RC Logger Eye One Xtreme one side (motor / rotor) won't start | Fix it now! [The Green Bandit]
HTML-код
- Опубликовано: 27 авг 2024
- This video contains:
- An explanation of how I fixed my one sided propeller start failure.
- How to reset your remote control
- How to fix a cracked leg/axle
- How to reset your gyro
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
Had the 2 side prob jesterday- a hard reset (battery out wait a while and put it in did the job)
my eye one extreme had a hard landing and now when i turn it on all it does it beeps then shuts off, how do i fix that?
How you do hard reset please both my right sided props not spinning
Its a burned out esc. Its electrical u have the burned out component none of these idiots know what they are talking about.
Hi don't know if this helps when in what ever mode colour lights starts with left motors only spin for a few secs light flashes red then stops . does this help . with fixing motors not spinning on right side cheers mate
Well the red light blinking fast just tells you you have a problem.
The Green Bandit so no unfortunately it doesn't help much
what sticker is on your board.? I got the latest firmware and the round green circular sticker on it so I never had this problem!
it's an orange sticker. It's been a while though and the board died...
since this video I've had to replace the fcb twice! it's ridiculous. I'm going to have to write to RCLogger about this.
+The Green Bandit I still fly mine with pleasure, just got 4 of the 1150mah battery s
+hobby yeah the 1150 mah batteries are great :)
I have an orange sticker what does it mean ?
hi was fc board got love it want to fit battery alarm any help
gadgetman 404 Just buy a buzzer and link it to the battery ;)
It's a very easy process (just match the colors on the cables)
Got liposuction alarm but when gets to your level it cuts power so not good if you high oh well
hmm sounds like you're doing things the complicated way you don't want your alarm to cut the battery that is super dangerous imagine if you're flying above your neighbourgh's pool ^^. Try just hovering your EOX while timing it and then in the future use your timer set for one or two minutes less than hover time. Or you can get a "Buzzer" (shouldn't cuz the circuit).
Ya this one cut power to esc in plain can glide down etc but not on a quad
Yes it's simple. Buy a battery alarm. Solder wires between the batteries as if you were soldering a 2s battery balance lead. Attach the newly made balance lead to the alarm and you've got a battery alarm; )
I've tried that it took ages to take after binding but finally did it still don't work
Hi! Well unfortunately sometimes many problems show the same symptoms. If you followed the video then make sure that; I know this information may be redundant but make sure; the connections are properly tightened and that the rotors are symmetric (that they aren't bent)?
Thanks checked all that finaly got it to bind but still don't work any thing else I don't want to send it away they don't help muck only one place in uk they didn't even say to try what your video says they don't know what to do just say send it in
gadgetman 404 Well if you crashed hard, then you should buy a new Chip. It's relatively cheaper than buying the whole thing new but it will fix the problem immediately instead of making your instruments unreliable ;)
Flite controller board
gadgetman 404 yes exactly the flight controller board. Hope you find a solution soon!
9 minutes of my life I will never get back. 9 minutes to say I reset my radio transmitter. I could do it in less the 1.
Also are you in the CIA or are you just a wanted fugitive?
You are right. I did spend to much time explaining all sorts of fixes to problems that weren't advertised. I will try to avoid that in future videos. Thanks for the feedback.
And, no, I am not a fugitive. I just feel the internet is a safer place when you wear a bandana. Also I found the green scarf did the trick to link my pseudonym and the video ^^.
This guy is an idiot grown man in 2019 fhinks he some super gotta cover , u covered ur face cause u dont want any one recognizing and knowing ur an idiot , move the sticks all around he says lol what an idiot
mine wont work. tried everything
+Kingsley Drapete Well as a final solution to your problems there are new controll boards available for sale at 65 dollars online. Sorry for the late answer btw I must have missed your comment for some reason!
Why cover your face? Lol.
Hi, well to keep things short, I'd rather be as discrete as possible. RUclips (=Google) already knows so much about us all in exchange for this great ~free service, so I'm trying to keep them from putting a face on my data. I'm not paranoid just careful. I might uncover it in the future if I need to, but until then, I'll be known as the green bandit.
The Green Bandit Understandable.
No nigga u paraboid as fuck , they allready have ur face with your phone. Fb instagram twitter and they can turn on the camera when ever they want even when ur watching porn , this guy. I bet u road the short bus
He will wake yo a million notifications on this post. Putting up fake videos u wants click how i notifications. Lol this idiot will block before the fun starts
Another p.o.s. **** I'll just rip it apart for the motors and mounts. That's about all it's good for
Dude i just have to ask , whats up with the whole ski glasses and scarf? U have some type of ugliness u dont want to show ? Sorry man i just cant pay attrntion to what u are doing not seen the person thats talking is bothering ,
I changed the props,the one`s of a dromida ominus, they last much longer !!! ruclips.net/video/Ak46mrB0Kz0/видео.html
EASY.RC RcFunHolland Hey! Thanks for the tip. You should try gemfan 6045. They are amazing! Robust and give great pushing force! I'll make a video soon with them in it.