I've been watching your videos for a year or so without even having a 3d printer, I get my Ender max neo Monday and I'm excited to finally utilize all the information you have given us in your videos. My wife even recognized your voice the other day after 7 months of not watching anything 3d Printing related, But since then I bought a PC and now a 3d Printer and I'm excited to start printing and working on some displays for my space.
Exactly what I was trying to tell another RUclipsr that took so much time finishing his textured mask, when you get it save the frustration of sanding and prepping and painting just by printing it installing the magnets deburring done
These masks are amazing! Just got into 3D printing and Franks Channel is my staple page and my go to for everything 3D printing! Amazing entertaining content that is so helpful!
@@lytatroan there are tutorials online if you Google them but its basically purchasing an adapter to allow it connect to the PC and then using a software to control the camera.
Try lining the inside of the cowl(wolverine) with black felt to help stop the light from showing the magnets. You can buy felt sheets from most fabric stores.
Love the Barbie T-shirt , genius design and print,, awesome job , I like how we can still hear your voice pretty well in the DP mask, what's the ventilation/breathability like?
Instead of the elastic bands, I'll use painters tape to hold helmet parts in place while setting things up. Did that for my Iron Man, Mando, and FNAF masks.
Love your videos so much! Could you do a short video on how often we should maintenance our printers, where we should put the grease, and how tight the belts should be? I've always been better at software than hardware, and I'm sure I'm not the only one with a printer or three that needs some help ❤
@user-pl4ym2hs8j I have many printers he does And stop treating people like they woke up yesterday! If Google had the answers I needed, My CRM4 wouldn't be out of commission for 4 months
Can you point us to the strips of elastic bands you used? It looks like it comes in a roll but I don't see it in the description or on your mask parts on Amazon.
Thank you for this video! I tried printing my first mask (Wolverine) this week on my A1 mini and half of it was good, the other half had a lot of problems. Hopefully this one will turn out better 🙏
The Wolverine helmet on the iron man body reminded me of the X-Men space outfits. Around the time when Wolverine gets the Adamantium ripped out by Magneto.
Hey frank! I’ve been watching your videos since you made that mark 85 suitcase, and I finally decided to get a 3d printer for myself and start making these props aswell. I searched on Amazon and the #1 bestseller is the FLASHFORGE Adventurer 5M 3D Printer. Do you have a review for it anywhere, would you reccomend it? Thanks
I felt your pain when putting the magnets on the Deadpool mask. I’m dealing with that issue right now it falls apart so easily. A tutorial on how you did the elastic band system would be great!
Thank you for the elastic tip! I bought a ladypool printed mask to wear to a con in about a week and I’ve been DREADING the possibility of it falling apart at the con 😅
great video just printed mine, QUESTION ---> what glue do i need to glue the clothing elastic made of fabric to the inside of the helmet please bro????? I printed mine in PLA+ if that makes any difference, tried superglue and it won't stick
Hey Frank, I wanted to ask you what app(s) you would suggest for 3d scanning. I want to scan my head to better scale prints and I just wanted to see if you had any idea on which is best. Preferably the cheapest route is best but anything helps
Hey Frank, awesome prints! I have thesd files and they are super awesome to print. Can i just ask, why do you use glue on your textured pei sheets? Or was this residue from another print? Thanks bud
Hey Frank! Do you happen to have any tips for printing foot armor working? I haven't decided yet if I want to do shoe covers or actual printed shoes for my Metroid Dread Samus cosplay suit, and even then, I have no idea how I would be able to scale them efficiently, since they're so much different than the rest of the pieces.
Hey Frank, I swear a while back you mentioned that there was an stl of a head on Thingyverse or somewhere that was good to use for sizing up a helmet. Was that you? if so can you tell me where i can find it please because i seem to of forgotten...
How come you use the tree trunk looking supports instead of the basic ones, I’m assuming it might be something you can change in the settings of the programme
you should do more demon slayer swords like sanemi and obanai and gyomei since their swords have been shown in the hashira training arc mabye giyu and shinobu's to
Cool mask! Just wondering, where did you get the deadpool suit from? I'm working on a deadpool cosplay of my own and it looks to be something that's budget friendly.
