.
P365 with +P light loads don't drag you kilt or shorts down. Liberty Defense & Underwood make extremely effective, very lightweight loads for this.
🇺🇸
I HAVE TWO LOADS I USE IN MY 38 -- BOTH +P -- 140grXTP - I MODIFY(DEEPLY SCORE THE EXISTING CREASES WITH A RAZOR) THE BULLETS SLIGHTLY & THEY DO OPEN UP NICELY -- 158gr KEITH STYLE HARD CAST -- NO HP IN THIS ONE -- SATISFIED WITH BOTH OF THEM -- ONE OPENS UP GOOD ENOUGH & PENETRATES ENOUGH - THE OTHER PENETRATES LIKE MAD
Would be nice to get Chrony results. Underwood appears to be trying to deliver Buffalo Bore ballistics at a lower price point. The 38 , especially a 2 inch 38 fits in a pocket and gives an excellent combination of bullet weight in the 158 lhp , especially the Buffalo Bore. I have carried one for years, and despite small 9mm pistols, it still works for ccw, discreet carry. I have mainly Colt alloy and steel frame 2 inch revolvers. I had several S&W J frames but sold all of them except a model 60-7 plus p rated. I had a late model 37 , plus p rated but sold it. Compared to a Colt Agent or Cobra it was extremely uncomfortable to shoot with most loads. Colt should offer a lightweight plus p rated 2 inch 38. The market is there. The larger frame, better grip makes an alloy frame Volt shoot better than a steel frame S&W J frame.
Looks like a speer hollow point bullet
Norma makes a nice 158gr jhp and it's a standard pressure.
Yeah they are nice their 45acp hp is nice too
I bought a box of that Norma safeguard 158 grain standard pressure hollow point ammo, for my model 15 smith, yet to see a test on it though.
I'd like to see a similar test using Wadcutter bullets. Preferably those rated at 800fps.
huh huh huh huh he said load😂😂😂
Buffalo Bore or Underwood hcwc are options
Just as he is about to ID his best round HE goes off on Ranting and talks about himself and never picks a round, in other words he fails to address what this video was all about and spends all the time kissing himself ......this guy is a comic.....
I would not feel confident with any 38 revolver with les than a 3" barrel.
1 CORINTHIANS 15:1-4 KJV
JOHN 3:36 KJV
JOHN 6:47 KJV
BELIEVE in JESUS CHRIST and be SAVED!
Need to work on your camera work and focus
He is much too impressed with himself....he is the sort of a guy who thinks he is the smartest guy in the room, real annoying type of a person.....loves to hear himself talk, in this case he is just making noise......
This character talks like he is dancing, he talks and he talks but never hits the punch line in a timely manner....this guy is a BORE to listen too.....When he does give some information it gets all clouded up so you can not identify what he is talking about........can not wait till this video is over, he has such an irritating voice....
What’s that t-shirt mean? Just wondering
Just a humorous take on my spirituality.
Stopped watching the video when I saw that shirt
@@bruceliggett8036Your loss, bigotry reinforces ignorance.