I hope this comment is aloud, if not I sincerely apologize. Darkwing Dad posted a video suggesting to print the face piece on its side so that the finishing layers are on the magnet parts to prevent the ringing effect from top layers on the nice texture. hope this might help and sorry if it is not ok.
What kind of glue and spray do you use to glue pieces together? I have been searching for a good glue for my 3d prints and I don't know what to use... 3d gloop costs more to ship shan the actual product ( I live in sweden). All super glues I have tried ruins the print with a white residue on the print so I don't want to use that.. Suggestions?
Needs more dancing.
Then get your ass over here, you silly Canadian goose ❤️
@@FranklyBuiltI need the hacksmith with the cowl now
I agree with you, more hips😂
@FranklyBuilt Your crazy! Just use your Ironman suit!
@@FranklyBuiltwe need to see the moves!!😂❤🎉
The fact that there are models so good you don't 'need' to prime and prep it up is amazing!
hey that's me!
He’s gotta do a video on your awesome daredevil mask file!
Lol
Can you send me a free stl file of a good mask?
@@jozebeast22o98 he has some free files available, i’m not sure which masks are included in that selection though
Your wolverine mask is great!
I've been watching your videos for a year or so without even having a 3d printer, I get my Ender max neo Monday and I'm excited to finally utilize all the information you have given us in your videos. My wife even recognized your voice the other day after 7 months of not watching anything 3d Printing related, But since then I bought a PC and now a 3d Printer and I'm excited to start printing and working on some displays for my space.
Exactly what I was trying to tell another RUclipsr that took so much time finishing his textured mask, when you get it save the frustration of sanding and prepping and painting just by printing it installing the magnets deburring done
These masks are amazing! Just got into 3D printing and Franks Channel is my staple page and my go to for everything 3D printing! Amazing entertaining content that is so helpful!
Whoa, those 3D sculpts look so incredible. It has that rubber glossy finish to them.😮
If anyone has an old Xbox 360/Xbox One Kinect camera they can be used on a PC to produce great quality 3D scans!
How would I go using my old kinect for it
@@lytatroan there are tutorials online if you Google them but its basically purchasing an adapter to allow it connect to the PC and then using a software to control the camera.
The helmets turned out beautiful, I will definitely print them.LFG❤️💛
Never have I been this early or this hyped for a video!
I'm so ready to learn to make these for myself!
Franks got moves 😂😂😂😂
Try lining the inside of the cowl(wolverine) with black felt to help stop the light from showing the magnets. You can buy felt sheets from most fabric stores.
Dude, you are ripped! Kudos
Great Video Frank! How about Yosh Studios Death Knight helmet? Looks like it's all textured. Could be another cool one to do
Love it! So cool! Thanks for doing this one.
Dude, honestly I might just make this, looks so clean and so good
Love the Barbie T-shirt , genius design and print,, awesome job , I like how we can still hear your voice pretty well in the DP mask, what's the ventilation/breathability like?
would love to see you apply a black oil wash to them to highlight all the little details!
Now that I’ve seen Frank dance as Deadpool my life is complete 😂
Instead of the elastic bands, I'll use painters tape to hold helmet parts in place while setting things up. Did that for my Iron Man, Mando, and FNAF masks.
The elastic bands are permanent. They’re not to hold it while setting up. Tape will break eventually.
@@FranklyBuilt thanks. Probably should have watched another minute before typing.
Measured the magnet holes in Fusion. 10mm x 2mm magnets will fit in the holes with no scaling FYI
Love your videos so much!
Could you do a short video on how often we should maintenance our printers, where we should put the grease, and how tight the belts should be?
I've always been better at software than hardware, and I'm sure I'm not the only one with a printer or three that needs some help ❤
That subject definitely varies per printer. Google will definitely be your best friend for that one.
@user-pl4ym2hs8j I have many printers he does
And stop treating people like they woke up yesterday! If Google had the answers I needed, My CRM4 wouldn't be out of commission for 4 months
I just printed the Wolverine helmet from Do3d last weekend on my K1 max using Elegoo rapid PLA
Love it I also printed a deadpool and wolverine helmet
That gasp when the eyes came out 😂
Man the editing quality on this 🤌
I watch your videos one of the 3D printers it was like $300 I forgot the name of it who is so helpful I got that was my very first 3D printer 🖨️
@@angelanino1225 super happy to have you in the hobby now!
Those are sick!
Hey Frank, they both came out great!💯👏🏼👏🏼👏🏼 , thank you for that tip on the elastic #smart
ps. Can we get the full dance number…😂
Can you point us to the strips of elastic bands you used? It looks like it comes in a roll but I don't see it in the description or on your mask parts on Amazon.
Totally printing these. I think the bottom of the Wolverine mask and the eyes of the Deadpool mask would benefit from being TPU, so I might try that.
Thank you for this video! I tried printing my first mask (Wolverine) this week on my A1 mini and half of it was good, the other half had a lot of problems. Hopefully this one will turn out better 🙏
That's SO Amzing!
YEES I NEED THIS VIDEO IN MY LIFE
Awesome masks!
The Wolverine helmet on the iron man body reminded me of the X-Men space outfits. Around the time when Wolverine gets the Adamantium ripped out by Magneto.
11:40 - Bro went from Wolverine to Magneto
Hey frank! I’ve been watching your videos since you made that mark 85 suitcase, and I finally decided to get a 3d printer for myself and start making these props aswell. I searched on Amazon and the #1 bestseller is the FLASHFORGE Adventurer 5M 3D Printer. Do you have a review for it anywhere, would you reccomend it? Thanks
Great vid! Is that suit the one from ProCosplay??
I felt your pain when putting the magnets on the Deadpool mask. I’m dealing with that issue right now it falls apart so easily. A tutorial on how you did the elastic band system would be great!
Use stronger magnets
You can also use Duct Tape inside, to keep the pieces together :)
I would love that wolverine mask.
Sick Helmets!!!
I Just finished mine a couple days ago wore them to the movie theater greatest decision I’ve ever made
Great work! Do you think it is worth to overscale the helmet/mask a bit in order to add think foam pads inside for confort?
9:02 the maker's name is Sean's Crafts
Thank you!!
@@FranklyBuilt no prob man
Also I printed the Deadpool helmet scaled up on my flashforge adventure 5
The stuffed unicorn was funny.
hey frank im going to get a 3d printer i have never done this before what size printer do you recomend for making helmets? pls respond love the vids
Only Frank can pull off a masculine barbie shirt
him and PSR 🤣
Awesome helmets. Great tips. May I ask what yellow you used?
Why does that slicer look exactly like the bambu software?
Another great video.
Thank you for the elastic tip! I bought a ladypool printed mask to wear to a con in about a week and I’ve been DREADING the possibility of it falling apart at the con 😅
great video just printed mine, QUESTION ---> what glue do i need to glue the clothing elastic made of fabric to the inside of the helmet please bro????? I printed mine in PLA+ if that makes any difference, tried superglue and it won't stick
Hey Frankly those led eye´s you got where did you get them from ??
Hey Frank, I wanted to ask you what app(s) you would suggest for 3d scanning. I want to scan my head to better scale prints and I just wanted to see if you had any idea on which is best. Preferably the cheapest route is best but anything helps
Hey Frank, awesome prints! I have thesd files and they are super awesome to print. Can i just ask, why do you use glue on your textured pei sheets? Or was this residue from another print? Thanks bud
Nah it’s glue. Safety
@@FranklyBuilt got you, thanks!
Casually swinging around Vice Captain Hoshina’s sword in the beginning , I see you 👀👀
I’d like to see a build of The Stranger aka Darth Teeth’s helmet from The Acolyte. Probably the best thing from the show
Have you done claws yet? Who's do you like the best?
Nah and honestly I didn’t plan to make then
What magnets do you use for the mask
Awesome. Thanks.
Maybe you should 3d print a cosmic fury red ranger helmet
What did you use for the eyes? Do you know where I can purchase it?
is there links for the magnets and glowing eyes
Would you recommend sunlu red or cherry red pla+?
Hey Frank! Do you happen to have any tips for printing foot armor working? I haven't decided yet if I want to do shoe covers or actual printed shoes for my Metroid Dread Samus cosplay suit, and even then, I have no idea how I would be able to scale them efficiently, since they're so much different than the rest of the pieces.
Always do shoe covers. Way easier
Where did you get your Deadpool Cosplay from? And would you recommend it?
Are those Captain Hoshina's swords from Kaiju 8?!?!
Did you super glue or weld the elastic bands in @franklybuilt
Super glue
Have you tried flexible PLA with this build?
I’m thinking the head flexible and the sides normal pla.
Hiya dude, I'm wondering what 3d scanning app would you recommend? I'm on android if that makes a difference
How do you get prints taht are so clean???? Im always havjn issues
Hey Frank, I swear a while back you mentioned that there was an stl of a head on Thingyverse or somewhere that was good to use for sizing up a helmet. Was that you? if so can you tell me where i can find it please because i seem to of forgotten...
11:40 Frank the minion ... uuuhm no thnx xD
You, Sean's craft and hacksmith should work together to make the avengers
This might be a silly question but did you just mirror the side piece?
Yep
From Wolverine to Magneto in a split second 11:40
I think it looks a little better with that little bit more black
Where? What are you talking about
What is the Deadpool costume from the beginning of the video? Where did you get that?
Etsy
I’ve been looking at the Bambu Lab A1. Would that be big enough for masks like these?
How come you use the tree trunk looking supports instead of the basic ones, I’m assuming it might be something you can change in the settings of the programme
More organic and better
Can you point us to the strips of elastic bands you used?
Where can I find the velcro straps that you used for the Deadpool Helmet?
It’s just elastic from Amazon
@@FranklyBuilt Got it, thank you!
Awesome
Hey what soldering iron do you use? I tried using the one I already had for other stuff and it doesn’t work as well as I had originally hoped.
A $6 Amazon one
you should do more demon slayer swords like sanemi and obanai and gyomei since their swords have been shown in the hashira training arc mabye giyu and shinobu's to
Cannot get the website to open to obtain the print files. Did it get taken down?
Yoooo, where did you get the Deadpool suit from?
Etsy
Cool mask! Just wondering, where did you get the deadpool suit from? I'm working on a deadpool cosplay of my own and it looks to be something that's budget friendly.
Etsy
@@FranklyBuiltok thank you!
@@FranklyBuiltI can’t seem to find the same suit that you bought, can you provide me with the creator name?
@@randomperson3093I don’t have the info anymore. But plenty of other sellers are on there
how long did they take to print? i only have 1 p1p but i really wanna do these but need to plan the time
A day each roughly
@FranklyBuilt thank you. Wow can't believe you messaged back. Like speaking to a celebrity
Thanks man
Great channel
Where did you get the deadpool suit from? You did not link that one.
Etsy
all I could think about with the texture on the wolverine mask is the texture from kickballs lol
YESSSSS
how did you get the image of your head for sizing?
Love it
I don't know if i can make it, but i just got Elegoo Neptune 3 Plus. I am SO happy with this machine, but never made helmets and masks. Maybe, maybe.
Do you have the LED eyes link?
I hope this comment is aloud, if not I sincerely apologize. Darkwing Dad posted a video suggesting to print the face piece on its side so that the finishing layers are on the magnet parts to prevent the ringing effect from top layers on the nice texture. hope this might help and sorry if it is not ok.
It’s fine but on a good enough printer you can’t even see the final ringing on the top layer.
i just figured that it is another option. I just got 2 K1 maxes thanks to your reviews and can't wait to get my preordered K2.
where i can get those magnets?
What kind of glue and spray do you use to glue pieces together? I have been searching for a good glue for my 3d prints and I don't know what to use...
3d gloop costs more to ship shan the actual product ( I live in sweden). All super glues I have tried ruins the print with a white residue on the print so I don't want to use that..
Suggestions?
Cyanoacrylate glue
I couldn't get the magnets to hold together very well. Any tips?